not the 24 hour turn around event we all take for granted
these days.
73
John K5MO
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
___
Boatanchors mailing list
Boatanchors@puck.
NOS sets , all
non-ham band
John
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/lis
That sure is a nice looking rig! Well worth a look.
John K5MO
At 08:25 AM 5/13/2014, Bob Jackson wrote:
261478762130
III
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
At 07:33 PM 5/28/2014, Chuck McClurg wrote:
I am also looking for a H.F. RBM-5 and the Control Unit CAY-23278A which
does the P.S. switching between the two receivers.
I think I can help with both :-)
---
This email is free from viruses and malware because avast! Antivirus protection
is
Hi Gary,
I have one of those and use it when I get on the Vintage SSB net (which is
not nearly often enough) with a CE20. It works well with that level of drive
If you're still stuck for a manual let me know!
John
At 09:41 AM 9/29/2014, Gary H. Harmon, Jr. wrote:
I picked up a ragged
Hi Gary,
I've never paid a lot of attention to it, but I recall about 200W PEP out
without pushing it hard on 20m . It's been enough to not worry about :-)
It's a good era to match the CE gear and roughly the same size.
73
John
At 07:04 PM 9/29/2014, Gary Schafer wrote:
Hi
At 06:47 PM 4/13/2015, Jim Bromley, K7JEB wrote:
How many Extra-class hams really know what is going on
inside a modern transceiver with a DSP IF, much less
a complete SDR?
_
None, but I'm not sure that proves anything.
It's all analog at one level or another.
John K5MO
---
Thi
Same here... it's not aging so much as being cured.
John K5MO
At 08:26 PM 7/26/2015, W4AWM--- via Boatanchors wrote:
Got one here. So far unrestored. 73, John, W4AWM In a message dated
7/26/2015 1:42:01 P.M. Eastern Daylight Time, oneets...@gmail.com
writes: Gary has a HT-9 for sa
It was on as scheduled here, and was interesting. There wasn't a ton of
information as...there's not a ton of public information, I suppose.
First time I've watched TV in months! Thanks for the tip
John K5MO
---
This email has been checked for viruses by Avast antivirus
At 12:50 PM 9/8/2015, The Pollacks wrote:
Good news! Thanks for sharing.
(I trust that all those who somehow blamed the government for this will now
give the government credit for its restoration!)
Nah, as usual, private enterprise to the rescue!
:-)
73
John K5MO
---
This email has
lize the comparison between now and 1960.
John K5MO
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
I'm sure the usual Federal pinheads will doom these to the briny depths.
We need to get Dick Dillman and his posse to mount a night time raid,
and free these rigs from their government-mandated fate. Loose the
Greenkeys warriors!
John K5MO :-)
On 6/1/2017 5:13 PM, Cliff Miller
On 6/1/2017 11:59 PM, c...@ivtm.org wrote:
I could not agree with Bill more. I am tired of seeing people take pot
shots
Ain't America great? Everyone gets to have an view of things.
An ex-pinhead,
John K5MO
___
Boatanchors mailing
No, but I'm interested if you find the info Wilson
John
On 9/12/2017 6:11 PM, Wilson Lamb wrote:
Does anyone have info on this RX?
Used by Byrd in 1928.
Wilson
W4BOH
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nethe
Mondo soldering iron on the shaft for a min or two ... like a 300 watt
American Beauty, after your favorite penetrating oil.
No hammers please... I'm assuming you want to re-use the pot and the radio!
73
John K5MO
On 9/25/2017 10:55 AM, Skip Simmons wrote:
Believe.
(snipped for
Overstuff everything. It'll get there OK.
Foam in place rocks... I had a Cosmophone shipped here with that ... it
arrived fine and was worth the extra care .
John K5MO
On 11/22/2018 2:17 PM, Bob Krassa wrote:
A few days ago, in the very informative discussion about trashed pack
vers under huge pressure to hit and run.
John K5MO
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
These are really great tuners. About 10 min with the soldering iron will
provide a "bypass" position as well. I'll not part with mine
Weight wise, these are a good match to the Apache :-)
I'm really surprised this hasn't sold.
John K5MO
On 5/28/2019 7:51 AM, Wil
Best New Years wishes to you all
73
John K5MO
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
rical tape on the HV conductor ("if
we just add a LITTLE more insulation here, we'll be AOK"!)
There's undoubtedly some method to the madness here, but it's not apparent.
I'd love to poke around the rest of the basement/dungeon. Wonder what's
in the briefca
X-190
including an article I wrote on modifying the bandswitch
for more ranges below 10 MHz. Collection available
in a rar file at his site
<http://mark.rehorst.com/Allied_SX-190/>
Click on "here" to get it.
John
KK6IL
Bob Jackson wrote:
>
> Guys - I have no idea a
e there is 'chimney effect' air movement in the chrome shields,
but they don't usually serve to reduce the tube envelope temperatures.
73
John
K0KHZ
On 5/25/2014 4:48 PM, Bob Jackson wrote:
I always assumed that tube shields were used to keep stray RF either in or out
of the tube
CB amps spam now? Seriously??
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
AC plug on the two-conductor AC cord, but even that will
only give the impression of a modern upgrade to some level of safety.
The Chassis Is Still Hot. What problem are we solving??
73
John K0KHZ
On 8/6/2019 3:28 PM, Glen Zook wrote:
I don't know of any article on doing this. H
Has anyone ever put an Ameco AC-1 on 20 or 15?
Thanks,
John
K7VGF
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
Can anyone tell me if the transformer in the Heathkit IM-11 VTVM
is interchangeable with the transformer in the Heathkit V-7A VTVM?
Thanks,
John
K7VGF
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo
Does anyone have a schematic for the Technical Radio Company model
LRR-5 receiver?
John
K7VGF
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
Still looking for a schematic for my beloved Technical Radio Company LRR-5.
John
K7VGF
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
Does anyone have a low-pass filter assembly for the
Heathkit HX-11?
Thank you,
John
K7VGF
___
Boatanchors mailing list
Boatanchors@puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors
29 matches
Mail list logo