Hi Josselin,
Thanks for your help with this issue. I tried ur suggestion and got the
same results. However, the comment about CSM legacy support gave me a
hint from which I managed to "solve" it: my laptop uses OSBoot, and I
always boot with the Seabios payload, but booting from the Grub
comm
Hi david,
david larsson writes:
> What should I try next?
Can you try the latest installer iso in the meantime, the one at [1]?
[1] https://guix.gnu.org/en/download/latest/
Best,
--
Josselin Poiret
Hi,
Im having this exact same issue: I can enter the password once to unlock
the disk, then after selecting the grub entry I am stuck at the Guix
grub screen.
I have used terminal based "manual" install, graphical guided install
for full disk - all on one partition - and graphical guided inst
On Sat, Mar 28, 2020 at 10:39:28PM +0100, Reg wrote:
> Hi Florian,
>
> Thank you very much for getting back to me! CSM legacy support was already
> enabled on my ThinkPad but guess what.. *Disabling* it fixed the problem! My
> computer is booting without issues now with a fully encrypted disk.
>
Hi Florian,
Thank you very much for getting back to me! CSM legacy support was
already enabled on my ThinkPad but guess what.. *Disabling* it fixed the
problem! My computer is booting without issues now with a fully
encrypted disk.
Thank you so much!
Best regards,
Reg
On 2020-03-28 13:42,
Hello Reg!
On Thu, May 23, 2019 at 11:41:40PM +0200, Reg wrote:
> Guix won't boot on my ThinkPad T430 after an installation with fully
> encrypted disk:
A friend had an issue that looked similar on an HP laptop (no
Thinkpad) in Guix System. GRUB got stuck either after entering the
encryption key
Hi Ludo,
SSH does not work. No response to ping.
Thanks for the support,
Reg
On 2019-06-01 00:01, Ludovic Courtès wrote:
> Hi Reg,
>
> Reg skribis:
>
>> On 2019-05-30 14:10, Giovanni Biscuolo wrote:
>>> Are you sure your laptop does not boot at all? I mean: can't you switch
>>> to a different t
Hi Reg,
Reg skribis:
> On 2019-05-30 14:10, Giovanni Biscuolo wrote:
>> Are you sure your laptop does not boot at all? I mean: can't you switch
>> to a different tty (CTRL-ALT-F2) and see a console login?
> Nothing happens when I press CTRL-ALT-F2, F3, ...
> The only key combination that has any
Hi,
On 2019-05-30 14:10, Giovanni Biscuolo wrote:
> Are you sure your laptop does not boot at all? I mean: can't you switch
> to a different tty (CTRL-ALT-F2) and see a console login?
Nothing happens when I press CTRL-ALT-F2, F3, ...
The only key combination that has any effect is CTRL-ALT-DEL.
T
Hello Reg,
Reg writes:
[...]
> (bootloader
> (bootloader-configuration
> (bootloader grub-efi-bootloader)
> (target "/boot/efi")
> (keyboard-layout keyboard-layout)))
> (mapped-devices
> (list (mapped-device
> (source
> (uuid "e613d30e-c46
Hi Giovanni,
Here's the content of /mnt/etc/config.scm:
--8<---cut here---start->8---
;; This is an operating system configuration generated
;; by the graphical installer.
(use-modules (gnu))
(use-service-modules desktop networking ssh xorg)
(operating-system
Hello Reg,
Reg writes:
[...]
>> Anyway, to check if GPU is the problem here could you please add
>> "modprobe.blacklist=radeon" [2] (or vga=791 if this does not work [3])
>> to the "linux" kernel arguments and report back the error messages, if
>> any?
> No error message & still the same issue
Hi Ludovic and Giovanni,
>> Does your compute have an AMD graphics card that could lead the kernel
>> (KMS) to wreck havoc during initialization?
No AMD but...
> AFAIU ThinkPad T430 could come with an additional "NVIDIA NVS 5400M" GPU
> [1] that is very Linux _unfriendly_; you can check this by bo
Hello Reg,
Ludovic Courtès writes:
[...]
>> On boot, I am being prompted for the encryption key. So far so
>> good. The Grub menu is then displayed and disappears after a few
>> seconds – as it should – after which the computer is stuck on the
>> Grub
>
> Weird.
The strange behaviour here is t
Hello,
Reg skribis:
> Note: There was some discussion about this on IRC a couple of weeks ago.
>
> Guix won't boot on my ThinkPad T430 after an installation with fully
> encrypted disk:
>
> * First, at the end of the installation, I'm getting the following error
> message multiple times: "devi
15 matches
Mail list logo
