It seems that macppc snapshots are broken on this model.
The RAMDISK kernel never reaches userland, it gets as far as mounting
root (root on rd0a..) and then.. stops.
Unfortunately, I'm not sure when this started, I haven't powered on this
system since I moved.. my bad. :-)
USB device insertions/removals continue making noise, so, it's not
completely dead.
No problems with release, dmesg attached.
-Bryan.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California, All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.2 (RAMDISK) #195: Mon Jul 30 17:00:39 MDT 2012
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 268435456 (256MB)
avail mem = 245751808 (234MB)
mainbus0 at root: model PowerMac4,1
cpu0 at mainbus0: 750 (Revision 0x2215): 500 MHz: 256KB backside cache
mem at mainbus0 not configured
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 Pro" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
"programmer-switch" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
"davbus" at macobio0 offset 0x14000 not configured
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
"i2c" at macobio0 offset 0x18000 not configured
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 driver 0: <MAXTOR 4K020H1>
wd0: 16-sector PIO, LBA, 19536MB, 40011300 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-7121, AH36> ATAPI 5/cdrom
removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revsion 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revsion 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address
00:03:93:44:39:74
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub1 port 1 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev
1.10/1.22 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/1.22 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/1.22 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 3 configuration 1 interface 0 "Logitech Apple Optical USB
Mouse" rev 1.10/16.02 addr 4
uhidev2: iclass 3/1
uhid2 at uhidev2: input=3, output=0, feature=0
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@1:/5.2/macppc/bsd.rd
root on rd0a swap on rd0b dump on rd0b
WARNING: clock gained 103 days -- CHECK AND RESET THE DATE!
