ts
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6dae9fb8b0d28ded.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
confirm it ?
>
> --
> Matthieu Herrb
>
>
Yes, xconsole stays running with this change in place. Thank you!
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
Hello,
I'm encountering severe instability problems while trying to use a Radeon
RX 550 2GB GPU with the radeongpu driver. I'm using a fresh install of the
latest amd64 snapshot and the just-updated amdgpu-firmware-20200619. I'm
driving a single 1920x1080 display over HDMI.
Sometimes I'm able to
, signaled seq=22, emitted seq=22
[drm] *ERROR* Process information: process pid 0 thread Xorg pid 17620
[drm] *ERROR* ring comp_1.0.1 test failed (-60)
Please let me know if I can provide any other information. Would a
donation of a video card be helpful to you?
Thanks,
--
Joe Gidi
j...@ent
to create an OMT
compositor. (t=1.98663) |[3][GFX1-]: GPU process disabled after 2 attempts
(t=2.07299) |[4][GFX1-]: Receive IPC close with reason=AbnormalShutdown
(t=2.07318) [GFX1-]: Receive IPC close with reason=AbnormalShutdown
Thanks,
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
no longer being initialized properly during the
boot process.
Full dmesg of the last working snapshot kernel and 'eeprom -p' output are
attached. Please let me know if I can provide any further information.
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfri
sabre lite problems with fec and
> also recent problems with the i2c rtc on cubox.
>
> ok kettenis@
> ----
>
> On Mon, Sep 12, 2016 at 08:51:46PM -0400, Joe Gidi wrote:
>> My Wandboard Quad is unable to successfully cold-boot with any snapshot
>>
Correct the path to the iomuxc fdt node so pinctrl setup will run.
> Noticed when looking into a regression on sabre lite with fec(4)
> bisected by matthieu@. This fixes the sabre lite problems with fec and
> also recent problems with the i2c rtc on cubox.
>
> ok kettenis@
>
dev3: iclass 3/1
ums0 at uhidev3: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (a592405c55eb1177.a) swap on sd0b dump on sd0b
radeondrm0: 1920x1080
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
>Synopsis: Recent TSC changes seem to result in frozen clock on Intel NUC
>Category: kernel
>Environment:
System : OpenBSD 6.2
Details : OpenBSD 6.2-current (GENERIC.MP) #148: Fri Oct 13 16:30:01
MDT 2017
dera...@amd64.openbsd.org:/usr/sr
ot;Intel Bluetooth" rev 2.00/0.01 addr 7
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (de339e3c63ba70d0.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x210, fw ver 16.242414.0, address 84:ef:18:5d:99:fe
ugold0: 2 sensors type si7
LD)) ||
> - (usec > (delay_usec + RECALIBRATE_DELAY_THRESHOLD)))
> + (usec > (delay_usec + RECALIBRATE_DELAY_THRESHOLD))) {
> + printf("usec %d tsc1 %llu tsc2 %llu count1 %llu "
> + "count2 %llu\n", use
er by the system (sysctl -n kern.timecounter.hardware) see
> what clock drift your system is going to develop in about a day
> (cat /var/db/ntpd.drift).
Updated to the latest snapshot, dmesg shows:
acpitimer0: recalibrated TSC frequency 1599946224 Hz
$ sysctl -n kern.timecounter.hardware
t
er by the system (sysctl -n kern.timecounter.hardware) see
> what clock drift your system is going to develop in about a day
> (cat /var/db/ntpd.drift).
Clock drift is at -16.829. Other amd64 boxes here are at -10.408 and -0.812.
Thanks,
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
> what clock drift your system is going to develop in about a day
>> > (cat /var/db/ntpd.drift).
>>
>> Clock drift is at -16.829. Other amd64 boxes here are at -10.408 and
>> -0.812.
>>
>
> That's acceptable if it's not much worse than it was before...
> Do you have the old number? You can switch to acpitimer and
> run it for a day with "kern.timecounter.hardware=acpitimer0".
After a day with acpitimer0, drift is -15.565. Not a very big difference.
Thanks,
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
>Synopsis: bioctl on apparently healthy array shows '0% done' as if
>rebuilding
>Category: amd64
>Environment:
System : OpenBSD 6.1
Details : OpenBSD 6.1-beta (GENERIC.MP) #37: Fri Mar 17 07:46:47
MDT 2017
dera...@amd64.openbsd.org:/usr
The following reply was made to PR system/6402; it has been noted by GNATS.
From: "Joe Gidi"
To: "Stuart Henderson"
Cc: "Joe Gidi" , gn...@openbsd.org
Subject: Re: system/6402: Realtek 8168 NIC not working on Asus M4A88TD-V
motherboard
Date: Thu, 17 Jun 2010 02
The following reply was made to PR system/6402; it has been noted by GNATS.
From: "Joe Gidi"
To: "Stuart Henderson"
Cc: gn...@openbsd.org
Subject: Re: system/6402: Realtek 8168 NIC not working on Asus M4A88TD-V
motherboard
Date: Thu, 17 Jun 2010 02:20:21 -0400
On Thu, J
This gets X working with the Radeon driver, though with a warning that
direct rendering is disabled and acceleration initialization failed.
Index: ati_pciids_gen.h
===
RCS file: /cvs/xenocara/driver/xf86-video-ati/src/ati_pciids_gen.h
The following reply was made to PR system/6405; it has been noted by GNATS.
From: "Joe Gidi"
To: gn...@cvs.openbsd.org, b...@cvs.openbsd.org
Cc:
Subject: Re: system/6405: X falls back to vesa,
doesn't use ati/radeon driver
Date: Fri, 18 Jun 2010 01:43:17 -0400
This gets X w
This diff gets the IGP recognized by the kernel, radeondrm and drm attach.
Haven't worked on X yet.
Index: pcidevs
===
RCS file: /cvs/src/sys/dev/pci/pcidevs,v
retrieving revision 1.1
diff -u -p -r1.1 pcidevs
--- pcidevs 2010/06/1
On Thu, June 17, 2010 11:48 pm, Joe Gidi wrote:
> This diff gets the IGP recognized by the kernel, radeondrm and drm attach.
> Haven't worked on X yet.
>
> Index: pcidevs
> ===
> RCS file: /cvs/src/sys/dev/pci
The following reply was made to PR system/6405; it has been noted by GNATS.
From: "Joe Gidi"
To: gn...@cvs.openbsd.org, b...@cvs.openbsd.org
Cc:
Subject: Re: system/6405: X falls back to vesa,
doesn't use ati/radeon driver
Date: Thu, 17 Jun 2010 23:48:48 -0400
This di
The following reply was made to PR system/6405; it has been noted by GNATS.
From: "Joe Gidi"
To: gn...@cvs.openbsd.org, b...@cvs.openbsd.org
Cc:
Subject: Re: system/6405: X falls back to vesa,
doesn't use ati/radeon driver
Date: Fri, 18 Jun 2010 00:36:08 -0400
On Thu, June
ystems on the LAN both with and without promiscuous mode.
Thank you all for working on this! If I can help in any way, please let me
know.
Thanks again,
--
Joe Gidi
j...@entropicblur.com
25 matches
Mail list logo