As I see, iwn driver in OpenBSD is very old and misses necessary iwn-6005 code
(init and advanced bt coexistence especially) which is present in iwn from
FreeBSD.
Sync of code with proper adaptation to OpenBSD is needed to get it working,
otherwise it gives kernel panic if we just add
It's me again.
I just want to say that now (after removing firmwares that are downloaded with
OpenBSD's fw_update
and copying new one from
http://intellinuxwireless.org/?n=downloadsf=ucodes_6000g2b to
/etc/firmware/iwn-6005)
dmesg does not show firmware error anymore!
But now it says
iwn0:
On 2012/08/27 22:18, X-user wrote:
It's me again.
I just want to say that now (after removing firmwares that are downloaded
with OpenBSD's fw_update
and copying new one from
http://intellinuxwireless.org/?n=downloadsf=ucodes_6000g2b to
/etc/firmware/iwn-6005)
dmesg does not show
No, I'm unable to do this. Still
iwn0: could not configure bluetooth coexistence
iwn0: could not configure device
and
iwn0: could not configure bluetooth coexistence
iwn0: could not configure device
iwn0: no link ..sleeping
when doing the same at boot.
I tried all versions of ucode but
by kernel compiled with modified if_iwn.c:
iwn0 at pci1 dev 0 function 0 Intel WiFi Link 130 rev 0x34: msi, MIMO 1T2R,
BGN, address XX:XX:XX:XX:XX:XX
(With original if_iwn.c it said device not configured)
ifconfig iwn0:
iwn0: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500
lladdr dc:a9:71
diff please
On Sat, Aug 25, 2012 at 3:29 AM, X-user x-user2...@yandex.ru wrote:
Add code to enable boot-time configuration of this device:
file: src/sys/dev/pci/if_iwn.c, from line: 93
[begin code]
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 },
{ PCI_VENDOR_INTEL,
93c93,95
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 }
---
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_130_1 },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_130_2 }
25.08.2012, 12:16, David Coppa dco...@gmail.com:
diff
From: X-user x-user2...@yandex.ru
Cc: bugs@openbsd.org bugs@openbsd.org
93c93,95
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 }
---
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_130_1 },
{ PCI_VENDOR_INTEL,
Add code to enable boot-time configuration of this device:
file: src/sys/dev/pci/if_iwn.c, from line: 93
[begin code]
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_100_2 },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_130_1 },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_WL_130_2 }
};
[end code]