Hi there, when using wpi, sometimes after waking up from APM suspend, the driver fails with a fatal firmware error while associating to my access point.
Every time this has happened, I suspended the machine in one location
(such as university) and woke it up in another (e.g. home), so the AP
"environment" changed considerably, with the AP the NIC was associated
to disappearing completely.
dmesg shows the following:
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000032000003560
time = 230497304
driver status:
tx ring 0: qid=0 cur=2 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=21 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=47
802.11 state 4
After bringing the interface down via ifconfig wpi0 down, resetting
all relevant IEEE802.11x settings (such as network ID and WPA key) to
currently relevant information (such as the new nwid I'm trying to
connect to) and bringing the interface up again, it associates in no
time and works flawlessly (that is, until the next time I suspend and it
errors out).
While this doesn't exactly affect performance, it's an annoyance
nonetheless.
I attached a complete dmesg, collected over the time of about 3 days.
The fatal firmware error occurs multiple times during the dmesg (I
suspended/woke my machine up about two or three times a day).
--
Gregor Best
OpenBSD 4.9-current (GENERIC.MP) #23: Wed Jul 13 09:45:29 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4284284928 (4085MB)
avail mem = 4156116992 (3963MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (70 entries)
bios0: vendor LENOVO version "7PETB8WW (2.18 )" date 07/02/2008
bios0: LENOVO 7650E8G
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4)
PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, 1995.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, 1995.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4572" serial 6831 type LION oem "SONY"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20549
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2,
address 00:1f:3c:9d:1b:c4
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: msi
pci3 at ppb2 bus 4
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2
(0xb002): apic 1 int 18, address 00:1c:25:93:ff:67
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci4 at ppb3 bus 21
cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb6: apic 1 int 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WX05> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MMCRE64G, VBM1> SCSI3 0/direct
fixed naa.50000f0056424431
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6349e25527df5700.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
softraid0: sd0 was not shutdown properly
softraid0: sd0 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
sd1: 38560MB, 512 bytes/sector, 78972272 sectors
softraid0: volume sd1 is roaming, it used to be sd0, updating metadata
softraid0: roaming device wd0j -> sd0j
umass0 at uhub1 port 1 configuration 1 interface 0 "Western Digital External
HDD" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <WD, 2500BEV External, 1.75> SCSI2 0/direct fixed
serial.10581010303933303939
sd2: 238475MB, 512 bytes/sector, 488397168 sectors
Ext2 fs: unsupported optional feature
Ext2 fs: unsupported optional feature
Ext2 fs: unsupported optional feature
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "Western Digital External
HDD" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <WD, 2500BEV External, 1.75> SCSI2 0/direct fixed
serial.10581010303933303939
sd2: 238475MB, 512 bytes/sector, 488397168 sectors
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000031C00003560
time = 2372626686
driver status:
tx ring 0: qid=0 cur=2 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=21 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=58
802.11 state 4
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
in6_purgeaddr: failed to remove a route to the p2p destination:
2001:4dd0:ff00:02e5::0002 on tun0, errno=3
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
umass0 at uhub1 port 2 configuration 1 interface 0 "iTE Tech USB Mass Storage
Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <IT1167B, USB Flash Disk, 0.00> SCSI2 0/direct
removable serial.048d1167000000000098
sd2: 15484MB, 512 bytes/sector, 31711232 sectors
sd2 detached
scsibus4 detached
umass0 detached
nd6_setmtu0: new link MTU on tun1 (500) is too small for IPv6
umass0 at uhub0 port 3 configuration 1 interface 0 "Western Digital External
HDD" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <WD, 2500BEV External, 1.75> SCSI2 0/direct fixed
serial.10581010303933303939
sd2: 238475MB, 512 bytes/sector, 488397168 sectors
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000031C00003560
time = 4204603966
driver status:
tx ring 0: qid=0 cur=2 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=21 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=53
802.11 state 4
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000031C00003560
time = 4239448809
driver status:
tx ring 0: qid=0 cur=4 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=55 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=38
802.11 state 4
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000031C00003560
time = 29472961
driver status:
tx ring 0: qid=0 cur=7 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=46 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=25
802.11 state 4
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
nd6_setmtu0: new link MTU on tun1 (500) is too small for IPv6
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
uhub7 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "Cypress Sem PS2/USB
Browser Combo Mouse" rev 1.00/0.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
umass0 at uhub1 port 1 configuration 1 interface 0 "Western Digital External
HDD" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <WD, 2500BEV External, 1.75> SCSI2 0/direct fixed
serial.10581010303933303939
sd2: 238475MB, 512 bytes/sector, 488397168 sectors
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
wsmouse1 detached
ums0 detached
uhidev0 detached
uhub7 detached
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
uhub7 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "Cypress Sem PS2/USB
Browser Combo Mouse" rev 1.00/0.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
wpi0: fatal firmware error
firmware error log (count=1):
error type = "UNKNOWN" (0x00000013)
error data = 0x00000070
branch link = 0x000008B600000274
interrupt link = 0x0000031C000081AA
time = 3491055998
driver status:
tx ring 0: qid=0 cur=176 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=22 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=48
802.11 state 4
umass0 at uhub1 port 1 configuration 1 interface 0 "Western Digital External
HDD" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <WD, 2500BEV External, 1.75> SCSI2 0/direct fixed
serial.10581010303933303939
sd2: 238475MB, 512 bytes/sector, 488397168 sectors
/dev/sd2i: file system not clean; please fsck(8)
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ehci_idone: ex=0xffff8000001b5800 is done!
wsmouse1 detached
ums0 detached
uhidev0 detached
uhub7 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
in6_purgeaddr: failed to remove a route to the p2p destination:
2001:4dd0:ff00:02e5::0002 on tun0, errno=3
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000032000003560
time = 398304921
driver status:
tx ring 0: qid=0 cur=2 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=21 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=45
802.11 state 4
in6_purgeaddr: failed to remove a route to the p2p destination:
2001:4dd0:ff00:02e5::0002 on tun0, errno=3
in6_purgeaddr: failed to remove a route to the p2p destination:
2001:4dd0:ff00:02e5::0002 on tun0, errno=3
uhub7 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "Cypress Sem PS2/USB
Browser Combo Mouse" rev 1.00/0.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhub7 detached
umass0 at uhub1 port 2 configuration 1 interface 0 "USBest Technology USB Mass
Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <Ut165, USB2FlashStorage, 0.00> SCSI2 0/direct
removable serial.13070165051038560050
sd2: 3853MB, 512 bytes/sector, 7892040 sectors
Ext2 fs: unsupported optional feature
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
uid 1000 on /tmp: file system full
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
umass0 at uhub1 port 2 configuration 1 interface 0 "USBest Technology USB Mass
Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <Ut165, USB2FlashStorage, 0.00> SCSI2 0/direct
removable serial.13070165051038560050
sd2: 3853MB, 512 bytes/sector, 7892040 sectors
sd2 detached
scsibus4 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
wpi0: fatal firmware error
firmware error log (count=1):
error type = "SYSASSERT" (0x00000005)
error data = 0x00000074
branch link = 0x000008B600000274
interrupt link = 0x0000032000003560
time = 230497304
driver status:
tx ring 0: qid=0 cur=2 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=21 queued=0
tx ring 5: qid=5 cur=0 queued=0
rx ring: cur=47
802.11 state 4
pgpUVUvxJEPey.pgp
Description: PGP signature
