Booting latest snapshot the system hangs at the following:
[drm] GuC: No firmware known for this platform!
[drm] HuC: No firmware known for this platform!
init: can't open /dev/console: Device not configured
Platform is Intel Gemini Lake (GLK) SoC.
Disabling inteldrm(4) allows normal boot
ng on gemini
lake even on linux. Is there anything else in dmesg when inteldrm
is not disabled?
> init: can't open /dev/console: Device not configured
>
>
> Platform is Intel Gemini Lake (GLK) SoC.
> Disabling inteldrm(4) allows normal boot shown below.
>
> dmesg:
>
On 05/01/2019 03:13 AM, Jonathan Gray wrote:
> On Wed, May 01, 2019 at 02:53:02AM -0400, James Hastings wrote:
>> Booting latest snapshot the system hangs at the following:
>>
>> [drm] GuC: No firmware known for this platform!
>> [drm] HuC: No firmware known for this platform!
>
> These messages a
> Date: Wed, 01 May 2019 04:57:29 -0400
> From: James Hastings
>
> On 05/01/2019 03:13 AM, Jonathan Gray wrote:
> > On Wed, May 01, 2019 at 02:53:02AM -0400, James Hastings wrote:
> >> Booting latest snapshot the system hangs at the following:
> >>
> >> [drm] GuC: No firmware known for this platf
(21.10.2013)
[drm] Driver supports precise vblank timestamp query.
[drm] Failed to find VBIOS tables (VBT)
[drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
init: can't open /dev/console: Device not configured
bin (v1.4)
> [drm] Cannot find any crtc or sizes
> [drm] Cannot find any crtc or sizes
> init: can't open /dev/console: Device not configured
So there are actually two problems here:
1. For some reason inteldrm(4) doesn't actually configure an output on
your hardware.
2. We don
nk timestamp query.
> > [drm] Failed to find VBIOS tables (VBT)
> > [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
> > [drm] Cannot find any crtc or sizes
> > [drm] Cannot find any crtc or sizes
> > init: can't open /dev/console: Device not co
caching Rev 2 (21.10.2013)
>>> [drm] Driver supports precise vblank timestamp query.
>>> [drm] Failed to find VBIOS tables (VBT)
>>> [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
>>> [drm] Cannot find any crtc or sizes
>>> [drm]
laptop (Lenovo X1 Carbon 6th) from it.
The install -- booted from a USB-attached CD-ROM, installed to a USB-3
external drive -- went fine.
When I tried to boot after installation, however, I hit a snag.
init(8) hung the boot. It kept printing:
init: can't open /dev/console: Device not conf
t after installation, however, I hit a snag.
> init(8) hung the boot. It kept printing:
>
> init: can't open /dev/console: Device not configured
> init: can't open /dev/console: Device not configured
> init: can't open /dev/console: Device not configured
>
> eve
t after installation, however, I hit a snag.
> init(8) hung the boot. It kept printing:
>
> init: can't open /dev/console: Device not configured
> init: can't open /dev/console: Device not configured
> init: can't open /dev/console: Device not configured
>
> eve
>Synopsis: Boot ends in continuous display of "init: can't open
/dev/console: Device not configured"
>Category: i386
>Environment:
System : OpenBSD 6.4
Details : OpenBSD 6.4 (GENERIC) #10: Tue Mar 26 18:09:00 CET
2019
r...@syspatch-64-i386.openb
12 matches
Mail list logo