The US is apparently one of the few countries still allowing lead solder. That said, it is lower temperature, easier to desolder and lower risk of damaging the board. As to the percentage, a small change will make a big difference. I think I agree with 60/40 but am not certain. Rosin core for
I second the flux! it will make your life easier working on PCBs with small
spaces, small components etc. Well, actually scratch that, it will make
your life easier, period. :)
On Thu, Jun 29, 2023 at 8:28 AM John Davis via BVARC
wrote:
> 60/40 Rosin core solder is the generally accepted
using sn-96 because that connector was going down hole and would see high temperatures and high Pressure. Chuck HaleKF5UXP From: John Davis via BVARCSent: Thursday, June 29, 2023 8:28 AMTo: BRAZOS VALLEY AMATEUR RADIO CLUBCc: John DavisSubject: Re: [BVARC] Soldering Rosin Core 60/40 Rosin core
60/40 Rosin core solder is the generally accepted solder. Some solders are
better than others which I assume has to do with the quality and quantity
of rosin. Do not use acid core solder. I like some solder radio shack
used to sell which also had some silver in it. You can also buy some flux
Sent from my T-Mobile 5G Device
>
>
>
> Original message
> From: mark roman via BVARC
> Date: 6/28/23 9:17 PM (GMT-06:00)
> To: BRAZOS VALLEY AMATEUR RADIO CLUB
> Cc: mark roman
> Subject: Re: [BVARC] Soldering Rosin Core
>
>
>
RADIO CLUB
Cc: mark roman
Subject: Re: [BVARC] Soldering Rosin Core
On Wed, Jun 28, 2023 at 9:14 PM John D via BVARC
mailto:bvarc@bvarc.org>> wrote:
Am expanding my ham experiences into the soldering world and am unsure what
type of solder to use? Any feedback would be greatly appre
That’s resin, spelled r-o-s-i-n. Rosin core actually.
Rw
From: BVARC On Behalf Of Suggs, Marvin (KTRK-TV) via
BVARC
Sent: Wednesday, June 28, 2023 21:42
To: BRAZOS VALLEY AMATEUR RADIO CLUB
Cc: Suggs, Marvin (KTRK-TV)
Subject: Re: [BVARC] Soldering Rosin Core
Resin core
Sent from my iPhone
Resin core
Sent from my iPhone
On Jun 28, 2023, at 9:17 PM, mark roman via BVARC wrote:
This Message is From an External Sender
Caution: Do not click links or open attachments unless you recognize the sender
and know the content is safe.
On Wed, Jun 28, 2023 at 9:14 PM John D via BVARC