It turns out that tcpborphserver had become defunct. After I restarted
it, I got an very encouraging response:
kuiper@roachnest:/opt/CASPER/tutorials_devel/workshop_2010/roach_tut3_wideband_spec$
sudo ./spectrometer.py roach1 -b r_spec_2048_r105_2010_Jul_26_1205.bof
Connecting to server roach1 o
On 03/02/2012 03:24 PM, David MacMahon wrote:
That's definitely not the most helpful error message.
I tried to find the code where it might be possible to detect whether
it's a missing file or file permissions problem but it seems that
katcp_wrapper.py FpgaClient() sends a request to the ROACH
On 03/03/2012 10:51 AM, Tom Kuiper wrote:
On 03/02/2012 05:43 PM, Tom Kuiper wrote:
On 03/02/2012 04:49 PM, Dan Werthimer wrote:
if you are using kat-ADC's, you'll need to change
the adc yellow block in the tutorial.
OK. In that case I think there's some text somewhere th
On 03/02/2012 05:43 PM, Tom Kuiper wrote:
On 03/02/2012 04:49 PM, Dan Werthimer wrote:
if you are using kat-ADC's, you'll need to change
the adc yellow block in the tutorial.
OK. In that case I think there's some text somewhere that I read that's
misleading. I'll try to find it aga
I think the bof file will still program even if it's compiled for the wrong
ADC. It just won't work beyond that (the FPGA will probably act like it
doesn't have an input clock).
Glenn
On Fri, Mar 2, 2012 at 5:43 PM, Tom Kuiper wrote:
> On 03/02/2012 04:49 PM, Dan Werthimer wrote:
>
>> if you are
hi tom,
i don't know of any tutorial that uses the KatADC,
they all use the iADC board.
but our colleagues in South Africa have developed
spectrometer and correlators that use the KatADC.
they might have some designs you could use to
test your KatADC.
best wishes,
dan
On Fri, Mar 2, 2012 at 5
On 03/02/2012 04:49 PM, Dan Werthimer wrote:
if you are using kat-ADC's, you'll need to change
the adc yellow block in the tutorial.
OK. In that case I think there's some text somewhere that I read that's
misleading. I'll try to find it again. Meanwhile, does anyone have
such a bof file? I
Hey Dan,
I'm following along closely here. Will we also need to manually set the
registers for the katadc or is that built into the .bof file upon
execution? I am reading the KatADC data sheet along with looking at the
corr.katadc functions. Is there any documentation about the katadc block
or
hi tom,
if you are using kat-ADC's, you'll need to change
the adc yellow block in the tutorial.
dan
On Fri, Mar 2, 2012 at 3:57 PM, Kuiper, Thomas (3266)
wrote:
> I think that's it! I after replacing the file system, I made the
> necessary changes from memory and general sys admin knowledge.
I think that's it! I after replacing the file system, I made the necessary
changes from memory and general sys admin knowledge. I think I forgot to move
the bof file. I'll let you know when I have a network connection again.
Thanks
Tom
Sent from my iPhone
On Mar 2, 2012, at 3:25 PM, "David
Hi, Tom,
That's definitely not the most helpful error message. Here are a couple of
things to check: Does the bof file have execute permissions? Is it in the
right directory?
Dave
On Mar 2, 2012, at 3:09 PM, Kuiper, Thomas (3266) wrote:
> After the challenges I shared with you and more that
After the challenges I shared with you and more that I didn't, I've reached a
reasonably satisfactory state. I say that because I think I'm finally at the
hardware/firmware level. The hardware: KatADC in Z-Doc 0 of a ROACH-1. 800
MHz at 0 dBm going in to clk. The firmware: from the tutorial.
12 matches
Mail list logo