hi Tom, I am not sure whether your problems been solved. If not,you can try to download some files in the website(https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b ) and add them to your /pcores as it said. If you can simulate the tut2.mdl well,It's probabley a problem of the version of your EDK. good luck! peter niu
At 2014-08-12 03:15:50, casper-requ...@lists.berkeley.edu wrote: >Send casper mailing list submissions to > casper@lists.berkeley.edu > >To subscribe or unsubscribe via the World Wide Web, visit > > https://calmail.berkeley.edu/manage/list/listinfo/casper@lists.berkeley.edu > >or, via email, send a message with subject or body 'help' to > casper-requ...@lists.berkeley.edu > >You can reach the person managing the list at > casper-ow...@lists.berkeley.edu > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of casper digest..." > > >Today's Topics: > > 1. broadcom BCM8747 (shu.lean) > 2. Problem running tutorial 2 (Geelen, T.F.G.) > 3. Re: Problem running tutorial 2 (Jack Hickish) > 4. Re: Problem running tutorial 2 (Geelen, T.F.G.) > 5. Re: Problem running tutorial 2 (Jack Hickish) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Mon, 11 Aug 2014 14:49:45 +0800 (CST) >From: "shu.lean" <shu.l...@163.com> >Subject: [casper] broadcom BCM8747 >To: casper <casper@lists.berkeley.edu> >Message-ID: <ecd69b7.70c1.147c3d46fde.coremail.shu.l...@163.com> >Content-Type: text/plain; charset="gbk" > >Hi all, > > >Do anyone here have any experiences in Broadcom's PHY chip BCM8747? > > >I have a Xilinx Virtex 6 FPGA board and a 10 gigabit ethernet expansion board >that has 4 PHY chips (BCM8747). There are ZD connectors between the two >boards. And I came across some problems. I am sure that the supply voltage >and the reference clock (156.25 MHz) of the PHY are OK. And I also have made a >testing of eye diagram for the trasmitter and the reciever of XAUI. Both of >the eye's width and height meet the requirements of BCM8747 data sheet. But it >has a problem in sychoronization and alignment of the four lanes. The four >lanes(one port) can't be sychoronized and aligned even I configured the PHY to >the independent lane loopback operation mode(It connects the XAUI deserializer >output directly to the XAUI serializer input). I also tried to configure the >PHY to be 1 Gbe bypass mode and made a loopback. It was not linked up, either. > > >Has anyone met problems like these yet? > > >Thank you very much! > > >Best wishes, > > >Lin >-------------- next part -------------- >An HTML attachment scrubbed and removed. >HTML attachments are only available in MIME digests. > >------------------------------ > >Message: 2 >Date: Mon, 11 Aug 2014 17:57:07 +0000 >From: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl> >Subject: [casper] Problem running tutorial 2 >To: CASPER Mailing List <casper@lists.berkeley.edu> >Message-ID: > <05475c4daa397d479a606082fdf4731806911...@xserver23a.campus.tue.nl> >Content-Type: text/plain; charset="us-ascii" > >Hello, > >I am trying to work out how the GBe connection works. I have downloaded >tutorial 2 from the casper website and replaced all the erroneous software >blocks. >I am running Matlab R2012b and Xilinx 14.5. > >As soon as I start to compile and he revves the design up to version 14.5 I >get a couple of errors immediatly after. Can someone give me a tip as to how >to solve this error? > >Kind regards, > >Tom > >Moving all revup related files to 'revup' folder... > >Format revision of project to EDK 14.5 completed >ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not > found in the MPD - > /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs > line > 417 >ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not > found in the MPD - > /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs > line > 485 >WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_lsb - > Superseded core for architecture 'virtex5sx' - > /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs > line > 751 >WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_msb - > Superseded core for architecture 'virtex5sx' - > /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs > line > 781 >WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_oob - > Superseded core for architecture 'virtex5sx' - > /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs > line > 811 >ERROR:EDK - while loading XMP file > >XPS% Evaluating file run_xps.tcl >ERROR:EDK - Load a MHS or XMP file first >Error using gen_xps_files (line 638) >XPS failed. > > >------------------------------ > >Message: 3 >Date: Mon, 11 Aug 2014 11:13:48 -0700 >From: Jack Hickish <jackhick...@gmail.com> >Subject: Re: [casper] Problem running tutorial 2 >To: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl> >Cc: CASPER Mailing List <casper@lists.berkeley.edu> >Message-ID: > <cag1gksknqrlnfx9sfhuy9v56qk75gsjxh6xrbzzxeegwe_g...@mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >Hi Tom, > >This is a library version issue. I've been useless and haven't yet >pushed the up-to-date library to the casper-astro repository. I shall >do this now (though it might take a few minutes for me to download and >push the correct stuff to github). > >Jack > >On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote: >> Hello, >> >> I am trying to work out how the GBe connection works. I have downloaded >> tutorial 2 from the casper website and replaced all the erroneous software >> blocks. >> I am running Matlab R2012b and Xilinx 14.5. >> >> As soon as I start to compile and he revves the design up to version 14.5 I >> get a couple of errors immediatly after. Can someone give me a tip as to how >> to solve this error? >> >> Kind regards, >> >> Tom >> >> Moving all revup related files to 'revup' folder... >> >> Format revision of project to EDK 14.5 completed >> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not >> found in the MPD - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 417 >> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not >> found in the MPD - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 485 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_lsb - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 751 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_msb - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 781 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_oob - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 811 >> ERROR:EDK - while loading XMP file >> >> XPS% Evaluating file run_xps.tcl >> ERROR:EDK - Load a MHS or XMP file first >> Error using gen_xps_files (line 638) >> XPS failed. > > > >------------------------------ > >Message: 4 >Date: Mon, 11 Aug 2014 18:20:49 +0000 >From: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl> >Subject: Re: [casper] Problem running tutorial 2 >To: Jack Hickish <jackhick...@gmail.com> >Cc: CASPER Mailing List <casper@lists.berkeley.edu> >Message-ID: <xpwh6hl5kksa7u7mh5hcdhpu.1407781247...@email.android.com> >Content-Type: text/plain; charset="us-ascii" > >Hi Jack, > >Thank you, I'll be waiting for the new push on the repository. Thanks already! > >Groetjes, > >Tom Geelen > >Jack Hickish <jackhick...@gmail.com> wrote: > > >Hi Tom, > >This is a library version issue. I've been useless and haven't yet >pushed the up-to-date library to the casper-astro repository. I shall >do this now (though it might take a few minutes for me to download and >push the correct stuff to github). > >Jack > >On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote: >> Hello, >> >> I am trying to work out how the GBe connection works. I have downloaded >> tutorial 2 from the casper website and replaced all the erroneous software >> blocks. >> I am running Matlab R2012b and Xilinx 14.5. >> >> As soon as I start to compile and he revves the design up to version 14.5 I >> get a couple of errors immediatly after. Can someone give me a tip as to how >> to solve this error? >> >> Kind regards, >> >> Tom >> >> Moving all revup related files to 'revup' folder... >> >> Format revision of project to EDK 14.5 completed >> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not >> found in the MPD - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 417 >> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not >> found in the MPD - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 485 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_lsb - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 751 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_msb - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 781 >> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >> tut2_snap_gbe0_tx_bram_oob - >> Superseded core for architecture 'virtex5sx' - >> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >> line >> 811 >> ERROR:EDK - while loading XMP file >> >> XPS% Evaluating file run_xps.tcl >> ERROR:EDK - Load a MHS or XMP file first >> Error using gen_xps_files (line 638) >> XPS failed. > > > >------------------------------ > >Message: 5 >Date: Mon, 11 Aug 2014 11:51:23 -0700 >From: Jack Hickish <jackhick...@gmail.com> >Subject: Re: [casper] Problem running tutorial 2 >To: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl> >Cc: CASPER Mailing List <casper@lists.berkeley.edu> >Message-ID: > <CAG1GKS=pxguhnpuc_l7ptrcqbosvhsqgjn9orbxwfv7xdc5...@mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >Hi Tom, > >This is done. If you pull from >https://github.com/casper-astro/mlib_devel.git you should be good to >go with the tutorials (this is the branch we used at the workshop). > >Note that if you're doing a fresh clone you'll have to add back in the >deprecated pcores (see >https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b#Tweaks_to_be_able_to_compile) > >The startup proceedure has also changed slightly. After cloning the >repository, rather than editing startsg (which is tracked in git), you >should create a separate file named startsg.local, which contains your >location-specific matlab/xilinx install paths. A sample is given on >the wiki page I linked, but basically you just need a file with three >lines (eg): > >export MATLAB_PATH=/opt/MATLAB/R2012b >export XILINX_PATH=/opt/Xilinx/14.7/ISE_DS >export XILINX_PLATFORM=lin64 > >appropriately set for your install. > >Let me know if you have any problems, > >Jack > > > > >On 11 August 2014 11:20, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote: >> Hi Jack, >> >> Thank you, I'll be waiting for the new push on the repository. Thanks >> already! >> >> Groetjes, >> >> Tom Geelen >> >> Jack Hickish <jackhick...@gmail.com> wrote: >> >> >> Hi Tom, >> >> This is a library version issue. I've been useless and haven't yet >> pushed the up-to-date library to the casper-astro repository. I shall >> do this now (though it might take a few minutes for me to download and >> push the correct stuff to github). >> >> Jack >> >> On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote: >>> Hello, >>> >>> I am trying to work out how the GBe connection works. I have downloaded >>> tutorial 2 from the casper website and replaced all the erroneous software >>> blocks. >>> I am running Matlab R2012b and Xilinx 14.5. >>> >>> As soon as I start to compile and he revves the design up to version 14.5 I >>> get a couple of errors immediatly after. Can someone give me a tip as to >>> how to solve this error? >>> >>> Kind regards, >>> >>> Tom >>> >>> Moving all revup related files to 'revup' folder... >>> >>> Format revision of project to EDK 14.5 completed >>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not >>> found in the MPD - >>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >>> line >>> 417 >>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not >>> found in the MPD - >>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >>> line >>> 485 >>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >>> tut2_snap_gbe0_tx_bram_lsb - >>> Superseded core for architecture 'virtex5sx' - >>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >>> line >>> 751 >>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >>> tut2_snap_gbe0_tx_bram_msb - >>> Superseded core for architecture 'virtex5sx' - >>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >>> line >>> 781 >>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: >>> tut2_snap_gbe0_tx_bram_oob - >>> Superseded core for architecture 'virtex5sx' - >>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs >>> line >>> 811 >>> ERROR:EDK - while loading XMP file >>> >>> XPS% Evaluating file run_xps.tcl >>> ERROR:EDK - Load a MHS or XMP file first >>> Error using gen_xps_files (line 638) >>> XPS failed. > > > >End of casper Digest, Vol 81, Issue 7 >*************************************