Hi,
For Gatekeeper CAC, update the region as g711 and for Gatekeeper device pool
update the region [g711] and left none for location.
Gatekeeper bandwidth is controlled via bandwidth command
as "zone bw ipexpert 144" this example could support up to one G.711 and one
g.729 calls.
I just tried something else, its only on a
dspfarm profile X conference
transcode profiles seem to be alright.
On Dec 11, 2007 9:57 PM, Chad Stachowicz <[EMAIL PROTECTED]> wrote:
> I have my resources configured identically on a CME and branch router (
> except of course SCCP local and ip addr
I have my resources configured identically on a CME and branch router (
except of course SCCP local and ip address's) on my branch router when I
type Maximum Session <0-0> I dont have any available sessions? I have never
seen this before where nothing is available to me...
Chad
It'll run for 20 minutes and then shut itself off. It usually times itself
to shut off right in the middle of a dialplan test, which is why I finally
bought a copy.
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Voice Noob
Sent: Tuesday, December 11, 2007 9:23 PM
So is the 20 minute limit that the phone only works for 20 min's and then
you can't use it anymore or does it just kill the app and you start it back
up?
On Dec 11, 2007 11:52 AM, Mark Snow <[EMAIL PROTECTED]> wrote:
> Mike,
>
> As Anil mentioned - you can download a demo version of IPBlue's
> pr
Mark/All,
Networker's presentation's are how I got onto verifiying this in the first
place! I was going over the CCIE Voice PPT and saw the 95% of CIR, and
decided its time to verify :) One more question, in the actual lab, I know
they have disabled the search function of univercd? But how ab
Thanks Mark...
- Original Message
From: Mark Snow <[EMAIL PROTECTED]>
To: jatinder khalsa <[EMAIL PROTECTED]>
Cc: ccie_voice@onlinestudylist.com
Sent: Tuesday, December 11, 2007 10:30:34 PM
Subject: Re: Can Someone help me for TCL Script issue here
JP,
That is normal to see that - it
Chad - Welcome to the group!
That specific value had been published in an older SRND. You are
correct that you should go with whatever the current SRND (ver 3.3)
says - since you will see it in the real lab.
That being said - you may also like to know and want to keep in mind,
that Ben Ng (
Dear All,
Can you please help with TCL scripting. i am configuring on my br1 gateway
under application. I am receiving the following error???
BR1(config)#application
BR1(config-app)#ser
BR1(config-app)#service aa
BR1(config-app-param)#par
BR1(config-app-param)#params
BR1(config-app-param)#param
JP,
That is normal to see that - it is not an error - mainly telling you
that you haven't configured that parameter before - and that it is now
registered under the 'namespace' or instance of the TCL script that as
far as the router is concerned is now known as "aa".
HTH,
Mark Snow
CCIE
All,
I'm new to the list, this is my first post so I would like to say hello.
Anyways I have a question regarding the Proctor guide Vs SRND Differences
I'm seeing and what to go with.
>From what I have heard its always best to use what you can find right out of
the SRND?
http://www.cisco.c
If you were to call from CCM over to CME and didn't have the MTP
checked - then transferred the call or various other things known as
'supplementary services' - they would most probably fail.
The 'enable outbound faststart' is due to the fact that the IPIPGW in
IOS 12.4 mainline only suppor
Thanks for posting the config JP.
Also for this config and many other things relating to the hardware in
the/our labs - please see all of the posts at this forum:
http://tinyurl.com/yu2kjh
http://tinyurl.com/36d5qo
Cheers,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical
Mike,
As Anil mentioned - you can download a demo version of IPBlue's
product called VTGO linked through our ProctorLabs.com website or
linked here as well:
http://ipblue.com/download.asp?software=vtgo_lite
However, due to the 20 minute running limitation that Anil mentioned
that the demo
What debugs have you run so far and what do you think you should be
looking for?
Please email us back with the content from the multiple debugs you
should be running while placing said troubling call.
*Hints:
-Call-Forward Pattern and Transfer Patterns need to be set under the
'telephony-s
All studying for Voice:
Be sure to check out this article where we articulate some of the
latest (major) enhancements to our PL Voice vRack hardware including:
- Support for you to control your own PSTN Phone
- Support for you to use Hardware IP Phones for studying
- All new powerful servers
Also, to run this module. You may need to upgrade the power supply to an
AC-IP power supply so that it has enough power for PoE.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tyson Scott
Sent: Tuesday, December 11, 2007 9:31 AM
To: 'Matthew Saskin'; 'Da
Actually the ES is a full switch running 3750 code, much more expensive.
The part numbers are NME-16ES-1G-P
And NM-16ESW-PWR
You want the last one.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matthew Saskin
Sent: Monday, December 10, 2007 9:18 AM
To:
18 matches
Mail list logo