Re: [OSL | CCIE_Voice] IPCC Agent login on UniverCD

Thank dude, I'm getting down to the nitty gritty here and trying to tie up the silly loose ends before my first attempt! Chad On 1/30/08, boonchin .ng <[EMAIL PROTECTED]> wrote: > > Well, why not use the Cisco CAD Installation GuideCAD 6.4 for Unified > CM

Re: [OSL | CCIE_Voice] CUE v2.2 initialization wizard problem...

Hello Alex. You have a CCM license file on unity express. You need to change the license to CCME for unity express. Once you change that it will give you the right option to connect. Thanks & Regards, Anand Kadam Solution Architect | Convergence Communication | Professional Service Di

Re: [OSL | CCIE_Voice] IPCC Agent login on UniverCD

Well, why not use the Cisco CAD Installation GuideCAD 6.4 for Unified CMunder Cisco Customer Response Solutions 5.0(x) in UniverCD? On Jan 31, 2008 1:40 PM, Chad Stachowicz <[EMAIL PROTECTED]> wrote

[OSL | CCIE_Voice] IPCC Agent login on UniverCD

it looks like the IPCC Express SRND is one of he links broken on UniverCD... does anyone know a good place to locate the ip phone service URL for CCM, other then in UniversCD? Chad

[OSL | CCIE_Voice] Gateway Location

Should we ever set a location on the gateway? I figured we should, however it seems to break most of my labs :) Thanks, Chad

Re: [OSL | CCIE_Voice] CUE v2.2 initialization wizard problem...

you have the wrong CUE license key, it has to be CCME not CCM. Check show software version and show software license Download the right license key. Thanks Ovais. On 1/30/08, Alex Hannah <[EMAIL PROTECTED]> wrote: > > Hello, > > > > *What determines if the CUE module during the initializ

[OSL | CCIE_Voice] CUE v2.2 initialization wizard problem...

Hello, ***What determines if the CUE module during the initialization wizard prompts you for connection info to CM versus CME? I am having a weird issue with CUE. I configured CME properly to connect to CUE ( see config ), I can ping the CUE Service Engine on the router, I can hit the webp

Re: [OSL | CCIE_Voice] SRST VM-integration workaround

Hi, I've found the issue I previously had SRST voicemail integration working on IOS ver 12.4(12) using the "ie redirecting-number" command on the PRI D-Channel interface. It seems that if this command is left there then it interferes with the workaround used for earlier IOS versions. I r

[OSL | CCIE_Voice] SRST VM-integration workaround

Hi, I'm having trouble getting the SRST voicemail integration workaround working... essentially it seems as though the called number is not getting presented to Unity correctly... but I can't work out why! I can call directly into voicemail (2900) from Site1 Ph1 (3001) in SRST mode and the

Re: [OSL | CCIE_Voice] Clear IP Setting from a 6608

That will get resolved very shortly- we've gotten a little strict with what commands users can type in (far to many "reloads" etc...) I've put those commands in for you on this occasion and it looks like those ports are picking up the right IP address now. TFTP is activated as you say- all you

Re: [OSL | CCIE_Voice] Clear IP Setting from a 6608

TFTP on call manager is active. VOICE-6500-1> (enable) set vlan 1 7/5 Command authorization failed. VOICE-6500-1> (enable) set vlan 1 7/6 Command authorization failed. VOICE-6500-1> (enable) Thanks, Chad On 1/30/08, Vik Malhi <[EMAIL PROTECTED]> wrote: > > A trick with the 6608 is to put the

Re: [OSL | CCIE_Voice] Clear IP Setting from a 6608

A trick with the 6608 is to put the port in the default vlan and then back to the "real vlan"...You also don't have the TFTP service activated so it will not register. set vlan 1 mod/port set vlan 400 mod/port Vik Malhi CCIE Voice Instructor / Developer - IPexpert, Inc. CCIE Voice #13890

Re: [OSL | CCIE_Voice] QoS

You need to enable FRTS on the interface before you configure MLP LFI. Depending on the router / IOS version, class-based shaping with MLP LFI is supported but obviously not here. Vik Malhi CCIE Voice Instructor / Developer - IPexpert, Inc. CCIE Voice #13890 CCSI #31584 URL: http://www.IPexper

Re: [OSL | CCIE_Voice] Default CUE Password

I'm faily certain that you cannot change the CUE enable password. I found this in a doc on CCO today. The password is always blank. You depend on the router for authentication. -Message sent from my wireless device. -Original Message- From: "ovais Iqbal" <[EMAIL PROTECTED]> To: "senth

Re: [OSL | CCIE_Voice] Clear IP Setting from a 6608

what do you want to do here? do you want to disable DHCP on these 6608 voice ports? On 1/30/08, Chad Stachowicz <[EMAIL PROTECTED]> wrote: > > Does anyone know how to do this? Please see the wierdness below. > > > > > VOICE-6500-1> (enable) sh port 7/4 > * = Configured MAC Address > > # = 802.1X

[OSL | CCIE_Voice] Clear IP Setting from a 6608

Does anyone know how to do this? Please see the wierdness below. VOICE-6500-1> (enable) sh port 7/4 * = Configured MAC Address # = 802.1X Authenticated Port Name. Port Name Status Vlan Duplex Speed Type - -- -- --

Re: [OSL | CCIE_Voice] Access Callmanager Corporate directory

Just add the phone in with no DN, just need the MAC address on the CCM From: Tade [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 30, 2008 6:33 AM To: Burkett, Michael Cc: Balamurugan Singaram; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Access Callmanager Corporate direc

Re: [OSL | CCIE_Voice] Default CUE Password

yes you can not do the factory reset if you are not in enable mode, you may need to do a password recovery if supported. I see a procedure to GUI password recovery but not for CLI, there must be one. are u able to get to the CUE user prompt? Is this is a new system install or some else touched it

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

Normally, when you dial a pattern, and it results in a fast busy signal, then it usually means there is no matching pattern to resolve the dialing numbers. However, if you dial the first digit of a pattern, and it results in a fast busy signal, then it usually means that you don't have permiss

Re: [OSL | CCIE_Voice] E1R2 country specific examples on univercd?

Hey Mike, I will look for one. Country-Code use defaults changes a number of things - like companding type (uLaw vs aLaw) and ringback tones among others - I would only use it if told to. Mark Snow CCIE #14073 (Voice, Security) CCSI #31583 Senior Technical Instructor - IPexpert, Inc. A Cisc

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

try what I have suggested if you have time, just try the basic config and see where are you breaking out. On 1/30/08, Priyank Kiran <[EMAIL PROTECTED]> wrote: > > Excatly, I have never seen this before myself. Must have done at least 20 > CMEs before. Idid scrap the entire config & re-did it, but

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

Excatly, I have never seen this before myself. Must have done at least 20 CMEs before. Idid scrap the entire config & re-did it, but not through the "telephony-service setup". I was wondering if there were any "debug commands" that could help this. I am using CME version 4.1 Thanks! On Jan 30

Re: [OSL | CCIE_Voice] Default CUE Password

i was about to type that ..then realized shouldn't one be logged in the CUE in enable mode to go offline? -senthil On Jan 30, 2008 3:41 PM, jatinder khalsa <[EMAIL PROTECTED]> wrote: > Do the offline and Factory Default setting > > - Original Message > From: Chad Stachowicz <[EMAIL P

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

this is strange, what version of CME is this one? may be if time does not permit to troubleshoot it further then you could take a backup of your config and do the following: 1- backup your runn-config 2- do *no telephoney-service* 3- Reload the router 4- do Telephoney-service setup 5- put the basi

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

Ovais: Thanks for the repsonse. Did all whatever you mentioned before. In fact I also tries changing the secondary-dialtone from 9 to other nos. like 7 or 8, same result (fast busy tone). It is something like it does not recognize that pattern. for exapmle I do not have any patterns that begin wi

Re: [OSL | CCIE_Voice] Default CUE Password

Do the offline and Factory Default setting - Original Message From: Chad Stachowicz <[EMAIL PROTECTED]> To: Mark Snow <[EMAIL PROTECTED]> Cc: CCIE Maillist Sent: Wednesday, January 30, 2008 5:09:23 PM Subject: Re: [OSL | CCIE_Voice] Default CUE Password Naturally I tried everything, b

Re: [OSL | CCIE_Voice] Secondary Dialtone - CME

what do you hear when you press 9 if you leave that command in? and what if you remove this command and check if there is any difference? other wise the best thing with CME would be to do two things as follows: - reset the phones or - reload the router. Thanks Ovais. On 1/30/08, Priyank Kiran

[OSL | CCIE_Voice] Secondary Dialtone - CME

Hi, What could be the reason for the secondary-dialtone not working on a CME router ? I have the command "secondary-dialtone 9" under the telephony-service. Thank you ! ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.240.1 192.168.240.50 ip dhcp excluded-address 192.168.240.

Re: [OSL | CCIE_Voice] Default CUE Password

Naturally I tried everything, but nothing :) Thanks all.. On Jan 29, 2008 9:13 PM, Mark Snow <[EMAIL PROTECTED]> wrote: > Default password is blank -however sometimes you are asked for a > username and password - which is more often than not a result of AAA > misconfigured on the CME router. If

Re: [OSL | CCIE_Voice] IPCC Question

awesome thanks a bunch guys! On 1/30/08, Devildoc <[EMAIL PROTECTED]> wrote: > > That's right! The first name, last name, username and password should be > set to "telecaster". > > JD > > > -- > Date: Wed, 30 Jan 2008 11:28:30 +0800 > From: [EMAIL PROTECTED] > To: [EM

Re: [OSL | CCIE_Voice] I think it's simple one - NM-HDV vs NM-HDV-2

You can also do sh inventory to verify this. On 1/30/08, Toltzien, Matt <[EMAIL PROTECTED]> wrote: > > Run a show diag. > > > -Original Message- > From: [EMAIL PROTECTED] on behalf of anil batra > Sent: Wed 1/30/2008 12:46 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voic

Re: [OSL | CCIE_Voice] IPCC Question

That's right! The first name, last name, username and password should be set to "telecaster". JD Date: Wed, 30 Jan 2008 11:28:30 +0800From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] IPCC QuestionI think password should be telecaster On Jan 30, 2008 11: