Re: [OSL | CCIE_Voice] pstn calls during AAR

If a call destined for a San Jose phone comes into the San Jose gateway, why should the WAN being congested be a concern (for this particular call). So in other words, Locations CAC bandwidth deductions do not occur for calls within a Location (San Jose in the example). Locations CAC comes in

Re: [OSL | CCIE_Voice] PRI into 6500 in real world

Where does one get the XXTracy tool? On Mon, Jun 9, 2008 at 3:20 PM, Rick Grimes <[EMAIL PROTECTED]> wrote: > You can also just browse to the ip address of the registered gateway and > look at the port statistics. Make a call inbound from the pstn and make an > outbound call. The statistics with i

[OSL | CCIE_Voice] pstn calls during AAR

RS1 dn-5001=dn-2001--HQ. When hq to siteb wan link gets congested, no bandwidth for a call - what happens if PSTN callers call during wan congestion to RS1 5001? - should PSTN callers be able to ring 5001 OR - should PSTN callers go to the voicemail of 5001? Assuming, 5001 and 20

Re: [OSL | CCIE_Voice] calling out to FXS port via SIP trunk -nocaller-id?

I persevered a while back and never got Calling Name to function from CCM to CME via the SIP trunk. So at the moment it appears that "this is the way it works" unless somebody has any further insight. BTW- I expect the CME phone to function in the same way as an FXS portsee below for the reas

Re: [OSL | CCIE_Voice] VOL3 Lab 7 Task 30: VPIM

You need to fwd messages between Unity and CUE. The steps to test this are detailed in the Proctor Guide document. Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Joi

Re: [OSL | CCIE_Voice] gatekeeper routing

It has to be in zone A. Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities

Re: [OSL | CCIE_Voice] Proctor Labs Easy VPN setup

Mark, I attempted to get connected tonight to proctor labs via easyvpn config but wasn't able too. I worked with tech support but was not able to resolve. I sent in email to [EMAIL PROTECTED] with show tech output. We verified that my setup was correct from a physical and I had copied/pasted

Re: [OSL | CCIE_Voice] Proctor Labs Easy VPN setup

Whatever IP Address your 2651xm fa0/0 currently has is probably fine. (what is it?) Your 2651xm fa0/0 port will be your EasyVPN Outside IP Address. -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto:

[OSL | CCIE_Voice] gatekeeper routing

hi all, If the gatekeeper finds the destination zone for a call is in zone A, does that mean that - using default tech-prefix routing - it has to find a GW in the same destination zone that's registered with the default tech-prefix? Or can it be any gateway, even in another zone, say zone B, as lon

Re: [OSL | CCIE_Voice] calling out to FXS port via SIP trunk - nocaller-id?

Hey, Onur, I will try it tomorrow when I go in to the office and post results here. Jane From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Onur Tufekci Sent: Tuesday, June 10, 2008 4:08 PM To: OSL CCIE Voice Lab Exam Cc: Subject: Re: [OSL

Re: [OSL | CCIE_Voice] calling out to FXS port via SIP trunk - no caller-id?

Can you please try: Sip-ua Remote-party-id I am curious if it works. On Jun 9, 2008, at 11:11 PM, "Jane Ryer (jryer)" <[EMAIL PROTECTED]> wrote: I set up a SIP trunk from Call Manager to a router with an FXS port. When I call from the analog phone attached to the FXS port to an IP Blue

Re: [OSL | CCIE_Voice] Cisco CUE Module

Is this on a Proctor Labs rack, or your own lab? You need an "ip http server" command in the CME router config. It is already there in all of the Proctor Lab routers, but if you are setting up your own lab, then you may need to enter it. Jane From: [EM

[OSL | CCIE_Voice] Cisco CUE Module

Hi Guys Struggling on something, the Cue Module. I setup the CME with all the setting required including the "web admin system name admin password cisco" and have reset the cisco CUE to factory defaults setting the new account details to admin and cisco in CUE. When I get to the first setup page o

[OSL | CCIE_Voice] VOL3 Lab 7 Task 30: VPIM

Hi, For the IPEXPERT newly released VOL3 workboook on Lab7 Task 30. We are required to create VPIM between CUE and Unity. I am just wondering, after configured the VPIM on CUE and Unity, how can I actually test the configuration? Thanks.

Re: [OSL | CCIE_Voice] Gatekeeper 1st call g711 2nd call g729 - works but not as expected

You might want to uncheck the Media Transcoder required check box and try that way. What I found out that if you do not have hardware transcoder in your MRGL then the calls come in from CME over Gatekeeper to IPCC do not work. On Fri, May 30, 2008 at 10:50 AM, Rimon Vallavanatt Jr. <[EMAIL PROTECT

[OSL | CCIE_Voice] Problem Configuring IPIPGW

Hi, I am having problem configuring IPIPGW: *HQ phone (SCCP, connected to CM) *BR2 phone (SCCP, connected to CME) HQ phone can call BR2 phone. BR2 phone cannot call HQ phone.. Two Trunks are configured on CM are pointing to HQ router[IPIPGW]: *ICT trunk (H.323 non gatekeeper controlled) *SIP

Re: [OSL | CCIE_Voice] DSPs in a 1760

You could test the DSPs as transcoders. Set up an IPIPGW with g711 to g729 and see if it works. I am very curious myself as I have two 1760s in my lab that I wouldn't mind adding additional DSPs. I think you can get a better deal on the older PVDM-X modules. Thanks. On 6/7/08, mike deal <[EMA

Re: [OSL | CCIE_Voice] DSPs in a 1760

First send didn't seem to go through..resending. On Sat, Jun 7, 2008 at 4:57 PM, mike deal <[EMAIL PROTECTED]> wrote: > Hi all, > > I'm in the process of building my budget lab, and I've come across plenty > of 1760s with PVDM-X modules, rather than the PVDM-256K-X modules. > > Cisco documentatio

Re: [OSL | CCIE_Voice] POTS Dial-peer

119002001 On Jun 10, 2008, at 7:13 AM, Balamurugan Singaram <[EMAIL PROTECTED]> wrote: Hi, If I dial 9002001, then the outgoing number will be 900112001 or 112001 ? dial-peer voice 10 pots destination-pattern 900T forward digit all prefix 11 Thanks, Bala. dschulz <[EMAIL PROTECTED]>

Re: [OSL | CCIE_Voice] Lab exam CCM Features and services PDF

You can access that guide directly from the HELP of the Callmanager -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Stephen Collinson Enviado el: 10 June 2008 07:05 Para: OSL CCIE Voice Lab Exam Asunto: [OSL | CCIE_Voice] Lab exam CCM Features and services P

Re: [OSL | CCIE_Voice] POTS Dial-peer

I believe you would be sending 119002001 Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis, MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and

Re: [OSL | CCIE_Voice] POTS Dial-peer

Hi, If I dial 9002001, then the outgoing number will be 900112001 or 112001 ? dial-peer voice 10 pots destination-pattern 900T forward digit all prefix 11 Thanks, Bala. dschulz <[EMAIL PROTECTED]> wrote: To get around this, you can set the how many digits to forward by us

Re: [OSL | CCIE_Voice] Per flow Policing

Thank you Mark, Finally started to make sense. I am curious if it is worth spending the time on it in the exam. Cheers, Onur. On Mon, Jun 9, 2008 at 10:41 PM, Turpin, Mark <[EMAIL PROTECTED]> wrote: > Onur, > > > > Yes, but use separate aggregate ACL's per port. This limits the overall > am

[OSL | CCIE_Voice] Fax on/off ramp with FXS into Unity

G'Day, Scenario - Microsoft Fax server, into and FXS port, via various different modems. Goal faxing into unity. Not the easiest set of items to troubleshoot. Going through tcl on-ramp script it looks like it should function, but should and working are oceans apart in this case. Out

[OSL | CCIE_Voice] Lab exam CCM Features and services PDF

Hi, Would appreciate if anyone could let me know if we get the following guide in the exam. Cisco CallManager Features and Services Guide Cheers S