Ahhh It was DID on the PSTN-WAN router. Duhhh!
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
From: abdulminim rizk [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2008 3:17 PM
To:
Good Deal, Yea CME 4.1 has a lot of cool new stuff in it, I was just
thinking LAB type things for CME 3.3
Kevin
Kevin Porter
Systems Engineer L4
Netelligent Corporation
400 South Woods Mill Drive, Suite 105
St. Louis, MO 63017
Office: (314) 392-6921
Cell: (314) 852-1252
Fax: (314) 392-9760
Try to check your Dial-peer configuration and make sure u have DID option with
Port
Abdelmoniem rezk
CCIE#18832 VOICe
Egypt , cairo
Date: Thu, 26 Jun 2008 12:54:04 -0700From: [EMAIL PROTECTED]: [EMAIL
PROTECTED]: [OSL | CCIE_Voice] ios trunk-to-trunk hairpin
I’m getting secondary dial-tone
Hi kevin
CME Max conference is limited per Platform [ as you mentioned 2811, 2821 , 2851
is 16 max 3 way conference ] 3800 is 24 and so forth ,
while starting from CME 4.1 as i mentioned , CFB HW beside MTP/Xcoder resource
is introduced into the game as part of enhanced multiparty conference [
on CME version 3.3 u cannot register CFB resource on the Telephony service SCCP
engine , only MTP /Xcoder resources is used, Software based Conference is
embedded inside the CME , however starting from CME version 4.1 the Adhoc/Meet
me conference enabled [ enhancement to the multiparty conferen
If you are trying to use the DSPFarm to support conferencing, it is not
needed. The "max-conferences X gain X" under telephony-service sets up
all the required resources for conferencing. With transcoding
resources, the conferences will support both G711 and G729 callers
(which you have.) Keep i
I'm getting secondary dial-tone when hair-pinning a call back to PSTN.
Is there something you have to enable for this?
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
Is there something you have to enable to for trunk-to-trunk forwarding?
I've since deleted the dial-peers.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Yup.
sccp local GigabitEthernet0/0.210
sccp ccm 10.1.202.1 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register br2cfb
associate profile 2 register br2mtp
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729r8
maxim
It definatly works... are you using a TAG?
Chad
On 6/26/08, Gregory Jost (grjost) <[EMAIL PROTECTED]> wrote:
>
> I can never seem to get it to register via SCCP.
>
>
>
>
>
> Greg Jost
>
> Network Consulting Engineer
>
> Unified Communications Practice
>
> Cisco Systems, Inc.
>
> 214-274-1922
>
Hi Chad,
You were saying CFWD Calling Search Space has effect on Call Transfer?
Thanks.
On Fri, Jun 27, 2008 at 3:41 AM, Chad Stachowicz <[EMAIL PROTECTED]>
wrote:
> ccievoice1,
>
> you can achieve this with CFWD Calling search spaces of course!
>
> Chad
>
>
> On 6/26/08, ccievoice1 <[EMAIL P
oh you said transfer, not sure!
On 6/26/08, Chad Stachowicz <[EMAIL PROTECTED]> wrote:
>
> ccievoice1,
>
> you can achieve this with CFWD Calling search spaces of course!
>
> Chad
>
>
> On 6/26/08, ccievoice1 <[EMAIL PROTECTED]> wrote:
>>
>> Hi,
>>
>> Are you referring to " Block OffNet to OffN
ccievoice1,
you can achieve this with CFWD Calling search spaces of course!
Chad
On 6/26/08, ccievoice1 <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> Are you referring to " Block OffNet to OffNet Transfer "? But that is to
> restrict
> the transferring of an external call to an external device. But
I can never seem to get it to register via SCCP.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
From: Nguyen Le [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2008 1:24 PM
To: Gregory Jost
CFB will register with the HDV. However, they're never invoked in CME 3.3
On Thu, Jun 26, 2008 at 1:21 PM, Gregory Jost (grjost) <[EMAIL PROTECTED]>
wrote:
> Is it even possible to register a CFB resource to CME? Are only 3-party
> conferences allowed? I'm guessing that the phone mixes the me
Is it even possible to register a CFB resource to CME? Are only 3-party
conferences allowed? I'm guessing that the phone mixes the media for
these, so a DSP resource is not required.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
Right, but there's also a final destination configured. If the hunt
group is called directly via 3210, then it will ring 12 seconds on each
member then route to the final destination after 24 seconds. In my
experience, the aa "param max-time-call-retry 60" will take precedence
over the timeout/f
Hi,
Are you referring to " Block OffNet to OffNet Transfer "? But that is
to restrict
the transferring of an external call to an external device. But IP Phones
should be considered as internal device.
Thanks.
On Thu, Jun 26, 2008 at 8:42 PM, Cardwell, Mark <[EMAIL PROTECTED]>
wrote:
> I do bel
I do believe it is a system param. Transfer offnet enabled or something
like that.
Cheers!
Mark Cardwell | System Engineer | Presidio Networked Solutions |
[EMAIL PROTECTED]| Cell: 571.225.0132 | Office: 301.623.2000| FAX:
301.313.2400
From: [EMAIL PROTE
Hi,
In CallManager Express, I can restrict call-transfer to only 4-digits
internal DN#
!
telephony-services
transfer-system full-consult
transfer-pattern 3...
!
Just wondering, would I able to achieve the similar in CallManager?
Thanks.
20 matches
Mail list logo
