Hi All,
Has anyone had any luck with 12.4T and getting phones to register over EzVPN
? I am using an 1801 to connect and have tried various releases of 12.4T
without success.
I¹ve been through the archives and noted the information Jane Ryer kindly
sent to this list, unfortunately there isn¹t a 1
Hello Team,
I have an issue where my AAR is no kicking and I get "not enough bw"
Here is what I configured:
Phone A 1001 configs
External mask 408111
AAR CSS: AAR_CSS <<
Hello,
I'm not sure if it helps but I'll try a dial-peer for incomming MWIs on CME1
eg.
dial-peer voice xx voip
incomming called-number 800[01]
codec g711u
session protocol sipv2
You can also try this:
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008027fa9
Hi,
What is the difference between GDM owner and member?
In Documents ,I read that owner can change other users membership. but where
does this happen? Can owner change users on phone's menu?
where can owner change users setting?
Jeremy
If not explicitly told to account for users using an access code for emergency
numbers, should you still go ahead and add a 9.911 RP anyways, and do you think
it will count against you for doing it? I know it has been said that there is
no penalty for over configuration, but just want to make
Hi,
I have CME1---CME/CUE2 scenario. VMboxes are worked fine on
remote site but when I leave msg ,MWI not shows up on called phone as a new
meesage arrived 4 that phone.
CUECME2# sh mwi rel clients
ClientIPADDR EXPIRES(sec) MWI
===
Hi,
I already have this configs on routers:
CUE/CME:
ccn application ciscomwiapplication
description "ciscomwiapplication"
enabled
maxsessions 4
script "setmwi.aef"
parameter "strMWI_OFF_DN" "8001"
parameter "strMWI_ON_DN" "8000"
parameter "CallControlGroupID" "0"
end application
on CME
Hi,
I have CME1---CME/CUE2 scenario. VMboxes are worked fine on
remote site but when I leave msg ,MWI not shows up on called phone as a new
meesage arrived 4 that phone.
CUECME2# sh mwi rel clients
ClientIPADDR EXPIRES(sec) MWI
===