Hi,
HQ (unity) location 100 ipphone DN's 3002
BR2(CUE) location 200 ipphone DN's 4003
I try to setup vpim between cue and unity.
leaving msg from BR2 ipphones to extensions in HQ is OK.
but when I try to reach extension from HQ site (unity) I got "extension u
entered was not found" error
Hi,
I added that, but I ran transcoder for other purposes, I don't think that it
is related to voice mail.
Any way, wired thing is when I press message button I can see it dialed
pilot number and then connected ,but I cannot hear anything.
However, when I call , every thing is fine.
Jer
I do not see your XCODER defined in CME. Try adding sdspfarm tag 1
XCODER under Telephony-service.
Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 301.313.2041 | C: 443.789.1219
Hi,
I forgot to mention that when I press message button , call connects to
voice pilot number but I cannot hear anything
Here is the config:
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
!
!
!
!
!
mgcp
!
sccp local FastEthern
Post your telephony-service config and ephone-dn and dial-peer config.
Also are you using dial-plan pattern under teleph-service? If so you
need to make sure you have appropriate translation-rules.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of je
I forgot to mention that when I press message button , call even connected
to voice pilot number but I cannot hear anything
Jeremy
On Sat, Nov 15, 2008 at 3:12 PM, jeremy co <[EMAIL PROTECTED]> wrote:
> Hi,
>
> When I call to voice pilot number, it works, but when hit message button
> it would
hi Scott,
Yeah already defined that ,otherwise it's not a wired problem :D
Jeremy
On Sat, Nov 15, 2008 at 3:23 PM, Hardesty, Scott <[EMAIL PROTECTED]>wrote:
> Define voicemail pilot number under telephony service?
>
>
>
> Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked
> So
Define voicemail pilot number under telephony service?
Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 301.313.2041 | C: 443.789.1219 | http://www.presidio.com/
-Original Mess
Hi,
When I call to voice pilot number, it works, but when hit message button it
wouldn't work.
Can someone shed light on what may cause this issue?
I restarted cue and phones but it's not working.
Jeremy
I've been working through several WAN Qos scenarios and I keep getting hung
up in how to interpret requirements.
On one hand you have the max-reserved-bandwidth command, which is applied at
the physical interface.
Then you have the well-established rule of calculating 95% of CIR's for
frame sub-int
Hello,
> Little off-topic here, but if I want to have the option of having the
> caller press say 5 to get directions or business hours what script would
> allow me to play the wav file and either hang up or roll back to the
> auto-attendant?
You have to write your own script for that. There are
is MWI supported during srst? for example during srst you can leave a voice
mail at br1-phone1, but the mwi wont light up
Sara
-
Power up the Internet with Yahoo! Toolbar.
12 matches
Mail list logo