CrudI just tested this and proved myself wrong on this suggestion. I
could have sworn this was required, but I had it working just fine without
it running on the gatekeeper when I just tested.
sorry about that one.
- Original Message -
From: "Cliff McGlamry"
To:
Sent: Saturday,
Greg,
In continuing to look at this:
interface Loopback0
ip address 172.5.102.1 255.255.255.255
ip ospf network point-to-point
h323-gateway voip interface
h323-gateway voip id VGK ipaddr 172.5.100.1 1719
h323-gateway voip h323-id BR2-RTR
h323-gateway voip tech-prefix 1#
h323-gateway voip b
Greg,
Dumb question here. Have you executed the command "gateway" on the
gatekeeper? The gateway service is attempting to register (that's what's
throwing the error), but if the gateway service isn't also running on the
gatekeeper, it cannot communicate. You didn't post the gatekeeper conf
What do you see in ASN1 debugs...
-Original Message-
From: Greg Hauser [mailto:ghau...@cox.net]
Sent: Sunday, 1 February 2009 9:40 AM
To: Kumar, Narinder
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Gateway BR2-RTR failed to register with
Gatekeeper
Hi Narinder
Than
Hi Narinder
Thanks for your suggestion however you will note below from my last's night
saved configs I did in fact have the "gateway" turned up:
Pod15-BR2-RTR(config)#do sh run
Building configuration...
Current configuration : 9136 bytes
!
version 12.4
service timestamps debug datetime msec
serv
You are missing the "Gateway" command on BR2
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Greg Hauser
Sent: Sunday, 1 February 2009 6:53 AM
To: 'Greg Hauser'
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OS
Hello & Greetings, all.
Christian above is right. It is the RIS Service. Even if the CCM Services
show it is Active, try Stop / Restart the Service. At least for me, it did
the trick .. from displaying 'Not Registered' to 'Registered.' Dont know why
that happens, tho.
HTH. All the Best,
Kishan
Try this-
tinker panic 0
server 192.168.187.11 minpoll 4 maxpoll 4
driftfile C:\WINNT\system32\drivers\etc\ntp.drift # path for drift file
If you are syncing your sub to this pub, you may also want to add-
tinker panic 0
server 192.168.187.11 minpoll 4 maxpoll 4
server 127.127.1.1
I am so sorry grab an older config I did have the correct subnets last
night. All were in 10.5.0.0 subnet. I am showing the correct ones I used
last night here:
BR2-
interface Loopback0
ip address 172.5.102.1 255.255.255.255
ip ospf network point-to-point
h323-gateway voip interface
h323-gat
Hi-
Can anyone assist with my questions I have two issues but will direct this
email for this issue:
I was on POD 15 last night and as I was working through my configs I started
getting this error:
*Jan 31 05:51:53.746: %CCH323-2-GTWY_REGSTR_FAILED: Gateway BR2-RTR failed
to register with Gate
Gopinath is correct I have had this very issue happen last night as well as
the night before and I have gotten use to "bouncing" routers, switches, and
ports to get the gateways to come up registered.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun..
Ryan,
I never saw an official stance from IPexpert per say, but if you look at Vol 3
lab 5 solution task 5.43, it takes into account both MLP (13bytes) and Frame
Relay (4bytes) for a total of 17. I have always used 17 in my labs when
configuring this. If this is wrong, Please Mark or Vik, guid
Quick answer: Under the properties of the select resource step, change the
connect parameter to the appropriate value. Then you can drop in the play
prompt step and a connect step.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudyli
Question:
Config ICD script so that before the call is transferred to agent from queue,
the caller is notified that "conversation may be recorded for quality purpose".
put 'play prompt' step under select resource -> Connect, but no help
put 'play prompt' step after 'queue loop', no help either.
I didnt get a response on any of this... does anyone have an opinion on
this?
I know this have been talked about many many times... even I have replied
and posted about it, but has anyone heard a stance from IPExpert whether
MLPoFR with LFI is 13 (like the SRND kind of states) or does that 13 value
Hi Guys,
If we create one unity call handler that incoming call will forward to a
specific number ( a subscriber number) after greeting message.
To allow user to change the greeting, we can use either caller input in
subscriber or call routing to direct user to CUGA,
But my proble
Ntp Fudge is a 'keyword utility for ntp which can be used to configure
reference clocks in specific ways. It can be used to define calibration
constants to force a time offset to a particular time standard.'
(ie: to set or 'fudge' a timesource and stratum)
Example:
Server 23.230.1.10
Fudge 127.
All,
I am using proxy based IPMA
Manager line 3001 in Manager PT- IN SiteB
IPMA -CTI RP 3001 in IPMA PT
Assistant Proxy line is 1560 --In HQ
During normal operation everything works fine no issue.
During AAR Situation, when I dial Managers line (3001) the call hit the proxy
line but wh
18 matches
Mail list logo
