You can put offnet on gateway.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of jeremy co
Sent: 25 May, 2009 3:41 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] call classification, how to
An even more busted solution :) can't call into CUE if you do that
(expected) and doesn't fix the BACD issue. Thinking IOS bug...going to
try upgrading it just to check...
From: Cyrus [mailto:cyrus@gmail.com]
Sent: Sunday, May 24, 2009 10:11 PM
To: Kevin Ho
uncheck Outbound faststart and let us know what u get.
Cyrus
On Mon, May 25, 2009 at 1:02 PM, Kevin Hogan (kevhogan)
wrote:
> Attached...
>
> -CUCM trunk is gk controlled. Hardware MTP, Outbound faststart with
> 729, wait for 245 is unchecked (same results with checked).
> -1# tech prefix
> -B
Attached...
-CUCM trunk is gk controlled. Hardware MTP, Outbound faststart with
729, wait for 245 is unchecked (same results with checked).
-1# tech prefix
-BACD pilot is 3015
-Xcoders registered on CME. They show in use when the call works, but
not when it doesn't.
-Hitting DP on inbound a
this is the configuration of the BR2 router
BR2-RTR#sh run
Building configuration...
Current configuration : 3260 bytes
!
! Last configuration change at 04:55:54 CET Mon May 25 2009
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-enc
Hello Experts,
on the last item of lab 1B CME dhcp troubleshooting, i can't get the phone
to register
ephone-1[0] Mac:0017.94CF.219E TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
caps:0
IP:0.0.0.0 0 Unknown 0 keepalive 0 max_lin
Why don't use "call-forward pattern " as a toll fraud restriction tool
?
am I miss sth if I use it ?
Jeremy
On Mon, May 25, 2009 at 10:04 AM, Duy Nguyen wrote:
> Service param, offnet to offnet = false. For cme, tansfer pattern
>
> James Oberhaus wrote:
>
> >If I wanted to prevent
if calls come from PSTN ,how ccm figure out that it is a offnet call not on
net ?
for calls that going out of ccm, it is determined by option exist in RP.
Jeremy
Hi,
also try this for BACD
param max-extension-length 4
On Mon, May 25, 2009 at 10:04 AM, Duy Nguyen wrote:
> Service param, offnet to offnet = false. For cme, tansfer pattern
>
> James Oberhaus wrote:
>
> >If I wanted to prevent toll fraud at HQ, BR1 and BR2 by only allowing uses
Post the config
"Kevin Hogan (kevhogan)" wrote:
>Call from CUCM to CME BACD (lab v2 code)...
>
>1) Works fine on the first call from CUCM and CONTINUES to work fine IF
>I actually push a key on the CUCM phone so that BACD can route the call
>to the appropriate hunt list.
>2) Works fine on the f
Service param, offnet to offnet = false. For cme, tansfer pattern
James Oberhaus wrote:
>If I wanted to prevent toll fraud at HQ, BR1 and BR2 by only allowing uses
>to forward 4 digits what would be the best/fastest approach? I assume at
>BR2 the easiest would be
>ephone-dn 1
>call-forwar
OK, nevermind, had to configure
voice register global
max-pool 12
Then it worked...
J
On Sun, May 24, 2009 at 6:48 PM, Jonathan Charles wrote:
> So, getting a weird error...
>
>
> BR1(config)#voice register pool 12
> Pool tag too large, maximum 0
> BR1(config)#voice register pool ?
> <1-42
So, getting a weird error...
BR1(config)#voice register pool 12
Pool tag too large, maximum 0
BR1(config)#voice register pool ?
<1-42> voice-register-pool tag
So, it won't let me configure anything else...
I was following the configuration guide here...
http://www.cisco.com/en/US/docs/voice
If I wanted to prevent toll fraud at HQ, BR1 and BR2 by only allowing uses
to forward 4 digits what would be the best/fastest approach? I assume at
BR2 the easiest would be
ephone-dn 1
call-forward max-length 4
Is there any option in UCM other then a CSS in the Call Forward line of
every phone?
Call from CUCM to CME BACD (lab v2 code)...
1) Works fine on the first call from CUCM and CONTINUES to work fine IF
I actually push a key on the CUCM phone so that BACD can route the call
to the appropriate hunt list.
2) Works fine on the first call from CUCM, but FAILS to work on
subsequent call
Chris:
Glad to hear it.
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Sun, May 24, 2009 at 6:59 PM, Cristobal Priego wrote:
> Thank you Larry, It was just weird, I had access to CUC, Presence but not
> CCMs, Its working now
>
>
>
> 20
Thank you Larry, It was just weird, I had access to CUC, Presence but not
CCMs, Its working now
2009/5/24 Larry Hadrava
> Chris:
> In case the firest email did not come through:
>
> Cris:
> Please please use the "After Hours Support" option that is available to you
> within the web interface.
Chris:
In case the firest email did not come through:
Cris:
Please please use the "After Hours Support" option that is available to you
within the web interface.
Thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Sun, May 24, 2009 at
Hello,
I'm in the middle of the first lab, however when I try to access the servers
to start the basic configuration, I can't what do I need to do in order to
have access to the servers
thanks
Cris
Yes, you will miss out. Set up a PSTN cloud in your home lab and set up a
frame relay cloud, too. Money well spent, believe me.
On Sun, May 24, 2009 at 7:35 AM, Joel Jose wrote:
>
> hy,
>
> will i miss out on any imp feature if i use just 2 physical routers for
> t1/e1?.. i mean br1 and br2 wi
hy,
will i miss out on any imp feature if i use just 2 physical routers for
t1/e1?.. i mean br1 and br2 will have straight t1/e1 to each other without a
psnt cloud. and when i use HQ. i will detach one of them and load HQ config
on it.. yeah its time consuming... but pretty economical.. if i dont
21 matches
Mail list logo
