uh, oh. Correction.
If the first server in the CCM group is down, then it will gladly autoregister
to the second server in the group. Of, course autoregistration has to be
enabled for that CCM server object also. The two servers also seemed to allow
the same DN range, but I'm not sure what af
The overarching (nice word) requirements were to to use SUB first for
redundancy. There is no redundancy for autoregistration, so should be ok to
use either.
The server listed first in the (one and only) CCM Group (that is checked for
autoregistration) will be the autoregistration server. If
That's good stuff and a keeper post. Thank you.
From: Bill Talley [bill.tal...@aos5.com]
Sent: Saturday, July 04, 2009 11:00 AM
To: Michael Ciarfello; Erwan Erwan; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] X-lite in CM 7.0
Sure, sorry for the
On the cue the output of the following trace would tell you the answer:
Within cue cli:
No trace all
Trace network vpim all
Sh trace buffer tail
I think these are the correct cmds, I may have the syntax wrong. Post the
output and we should see the answer.
--
Vik Malhi CCIE #13890, CCSI #3158
Hi,
I set up VPIM broadcast system both direction cue <--> unity couple of
times on my home lab. But when going on remote rack, on attempting to set
this up I got mailbox does not exist in receipt error. from both
sides.
VPIM normal msgs are working.
distribution lists on unity ( a
Try restarting the MGCP process by issuing 'no mgcp' then 'mgcp' again
(assuming you're using mgcp)
On Sat, Jul 4, 2009 at 10:55 AM, jeremy co wrote:
> Hi,
>
> I tried very hard to register VG248 Gw, but failed each time.
>
> I read Docs about it, and try everything byt still couldn't make it
>
Hi,
I added Sup to callmanager group after I added T1 , but it wouldn't register
with SUB and keep registering with PUB.
I tried reset 6000 t1 module and also multiple restart of ccm manager
service and T1 as well. but same.
Any idea?
jeremy
Well rebuild fixed this, Ok with Remote Desktop and other browsers, must
have corrupted something on the previous build
Graham Hopkins
On 04/07/2009 09:40, "Graham Hopkins" wrote:
> Thanks Vik, but that has the same problem. Going to rebuild the server (its on
> vmware) with all the latest pat
Hi,
I tried very hard to register VG248 Gw, but failed each time.
I read Docs about it, and try everything byt still couldn't make it
register.
ip via DHCP assigned, I can telnet to it. Port 1 and 2 enabled.
port policy -> auto > so it should auto reg with ccm
all of my phones auto re
Working on lab 4.2 . The last point is "PSTN calls 3213000 goes to BR1 ph 1002.
In this CME phone can calll 3000 to reach 1002. CME sccp phone call to 300
works fine.
When CME SIP phone calls to 3000 the phone rings on 1002, after accepting the
call, the call get disconnected after 8 seconds
thanks bill,
so i suppose only the SUB server needs to be configured for
autoregisteration right?? or is there redundancy possible even in this
department??(i know for sure that there an be only 1 cucm group in a cluster
with autoreg enabled.. but within that cucm group can all servers have
autoreg
inorder to have HQ phones and B1phones autoregister.. how do we go about
it?? i mean they have diff DN ranges right...so got a little confusing... in
the PG the screenshots solving this are causing me to be confused... both
pub and sub will have the same autoregister DN range?? and can more than 1
Couple of things to check
1) Device pool: calling party transform CSS should be
"css-hq-xformation". Make sure this CSS has pt-hq-ani-xformation.
2) Route pattern 911: Use Calling Party's External Phone Number
Mask should be unchecked
3) On the phone: use device pool call
Jeremy,
Restart TFTP service. sometimes what you are transferring to flash is not
what you see in TFTP directory
in my case I can copy files from TFTP with old name than I renamed already!
At the end of the day , we are all trying to be bug expert in CCIE voice
journey rather than interne
Hi,
One of the requirements in Section 5.6 is ' When the HQ Phone calls 911 the
PSTN phone should see a 7 digit Calling number and name.
As per the proctor guide , I have the following configurations:
Calling party TP configuration:
Pattern 5XXX
Partition - pt-hq-ani-xformations
Use calling p
Thanks Vik, but that has the same problem. Going to rebuild the server (its
on vmware) with all the latest patches.
Looking forward to the Linux Appliance version !
On 03/07/2009 19:36, "Vik Malhi" wrote:
> Use Remote Desktop (MSTSC) to get on the UCCX and use browser on the server.
Hi,
I configured speeddial.xml many times and it works fine but I got this
error now, I even copy and paste same content from Doc CD but same happen
here.
This is the error on ipphone-> XML error [4]: parser error
I tried to access it via browser of my PC. I got this error :
XML Pars
17 matches
Mail list logo
