Volume 2 Lab 1 uses CUBE in conjunction with Gatekeepers, which is
confusing. Okay, I kind understand that mechanically CUBE works the same
way as an H323 gateway in that you send the traffic and if everything is set
up correctly it works. Why are gatekeepers and gatekeeper-controlled trunks
used
For budget conscious home lab purposes there probably isn't substantial reason
to go with multiple NICs, but I wanted to offer up a different perspective,
purely for technical value. Let me preface by saying I use my lab server for
more than just voice study. I also work with other Cisco applica
I use two nic cards in my pc that runs the vmware, so I can have access to the
internal vmware network (not a private address space), and the external
internet at the same time. But as far as the images themselves are concerned I
agree, there is no advantage of having two nics.
Cheers,
cd
Hi folks
Thanks for the advice - i'll give that a try and feedback on how that works.
regards
On Sun, Sep 13, 2009 at 11:05 AM, Nizar JAFRI wrote:
>Hi Dave,
>
>
>
> To solve this Issue, go to : edit > greeting > standard
>
>
>
> Under Caller hears > check My personal Recording
>
> Under
it should have a gradient of light color at top to dark color on bottom.
no text will show.
- Original Message -
From: "dave menk"
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] 7961 DEAD - anyone know how to bring them
back to life
Date: Tue, 8 Sep 2009 18:13:
I took a look at the initial configs for volume2, lab 1. There was no MGCP
config on the BR1 router, even though the workbook said not to permanently
delete any commands for the MGCP question. Not sure if the PL initial config
had MGCP configured or partially configured, etc.
If the above is
Answers in-line. Hopefully you can see the color.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Nara Shikamaru
[shikam...@kagadis.com]
Sent: Tuesday, September 15, 2009 4:40 PM
To: OSL Group
Subject: [OSL | CCI
I realized this as I wrote it. Its counter productive to selling PL time,
but then I see it as being similar to sharing configuration files for the
routers, no? It would probably make more sense if they're changing the
image that VMware is using, and if that is the case, then it isn't practical
I'm pretty sure they are copying images to get your PL lab session going.
Those might be too big at 10+GB each. Maybe they could post a BARS tar file,
but then they would sell less PL time. My opinion. They are running a
business and have to pay for that equipment somehow. The numbers of pe
Maybe someone at IPX could answer this for me... For those of us using
home/office lab setups has there been any consideration given to being able
to inject broken configuration into CUCM for troubleshooting labs much like
the ability to paste configurations into the routers & switches? I'm
presu
Can someone please help?!
Vol 1 Lab 10A says:
NOTE: If you are using your own Hardware Cisco 7961 Phones instead of
7962 phones, please perform the following: First delete the four 7962
phones that already exist in the DB. Next run the BAT tool for Phone
Install. We have already pre-pr
My question is not so much about specifics as it is clarity, would like to
know your opinion.
I'm working through implementing CUBE/SBC in this question (which I'm new
to.) As a Session Border Controller, the SBC allows the implementation of
security and conversion of voip traffic between codecs.
OK, Problem is partially resolved.
The Voice Mail Pilot CSS was wrong (HQ-International), had to change it
to CSS-TP, now is see on the phone +12123942123. After viewing the
detailed ccm-traces it seems to be that at a special point (somewhere
when the call is delivered to the VoiceMail-Port) t
Hello!
When i call the AA from the PSTN phone and dial 5002, the AA transfers
the call to HQ Phone 2, but on this phone the calling party number is
+1+12123942123, which is obviously wrong. If i call 5002 directly from
the PSTN phone, the calling party number is like it should be: 3942123
Conn
I think the INITIAL-configuration of the PSTN-router is wrong.
I have changed it in my home-lab:
voice translation-rule 1
rule 2 /^212\(3942123\)$/ /\1/ type any subscriber plan any isdn
With this config the debug isdn q931 looks like the output on page 63.
regards
Philipp
R Sam wrote:
> H
Hello,
the SIP phones are not registering to the callmanager
Anyone ever experience this?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hello All,
Branch two phones and router were configured appropriately
the phones were gettng ip addresses from the dhcp pool but do not register \
HAs anyone experienced this before?
Thanks for the anticipated support
___
For more information regardin
Hello All,
Am running three instances of IP Blue. After bringing them all up.
Registration flaps. they keep registering and unregistering intermitently.
Anyone with an idea
Regards
___
For more information regarding industry leading CCIE Lab training, p
18 matches
Mail list logo
