Hi guys,
Anyone know that how to send caller name under voip dial-peer, not pots
dial-peer?
Under the GK testing (UCM -- GK-- UCME) I can click display IE Delivery
in UCM and then I can see the caller name in the phone which registered in
UCME, but I can't find any command under UCME which let
Otto,
I was running Advanced IP Services 12.4(24)T1, and this command was
not available; only media forking and media statistics were
available. Then I searched for this command in the Command Lookup Tool
on Cisco.com, and I saw the media flow-around (for voice media) and
media
Jesse,
I've seen media negotiation problems with sip phones when the voice-class
codec is used, please try to set a fixed codec in your voice register pool
configuration, reset it and let us know the results,
i.e.
voice register pool 8
id mac ..
number 1 dn 8
codec g711u
Otto,
I have just tried to remove voice-class codec 1 and enter codec
g711u instead. I am getting the same behavior, i.e. DTMF is not
working.
The debugs look exactly the same way they did when voice-class codec
1 was configured.
Jesse
On Dec 13, 2009, at 10:46 AM, Otto Sanchez wrote:
Hi So,
I guess that you meen caller id from a phone registered to CME? Then you use
the name command under the ephone-dn.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: So Gwaai [sogw...@gmail.com]
Skickat: den 13 december 2009
Hello All
I am playing around with setting up outside callers to dial into a IVR and
have a password to go to IVR. Any one have a doc on this? I want outside and
inside callers to be able to join the same meetme conference.
thanks
--
J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI
Yahoo ID:
i have to re-download. but i get this error when i try to open the
downloaded file;
There was an error opening this document. The file is damaged and
could not be repaired
Anyone else get this, and how do we fix it?
this is getting frustrating, especially when you want to study
On Fri, Dec
I have the same Issue I can't open my files I get Server Error. I've
re-downloaded and re-installed the Adobe plug in No Dice.
On 12/13/09 11:46 AM, CCIE Downunder cciedownun...@gmail.com wrote:
i have to re-download. but i get this error when i try to open the
downloaded file;
There was an
i have un-installed, re-installed adobe .. no success at all..
did the re-download and install work for you?
On Mon, Dec 14, 2009 at 6:57 AM, Daryl Smith darylpsm...@gmail.com wrote:
I have the same Issue I can't open my files I get Server Error. I've
re-downloaded and re-installed the Adobe
I am getting the same issue. I have downloaded new content ok, having created a
new account and does the transfer, but I cant open it with the same error your
getting. Ive re-installed everything and tried mac and windows.
I think the solution is to take the weekend off, relax spend time with
I was also getting this message on some of the file. After some
troubleshooting, i found out that files were not completely downloaded.
Seems like the download terminates suddenly, before the file has a
chance to complete. I re downloaded all the wb1 files, watching each
file completion
Yes, most files I downloaded last week I could open, but the print option was
no longer available. One gave a corrupt pdf message. Now I can't open any
either. However the one file I have open is still good. Must remember not to
reboot my laptop :-)
Graham Hopkins
On 13 Dec 2009, at
I'm facing the same problem too It says file is corrupted and cannot be
opened.
Totally not happy with IPexpert. I expected a much better studying materials
quality and customer services for a $ 1999 product.
Don't be mad at me. I have the right to say my opinion.
Date: Sun,
It IPExpert giving out rack vouchers for all the trouble this Christmas
season : )
On 12/13/09 2:25 PM, A A f...@hotmail.com wrote:
I'm facing the same problem too It says file is corrupted and cannot be
opened.
Totally not happy with IPexpert. I expected a much better studying
You can try this with a Unity CallHandler and have call screening option
checked not sure about user name and password though.
HTH
Aman
On Sun, Dec 13, 2009 at 12:12 PM, J Hogan j.jho...@gmail.com wrote:
Hello All
I am playing around with setting up outside callers to dial into a IVR
and
Let me get back with you guys on this. Argh...
Regards,
Tyson Scott - CCIE #13513 RS, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto: tsc...@ipexpert.com
Telephone: +1.810.326.1444, ext. 208
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
IPexpert is
I am using unityconnection 7.1
On Sun, Dec 13, 2009 at 6:02 PM, Aman Chugh aman.ch...@gmail.com wrote:
You can try this with a Unity CallHandler and have call screening option
checked not sure about user name and password though.
HTH
Aman
On Sun, Dec 13, 2009 at 12:12 PM, J Hogan
Hi folks,
When doing Vol 1 lab 6A - AAR, do I need to implement the full CAC
configuration (i.e. Vol 1 Lab 10) before I can test AAR? Simply configure a
rsvp bandwidth command under the WAN interface does not seem to work.
Thanks,
Allen Su
I would just do Locations based CAC (no RSVP configured) at this point
of your studies. Thats gonna save RSVP, MRGs and MRGLs for now if you
are at Lab6 at the moment. Create one location, assign to the BR1
phones. Set the locations B/W to 48K for two calls to start with and
check this works. Then
Hi,
I could not get this question solved as per the solution mentioned in the
PG.
1. The SRST fallback incoming call at extn 1001 from PSTN hit the VM but I
don't get the Subscriber greeting but get a default message From a touch
tone telephone dial any extn.
2. How do it get the translation
Hi All,
What is the difference between the the *CDR Management* and the *CDR
Analysis and Reporting System Database Configure Automatic Purge*? And
why are these values different?
When I enter the *CDR Analysis and Reporting *section I get prompted with
Mail ID for 'user' is not available.
Thanks Adrian for the tip. I got that to work J
One interesting thing that I did notice - when calling HQ Phone 2 with
Mobile Connect/SNR configured, the call would just go directly to the remote
dest number (HQ Phone 2 would not ring), and the BR1 phone does not display
Network Congestion,
What is the Mobile/Connect using for a Route list. If it is using Local
Route Group (as I suspect) then it will use the local route group from
the perspective of the calling devices, device pool.
So if this is the case, BR1 Phones HQ, it maybe placing the call out via
BR1s local route group.
Hi Vik,
I am also seeing this in the lab. However, I did the lab per Vol 1 Lab 5C
(new dial plan), so the only route pattern that is using the local route
group feature is 911; everything else is using specific RG inside the RL.
Therefore, I couldn't have created the local route group problem
24 matches
Mail list logo