Hello Stephen,
In that case the H.323 gateway configured in UCM with the UCME loopback ip
address (h.323 incoming call source address) takes precedence over the h.225
trunk and process the incoming call instead, it's that way by design,
Please follow this SRND link:
Hi,
Have you consider the possibility of using cme as srst, you will have phone
name full control there,
HTH,
On Sun, Jan 17, 2010 at 4:54 PM, kill mill jha...@gmail.com wrote:
Wanted to run this by you guys. If BR2 is h323 and calling name
requirements are mentioned Then do we also take
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100119/f8b
58f30/attachment-0001.htm
--
Message: 3
Date: Mon, 18 Jan 2010 23:06:47 -0900
From: asif raza asifraz
Today I worked on la 2 of Vol. 2. I am confused about the solution given in the
PG for question 6.3
- Signaling traffic should be placed in the second queue, PG mentiones only
cos-map. Shouldn't this be done for the dsp-map as well?
- Third bullit: adjust SRR so that Q2 shapes to 50% of the
Please see the following link for installing/replacing a 4.2 CCM Subscriber.
NOTE: select the 'Server Replacement' option when prompted during the install
procedure.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/4_2/cm421ins.html
Basically you rebuild the server from scratch;
Otto,
Thank you for the response, and especially the link to the SRND reference.
So I guess that the only way to get this to work is to either support
H323 inbound fast start on the CUCM, or insert MTPs on the CUBE to
translate SIP early media to H323 delayed offer?
On Tue, Jan 19, 2010 at
Hi Otto,
I am talking about CME as SRST. The calling name is the
external Mask. Is there a way to change this behaviour ?
Thnx
On Tue, Jan 19, 2010 at 6:17 AM, Otto Sanchez o...@ipexpert.com wrote:
Hi,
Have you consider the possibility of using cme as srst, you will have phone
Guys,
I recieved the news about an 20 minutes ago, passed the lab which I took on
Friday in RTP! I cannot thank the people on this list enough (
Johnathan Charles, Amir, Otto, Vic, Mark, Amy, etc). Also a big thanks to
IPExpert who's material helped me along throughout the years.
I will
Congrats
On Tue, Jan 19, 2010 at 10:46 AM, Alex Hannah alex.han...@gmail.com wrote:
Guys,
I recieved the news about an 20 minutes ago, passed the lab which I took on
Friday in RTP! I cannot thank the people on this list enough (
Johnathan Charles, Amir, Otto, Vic, Mark, Amy, etc).
Congrats Alex!
Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Hannah
Sent: Tuesday, January 19, 2010 10:47 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CCIE Voice 25853!!
Guys,
I
Congrats Alex!
Regards,
Wayne A. Lawson II - CCIE #5244
Founder President - IPexpert
Mailto: wlaw...@ipexpert.com
Telephone: +1.810.326.1444, ext. 101
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
::Message sent from iPhone::
IPexpert is a premier provider of
Congrats! What did I do?
Jonathan
On Tue, Jan 19, 2010 at 9:46 AM, Alex Hannah alex.han...@gmail.com wrote:
Guys,
I recieved the news about an 20 minutes ago, passed the lab which I took on
Friday in RTP! I cannot thank the people on this list enough (
Johnathan Charles, Amir, Otto,
Cong!!! Alex :)
On Tue, Jan 19, 2010 at 9:16 PM, Alex Hannah alex.han...@gmail.com wrote:
Guys,
I recieved the news about an 20 minutes ago, passed the lab which I took on
Friday in RTP! I cannot thank the people on this list enough (
Johnathan Charles, Amir, Otto, Vic, Mark, Amy,
Double-check to ensure the CTI Route Point is registered, if not, delete from
UCCX and re-add. Also, UCCX requires g711 so if you are calling from a region
that will require g729, you will need a transcoder.
Mark Nigh
Systems Engineer
mn...@netelligent.com
(p) 314.392.6926
One more thing, make sure your CTI ports are registered too.
Mark Nigh
Systems Engineer
mn...@netelligent.com
(p) 314.392.6926
[cid:image001.gif@01CA9913.A0283B60]http://www.netelligent.com/
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf
Mark
I tried all of that an none of that worked.
all the cti ports are registered, indeed i went unified cm telephony and
created a copy of the trigger that actually works and still nothing. the did
that works and the one that doesn't come in on the same pri. its pretty much
the same path
any
Have you assigned the trigger to an application? You stated there is a trigger
that is working. Assign the new trigger to that application to test.
Mark Nigh
Systems Engineer
mn...@netelligent.com
(p) 314.392.6926
[cid:image001.gif@01CA9927.0F07E3B0]http://www.netelligent.com/
From: Cristobal
Congrats Alex Hannah
Khoilm
On Tue, Jan 19, 2010 at 10:46 PM, Alex Hannah alex.han...@gmail.com wrote:
Guys,
I recieved the news about an 20 minutes ago, passed the lab which I took on
Friday in RTP! I cannot thank the people on this list enough (
Johnathan Charles, Amir, Otto,
Hi Berry,Kill Mill,
Many thanks for the assistance , It was my mistake to ignore the Partitions.
I had gone through the PT/CSS but Its my fault.
Thanks God bless.
On Mon, Jan 18, 2010 at 6:21 PM, Berry, Matthew J. mjbe...@krollontrack.com
wrote:
Kavi,
Directed call park allows you to
After listening to Mark Snow's comments on SCCP to SIP firmware upgrades in
CUCME, I'm not surprised that I has issues tonight. I entered all the
necessary commands (I think, check me on this) to allow for registration. TFTP
aliases are in the config. The files are also there, preloaded for
Randall,
I took the summer and when through the BLS v2. I then got the v3 DVD
upgrade and listen to the audio in my car all the time. Mileage may
vary : )
I did some mock labs in the fall and never got through them in 8 hours.
I failed on my first attempt in October. I just got back
That was s nice of greg,
but my problem solved, I just went to bios setup and then I selecet the
Restore Default Setting saved it. And my Subscriber restored.
Thanks n Regards
Asif Raza
From: gpu...@doc.gov
To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com
Date: Tue, 19
Randall,
We have tried to summarize a typical path to CCIE success with our
³structured learning approach² which can be found here:
http://www.ipexpert.com/Cisco/CCIE/Voice/SLA-Voice
Jefferson- there is nothing to keep to myself, we all know you you are the
man and will give account of yourself
I would use UCM to do the firmware upgrade. Follow these steps:
(1) Add the CME phone into the UCM database (add a new phone).
(2) Assign a number to the phone- dummy number will do, just necessary for
SIP phones to register.
(3) Point the TFTP server of the CME phone to the UCM server running
Using telephony-service can you add the ³name² command into the ephone-dn
and ³show telephony-service voice-port². You should see the station-id name
set to the desired calling name. This is not possible with
call-manager-fallback which as you say places the external number mask into
the
25 matches
Mail list logo
