Hi Erwan,
Threshold values are introduced to support weighted Tail Drop, please refer to
QoS SRND for that
I shall suggest another document here: "Catalayst 3750 QoS configuration
examples"
HTH
_
Update to my Problem;
If i turn off the CCM service on the Publisher .. the SIP phones are
rejected registration to the SUB.. and will not register at all.
Anyone have any ideas please..
thanks
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist
Thats really wierd from ccm perspective
Can you check your dbreplication status, looks like the sip phones did not get
replicated to sub.
You can check it from rtmt-> database summary
Sent from my phone
On Jun 30, 2010, at 5:55, "Duncan Hamilton-Walker"
wrote:
> Update to my Problem;
>
>
I have configured DHCP scope for HQ & BR1 sites on Publisher. HQ Phones gets
registed without problem.
BR1 phones gets IP address and seem to be registered from UCM perspective.
However actual phone screen is blank and when I check device configuration, it
seem like phones are registered to T
Hi all,
I came across an interesting situation today for a customer and thought to
take input from you guys.
Customer has several sites which connects to Central CUCM cluster. Each site
has SRST enabled.
During Out of hours the main line is forwarded to a Hunt group which has
three interna
If it's straight srst (not cme) us the alias command with sequence
ordering under call-manager-fallback section.
Sent from my phone, apologies for any typos.
On Jun 30, 2010, at 12:48 PM, "Ashar Siddiqui"
wrote:
Hi all,
I came across an interesting situation today for a customer and
That's even assuming that Afzal is trying to stream the MOH from the CM servers.
If is attempting to stream from the branch gateway, then the max hops
is correct.
Afzal should do a better job on providing the relevant information
from the beginning so we don't have to shot in the dark providing
su
Finally fixed it by rebuilding the SUB and syncing the DB.. But don't know
what the problem was.. so frustrating.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Duncan
Hamilton-Walker
Sent: 30 June 2010 11:56
To: ccie_voice@onlinestudyl
Mouhammad,
>From the HQ router to CUCM, were you trying to use a SIP Trunk.
Because on the dial-peer you created, you missed to configure the
protocol:
dial-peer voice 102 voip
description *** outbound dial-peer for incoming CME calls, points to CUCM ***
destination-pattern [15]...
session targ
tks Mouh and others.
I read those, still not understand this, if you can help me.
When I run "auto qos cisco-phone " it generate (those threshold 3)
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 4 6 7
mls qos srr-queue output c
10 matches
Mail list logo