As per srnd.. there are some three commands required
emptycapabilityset
h225 connect pass thru
and 1 more which i could not recollect right now
On Tue, Aug 3, 2010 at 6:50 AM, CCIE Voice GMAIL <
givemeccievoice2...@gmail.com> wrote:
> I have a transcoder configured and associated with both the
I have a transcoder configured and associated with both the phones and the
GK/CUBE. Will that do the trick?
From: Mike Thompson [mailto:mthompson...@gmail.com]
Sent: Monday, August 02, 2010 5:56 PM
To: CCIE Voice GMAIL
Cc: OSL Group
Subject: Re: [OSL | CCIE_Voice] Supplementary Services with
Try integrating an MTP
Sent from my phone, apologies for any typos.
On Aug 2, 2010, at 8:52 PM, "CCIE Voice GMAIL"
wrote:
> Hi everyone,
>
>
>
> Is there something special you need to configure with a Remote GK in order to
> enable transfers or holds? I am fooling around with the various
Hi everyone,
Is there something special you need to configure with a Remote GK in order
to enable transfers or holds? I am fooling around with the various commands
under voice service voip, but nothing is giving me any success yet.
Thanks.
_
Anybody know if there is a work around for this. Trying to test some 3rd party
apps on my Call Manager which is running on VMware Server and they need the
SNMP Master Agent started.
You'll notice that "SNMP Master Agent" service fails to start if CUCM was
installed on VMWare
_
Nevermind. I forgot to reset the GW in CUCM. (Smacks head)
From: CCIE Voice GMAIL [mailto:givemeccievoice2...@gmail.com]
Sent: Monday, August 02, 2010 3:28 PM
To: 'OSL Group'
Subject: ISDN No Route To Destination
Hey experts,
I am receiving the following error when dialing into my ga
Hey experts,
I am receiving the following error when dialing into my gateway and wanted
to see if anyone had seen it before?
*Aug 3 00:03:33.972: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref =
0x00BD
Bearer Capability i = 0x8090A2
Standard = CCITT
Hi all ,
I'm confused with two latter parameters: drop-threshold1 drop-threshold2
mls qos queue-set output qset-id threshold queue-id drop-threshold1
drop-threshold2
*I know the meaning in 3550 switch as per this Doc
http://www.cisco.com/en/US/tech/tk389/tk813/technologies_tech_note09186a00801
Hi Angel,
I'm trying to achieve the same setup which connect my 7961 to cisco 2801
fa0/1, but the phone never get register and showing "Configuring IP..."
I configure a DHCP pool, from the debug i can see that the phone is sending
the DHCPD and the server did response and offered an IP address t
