Hi Brian,
I would change back their pattern as they are testing you on the following
concepts.
When the call comes into the GW on CUCM, the prefix values configured will
be added to the front of the number. In order to figure out how you will
prefix this you need to look at the debug isd
I have concluded the "preceding 0 that comes in from the PSTN" was incorrect
in the WB and PG? These are the tasks where it talks
about having +44 020 5943 2785 in the missed/received calls directory.
First, I was not getting the 0 or National in my debug isdn q931 on inbound
calls from the 2nd Bu
I don't think you need to register the gw before a hq conference. I do the
config in the iOS then cucm
Try you sip trunk to the voice interface
Hth
Randall
Sent from my iPhone
On Dec 20, 2010, at 2:53 PM, mudassar Khalid wrote:
> Thanks Randall. i was using same loopback ip for GW and GK.
>
Thanks Randall. i was using same loopback ip for GW and GK.
Now i need to add sip trunk to this RTR acting as sip registrar server. again
another interface!. Is it must to use saperate interfaces or any alternate
work around to use same interface for different technologies?(SIP/H323)
One mo
Maybe de words load-balancing is confusing, and maybe all your config is
fine, but you wait another result. If you want see the load-balancing
function you will need put two calls in Hold in se same time, and the
result must be one call in each MOH server.
Greetings
---
Hi Tamer,
It works You are the man ,Thanks alot. :)
Amr Sherif
Senior Network Voice Engineer
From: tih...@gmail.com
To: miroale...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Lab 9 Vol 2 Q 7.3
Date: Sun, 19 Dec 2010 23:49:48 +0300
Hi Amr,