Hi,
When I call CUCME phones from HQ, On CUCME phone (7961G) it displays "From
12123945001" but at the bottom of the phone it displays +12123945001.
Is it how it works ? can this be ignored ?
For h323 g/w both places does not display + that is known.
Jan 10 06:10:27.659: ISDN Se4/1/0:15 Q931
Hi,
When I call CUCME phones from HQ, On CUCME phone (7961G) it displays "From
12123945001" but at the bottom of the phone it displays +12123945001.
Is it how it works ? can this be ignored ?
For h323 g/w both places does not display + that is known.
Jan 10 06:10:27.659: ISDN Se4/1/0:15 Q931
Hi,
I had the same problem because of the replication. Try to reset your
replication.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of manishankar pandey
Sent: Monday, January 10, 2011 6:58 AM
To: Joli-coeur Wouter; ccie_voice@onlinestudy
Hi Prashant,
So you think the IOS version and the type of trunk under UCM will affect the
sequence display from the "show end regis" command?
Hi Miron,
Apologize that to hijack your thread for the question
Shingei.
On Mon, Jan 10, 2011 at 3:50 AM, Miron Kobelski wrote:
> 12.4(24)T2
>
>
>
>
Hi Shrini,
Personally i don't think the tech-prefix 1# will caused the call fail,as the
debug
shown,the decision tree will go to the next selection which is Zone prefix
if
tech prefix match failed,and also,tech prefix used for differentiate the
type of voice or video
GW within or outside a zone.
Try Changing the CCM Group listing nd make the Sub the 1st in the listing or
priority and see whether SUB trunk is getting registered??
ThanksM
--- On Mon, 1/10/11, bkvalent...@gmail.com wrote:
From: bkvalent...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
To:
Hello all - I've been following the Voice-OSL now for many months as I've
been "passively" studying for the Voice Lab since successfully passing my
written-exam back in March 2010. I've been sort of sitting on the sidelines
up till now as I'm now officially hitting the road with focused studies!
- Make sure both Pub and Sub in the CM-Group
- Restart CM service on both
- No Gatekeeper on router and check "show gatekeeper gatepoint" (there should be nothing register at this point)
- now run "gatekeeper" command on HQ router
- Restart trunk on CM
It should work.
Good Luck.
From: Frider
Could be a replication problem. Make sue the ccm cluster is in sync.
Sent from my Verizon Wireless Phone
- Reply message -
From: "Joli-coeur Wouter"
Date: Sun, Jan 9, 2011 5:52 pm
Subject: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
To:
Thanks for the info
I have a sub conf
Hi,
Yes both trunks should be shown on your gk endpoints
You can check if everything is ok in the CCM reporting level option database
status. Just to be sure that you don't have a database pb and in the same time
check your replication with a number of 2.
Regards.
Claude
Claude Friderich
Pr
can you ping the sub? check connectivity between pub/sub and between gk/sub
too.
what's the db replication status?
you can check this by running this command on the sub and pub:
"show perf query class "Number of Replicates Created and State of
Replication"
The state has to be "2".
On Sun, Jan
Thanks for the info
I have a sub configured for the correct CM group and the device pool has the
correct CM group and the trunk is in the correct device pool.
I think it might be a vmware problem or database problem?
i just want to be sure that normally both trunks should show up if they are
Hi,
Check that the device pool that you have assigned to the trunk has
appropriate CCM GROUP that contains both Call Managers...
Cheers,
On Sun, Jan 9, 2011 at 9:39 PM, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some problems with cucm/gatekeeper configuration.
> For some reason o
Hi Joli:
Make sure your trunk has been assigned a device pool that has a call manager
group with both servers listed. If it is using the Default DP it would only
be registering to the PUB.
hth...scd
On Sun, Jan 9, 2011 at 2:39 PM, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some p
Hi,
It seems you don't have Sub in CM Group configured for your trunk. Remember
to restart it later.
regards
kobel
On Sun, Jan 9, 2011 at 22:39, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some problems with cucm/gatekeeper configuration.
> For some reason only the PUB trunk is bei
Hello,
I am running into some problems with cucm/gatekeeper configuration.
For some reason only the PUB trunk is being registered.
Is the SUB trunk to register automatically or do i need to configure
something for that to happen ?
interface Loopback0
ip address 177.1.254.1 255.255.255.255
ip
12.4(24)T2
On Sun, Jan 9, 2011 at 20:46, Prashant Patel wrote:
> Yes Miron. Can you tell me what IOS version you are using on the GK router?
> I am using 22T.
>
> Thanks,
> Prashant
>
___
For more information regarding industry leading CCIE Lab trainin
Yes Miron. Can you tell me what IOS version you are using on the GK router?
I am using 22T.
Thanks,
Prashant
On Sun, Jan 9, 2011 at 2:34 PM, Miron Kobelski wrote:
> Prashant,
>
> Nope, doesn't work for me. The order is the same. Does it always work for
> you? ;)
>
>
> H.225 gk controlled:
>
>
>
Prashant,
Nope, doesn't work for me. The order is the same. Does it always work for
you? ;)
H.225 gk controlled:
BO25-CE-CCIE#sh gatek gw
GATEWAY TYPE PREFIX TABLE
=
Prefix: 1#*
Zone UCM master gateway list:
10.31.101.254:1720 UCME
10.225.101.12:42147 gk-trunk
Hi Miron,
If you use the "h225 trunk gk controlled" in type on CUCM and
"intercluster-trunk gk controlled" see if the results differ :)
HTH
Prashant
On Sun, Jan 9, 2011 at 8:58 AM, Miron Kobelski wrote:
> Hello,
>
> Some tasks require to configure GK so that the output of "sh gatek
> endpoints
Never mind. I forgot the service aa has been defined.
On Sun, Jan 9, 2011 at 12:56 PM, Michael Luo wrote:
> Hi,
>
> I'm using CME 7.1 on C3825-ADVENTERPRISEK9_IVS-M, Version 12.4(24)T3.
>
> It looks like I cannot specify the TCL script location in the "service aa"
> command. IOS was expecting
Hi,
I'm using CME 7.1 on C3825-ADVENTERPRISEK9_IVS-M, Version 12.4(24)T3.
It looks like I cannot specify the TCL script location in the "service aa"
command. IOS was expecting after that. Any idea? Thanks!
BR2-RTR(config)#application
BR2-RTR(config-app)#service aa flash:bacdprompts/app-b-acd
From: Friderich Claude
Sent: samedi 8 janvier 2011 19:38
To: 'ccie_voice-boun...@onlinestudylist.com'
Subject: SIP Overlapping - RFP 3578
Hello,
This is out of scope of the CCIE Voice Exam, but did anyone have experience in
SIP Overlapping respecting the RFC 3578 ??
PSTN Resources <-
Hello,
Some tasks require to configure GK so that the output of "sh gatek
endpoints" and "sh gatek gw-type-prefix" looks exactly the same as
requested.
I sometimes get different order of endpoints in my outputs, otherwise
perfectly in line with requirements.
E.g. I should have:
Hi Shrini,
When you dial 9.011919849098490, your gatekeeper hq-rtr receives an ARQ from
the gateway.
1/ Jan 9 03:56:47.631: //80452E7A0700/80452E7A0700/GK/rassrv_get_addrinfo:
(011919849098490) Tech-prefix match failed.
Your tech-prefix match failed
2/ your dialed number 011 and reminder of dig
Is there any other option?
I have internet over 3G USB dongle, can I use another router for that other
than cisco?
-Original Message-
From: dew.s...@gmail.com [mailto:dew.s...@gmail.com]
Sent: Sunday, January 09, 2011 3:19 PM
To: Julien Krieger; Carl Baccus; Naoufal Kerboute
Cc: ccie_voi
Nope. At least you need a cisco router to make a vpn connection in order to
support hardware phones.
--
Dew Swen / sent from mobile device
CCVP, CCDP, CCNP-Original Message-
From: Naoufal Kerboute
Sent: 09/01/2011, 12:02
To: Julien Krieger; Carl Baccus
Cc: ccie_voice@onlinestudylist.com
Still have them. 20 proctorlabs ccie voice lab voucher.
Regards,
--
Dew Swen / sent from mobile device
CCVP, CCDP, CCNP
-Original Message-
From: Dew Swen
Sent: 06/01/2011, 08:59
To: CCIE Voice Maillist
Subject: VRacks for Sale
I have 20 vouchers for sale if anyone interested.
Regads,
Hi guys,
It is possible to use vpn client on the PC and use hardware phones?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Julien Krieger
Sent: Sunday, January 09, 2011 12:55 PM
To: Carl Baccus
Cc: ccie_voice@onlinestudylist.com
Subjec
Hi Mudassar,
I hit a similar same issue with ANI transformations with SNR .
What happened to me with SNR it's that the transformations at RP level ( of
course the same that with a normal call were matched ) , didn't match.
If I moved them to RL level were matched.
I could solve it cause there a
Hi Friderich,
I want to configure without def tech prefix
Thanks
Shrini
_
From: Friderich Claude [mailto:cfrider...@netcore.lu]
Sent: Sunday, January 09, 2011 12:58 AM
To: Shrini; ccie_voice@onlinestudylist.com
Subject: RE : [OSL | CCIE_Voice] IP-IP GW Unable to call India
Hello,
Hello,
did you configure a default tech prefix ?
Message d'origine
De: ccie_voice-boun...@onlinestudylist.com de la part de Shrini
Date: dim. 1/9/2011 5:23
À: ccie_voice@onlinestudylist.com
Objet : [OSL | CCIE_Voice] IP-IP GW Unable to call India
Hi All,
I am working on IPIPG
Hi Carl,
I had the same wish to use my ASA 5505 to connect to protorlab's vracks but
proctorlab's support told me that they were not supporting it anymore as it
wasn't working corretly.
They told me to use one of the other available options.
Julien
2011/1/9 Carl Baccus
> I am currently working
Hi Shingei,
Called number is not reaching PSTN.
No output for deb gatekee main 10 and deb voip dialpeer
Below config is correct right ? wondering what else could be wrong.
Thanks
Shrini
_
From: ShinGei Yong [mailto:shingei.y...@gmail.com]
Sent: Saturday, January 08, 2011 9:30 PM
34 matches
Mail list logo