Hello,
There is no restriction although it mentioned clearly in lab.
But may you face problems in GUI, so be ready by both.
Note: CLI is faster.
Best regards,
Tamer Ismail
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ccie Voic
true i just want to try to follow a good strategy i read a couple of blogs
and the show pretty good options
i'm trying to get all the info that i don't know how to configure from
cisco.com
thank you for all of you that reply to my email
2011/2/2 Randall Saborio
> I only meant it for the studyin
you will have to manually dial the access code and then press the button
2011/2/3 Friderich Claude
> Hello,
>
>
>
> Can anyone tell me how to pickup a parked call with one of my IP phones
> configured with a monitor parked number ?? (directed call park feature)
>
> As I try to retrieve this cal
Hi there
You can only have one Direct park call per slot and you need a prefix. You
can create a speed dial to pickup the call.
Regards.
On 3 February 2011 16:54, Friderich Claude wrote:
> Hello,
>
>
>
> Can anyone tell me how to pickup a parked call with one of my IP phones
> configured wi
You can not pick up using directpark monitor button. Only way to pick up using
single button is to create speed dial button (808555). Hope this helps.
From: "ccie_voice-requ...@onlinestudylist.com"
To: ccie_voice@onlinestudylist.com
Sent: Thu, February 3, 2
Hi,
I do not have too much experience in CUE, So I just need to know if there is
some features must be done through CLI and I am not able to do it through CUI
and Is there any restrictions in the CCIE Lab to use GUI or CLI?
Regards,
___
For
hi Claude,
you need a separate speeddial...
e.g., if you configure the call park number with 4001
and you set the prefix for this slot to *, you
have to create a speeddial with *4001 to get this call from the slot.
hth
Steffen
Von meinem iPhone gesendet
Am 3 Feb 2011 um 18:54 schrieb "Friderich
Hello,
Can anyone tell me how to pickup a parked call with one of my IP phones
configured with a monitor parked number ?? (directed call park feature)
As I try to retrieve this call, I get park slot unavailable L
Of course when I dial the number (80 8555) it works fine. 80 is the retrieval
pref
Hi,
No.
The GUI config is for Cisco IOS MGCP gateway to pull its MGCP configuration
from a configuration server (Cisco Unified Communications Manager TFTP server.
Manual mgcp config in your router is not going to check your product specific
config layout
with the ccm-manager config and the ccm
The section of the ccmadmin interface you show below is only applicable
when you are running the MGCP gateway in "config server" mode, where UCM
truly controls everything related to the MGCP gateway and the MGCP
gateway downloads its config from UCM. Otherwise, it's the manual
commands you put in
While configuring MGCP gateway does the below setting need to
match CLI config ?
e.g.
R1(config)#ccm-manager
switchback ?
graceful Graceful switchback
immediate Immediate switchback
never Never switchbac
11 matches
Mail list logo