Yes, a sh isdn status showed "multiple frame established". More often than not
I have to actually apply:
Serial 0/0/0:23
isdn bind-l3 ccm-manager
Then
no isdn bind-l3 ccm-manager
isdn bind-l3 ccm-manager
in order to get "multiple frame established". In playing around with it today
I figure
Hi Roger,
Thanks for the daisy chain assistance, i am very grateful, i will try it out.
Regards
Pithog oil
--- On Fri, 7/1/11, Roger Carpio wrote:
From: Roger Carpio
Subject: Re: [OSL | CCIE_Voice] Can i Daisy Chain phones of Different device
pool
To: "Pithog Oil"
Cc: ccie_voice@onlinestud
Hi - this is a bug with mgcp when using l0
http://www.onlinestudylist.com/archives/ccie_voice/2011-May/074217.html
hth
On Mon, Jul 11, 2011 at 9:36 AM, CCIEVoiceKP wrote:
> Yes, a sh isdn status showed "multiple frame established". More often than
> not I have to actually apply:
>
> Serial
Hi All,
Its working.
It was h225 listen-port issue. I had it on 1820, resetting it back to 1720
(default) fixed the problem.
Thanks once again.
Sanoj___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.c
Hi everyone
Sorry to be completely off topic.
I am moving within this month and have some vouchers. Hoping my new location
will have enough space for my own lab.
So people who are looking for vouchers please let me know, and those with
equipment, also please let me know, will be looking for some
LinkedIn
Mark Drucker requested to add you as a connection on LinkedIn:
--
Erwan,
I'd like to add you to my professional network on LinkedIn.
- Mark
Accept invitation from Mark Drucker
http://www.linkedin.com/e/hej71y-gpzn4uej-2/vV
Cristobal,
How did you resolve it? I've run into same problem.
Thank you
> Date: Sun, 10 Jul 2011 15:32:52 -0700> From: Cristobal Priego
> > To: ccie_voice@onlinestudylist.com> Subject: Re:
> [OSL | CCIE_Voice] WAN QoS MLP LFI> Message-ID:>
> >
> Content-Type: text/plain; charset="iso-8859-1">
sure no problem
i configured MLP LFI manually and tested connectivity from BR2 and BR1 to
HQ, BR2 no problems, because there's no virtual-template
however from BR2 to HQ the connectivity was fine unless you reload BR2
router, once the router came back up, I lost connectivity to HQ and of
course al
hello all
cold you please let me know if the jitter shown on the QRT reports is one
way or round trip ?
thank you
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking f
hi expert,
if a customer ask you to source H323 signal and media from voice vlan
interface on CME router then what commands be issued?
i would do following:
1) Telephony-service
ip source address
2) int vlan
h323 v b s
Is this what you would do or something else?
thanks
-adil
Hi all,
Sorry for a bit of off topic.
I live in columbia, md.
Please let me know anybody interested in study group.
Thanks.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and
on h323 that command h323-gateway v b s binds the media
and the control signaling to that ip address
2011/7/11 Adil Shaikh
> hi expert,
>
> if a customer ask you to source H323 signal and media from voice vlan
> interface on CME router then what commands be issued?
>
>
> i would do following:
>
Hi All,
Hi ,
In CME SRST mode , we configured the privacy button in the SRST ephone template.
Privacy button configured in the CM mode also.
Even though enough of button available in the phone we couldn't get the privacy
button ?
How to proceed further on this ?___
Hi All,
Is there any other way to preserve the "BLF Key" in SRST mode ?
Thanks___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPla
14 matches
Mail list logo