Randall,
I agree if this question is in there it has nothing to do with expertise and
is just a cheap trick in my opinion or BS to give it another name :-].
Cheers
Kev
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On
Hi guys.
I can confirm that. In the past more than 1 year of my subscription to this
group, people have spread information like this. Some people couldn't
understand the question right in the exam. Some people tried to scare everyone
in this group.
I don't know much about the guy who
Hi Randall,
I agree with you don't want to go this road. Certainly Voice Lab is about
doing many things you would never do in real life
I guess that is why many of us get frustrated when they fail... :(
Julien
2011/11/22 Randall Crumm rrcr...@yahoo.com
Thanks Mark!
The real question
Did you make an MGCP Signaling and Media Bindings?
On Tue, Nov 22, 2011 at 2:16 AM, Peter Jeff peterjeff2...@yahoo.com wrote:
MGCP TS lab (6) what we can do for one way audio explanation on debugs
thanks
___
For more information regarding
Halo Guys Gals,
I wonder if CCIE VOICE training is available in Australia?
Thank You so much for letting me post the question.
Cheers,
Ben
Sent from BlackBerry® on 3
-Original Message-
From: Amit Singh batraji...@yahoo.com
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Tue, 22
Hello,
Is it possible in PRI ISDN to get the Alerting Name, in the LAB environment?
I mean, when the CUCM IP Phone calls CUCME IP Phone through the PRI, the
CUCM IP Phone will display the Alerting Name and Number of the CUCME IP
Phone? Just like the SIP and H323 trunks do when the CUCM is
Hello,
When the CUCM Cluster registers with GK, two endpoints are created in GK -
one for Publisher and another for Subscriber.
And to prioritize those CUCMs in GK, we have to use the zone prefix xxx
gw-priority command with appropriate values.
But how to prioritize CUCM Trunk in GK, when I am
Hello,
In some Workbooks, IPExpert and INE, there are some LABs, where the FR
Fragment size is calculated based on the PVC speed. But that is not correct
as I know, as the Fragment size must be calculated based on the actuall
Access Rate of an interface.
Could anybody explain me, why some LABs
Hello buddies,
I'm facing problem with sip phones 7940 not getting register with CME.
Any idea?
Regards,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a
Hi Ash,
Which statement do you say wrong in quoted email?
For a g.729 call we need IOS MTP registered to CUCM (v7) . Do we need to
allocate resources for that? ( we need to allocate resources only if we use
maximum-sessions hardware x option under dspfarm)
I saw IPExpert BLS solutions use IOS
Hi,
what do you mean by what we can do for one way audio explanation on
debugs ? 1) Are you looking for a strategy for debugging one way audio for
MGCP Gateways? 2) Or, are you looking for how to find the appropriate MGCP
Message for one way audio? Is the One Way Audio an error, which we have
Try configure upgrade and file text commands under the Voice Register
Global.
Also if your IP Phone and CUCME Routers are not in the same Broadcast
domain, then configure the Username and Password and set the authenticate
register command in Voice Register Global.
On Tue, Nov 22, 2011 at 2:53
Agree, I did this for my home router because I wanted dhcp reservation for my
pc at home.
Why would a enterprise do that ? Using the default Cisco dhcp in the cucm is
already one of the worst choice.
But oh well, this is how Cisco earn our money.
Sent from my iPhone
Pls pardon my fat
Ha Ha,
Always r eal lab question is different that is why it is r eal lab question :)
Ha ha
I have full lab now :)
Thanks
From: Randall Crumm rrcr...@yahoo.com
To: Peter Jeff peterjeff2...@yahoo.com; Mark Reed marklr...@gmail.com
Cc:
H a H a
R eal life experience and ccie is 2 different thing so whoever is thinking and
trying to match that it is stupidity
I know 15 to 18 years real life experts fail lab but i know fresher pass it so
next match it
and whoever match it is stupidity
Dear all,
Was just wondering if anyone else is on the 10 day bootcamp starting next
week
In san jose ??
Cheers
D
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and
Ok, but I am registering CUCM with GK, and not vise versa. So the GK has to
know the order of CUCMs.
I think that the DP will not tell the GK, which CUCMs to use as a Primary
one.
On Tue, Nov 22, 2011 at 7:24 PM, Luis Felipe Segnini Salas
felipe_segn...@hotmail.com wrote:
Hello,
You will
Just to make sure that we are on the same page; if you run the commad sh gatek
gw you get something like this:
Zone UCM Master gateway list:
10.10.310.11:36139 gk_trunk_2
10.10.310.10:45123 gk_trunk_1
Zone UCME master gateway list:
10.10.210.3:1720 BR2-RTR
But you would like the order of the
I took my second attempt at RTP yesterday and passed. Thank you to
IPExpert for the great study materials. Going through their materials 60
hours a week made this possible. Vik, thank you for the great explanations
in the videos. Amy, oh Amy, I'm sorry but I'm really looking forward to
hearing
I forgot the most important part. Mark L Reed CCIE #31990
On Tue, Nov 22, 2011 at 1:16 PM, Mark Reed marklr...@gmail.com wrote:
I took my second attempt at RTP yesterday and passed. Thank you to
IPExpert for the great study materials. Going through their materials 60
hours a week made this
Hi guys,
I am facing an issue I can't explain nor resolve. I hope you can help me
out on this one.
My goal is to use CUC for playing a short message and send the call back to
a CUCM hunt pilot.
I have played with partitions, CSSs in CUCM so that when I dialed 88
the call is sent to CUC .
CUC
Hi Dear,
Just a quick question. I do not know if is there someone here who uses the
proctorlabs ... but ..
Is it commum the labs loading be wrong ? An example , I am in the Workbook1 /
LAB 4 and I faced that all services in the SUB was down, but per my
understanding these services were
This is straight out of the of the QoS SRND:
*FRF.12 requires the actual fragment sizes to be defined manually. This
requires some additional calculations because the maximum fragment sizes
vary by PVC speed. These fragment sizes can be calculated by multiplying
the provisioned PVC speed by the
Yes, I think the same way as Ashraf.
So we need to use the Zone Prefix xxx gw-priority 10
name_of_the_gw(CUCM_Trunk)
On Tue, Nov 22, 2011 at 10:04 PM, Ashraf Ayyash ash.ayy...@gmail.comwrote:
You cannot,
You are relaying on the Tech prefix in this case to diff between the 2
endpoint so in
No the calculation is done based on PVC bandwidth and not on total interface.
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Nov 22, 2011, at 2:39 PM, datucha123 datucha123 datucha...@gmail.com wrote:
Hello,
In some Workbooks, IPExpert and INE, there are some LABs, where the FR
Username and passwors aren't mandatory.
Post your config. Also post the output of debug ccsip message
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Nov 22, 2011, at 3:12 PM, datucha123 datucha123 datucha...@gmail.com wrote:
Try configure upgrade and file text commands under the Voice
Ok, but the PVC Speed is not the same as the Access Rate.
The Access Rate for FR interface is set with the command Clock-rate.
Based on that, what you have sent, the PVC speed is the same as the Access
Rate of an interface?
*The computation of the fragment size must be based on the interface’s
I jave enabled the Dislpay IE on PRI and in CUCM.
But that is for Calling ID display.
And I am trying to get the Alerting ID Display.
Calling ID Display - Who is Calling (This I can do without a problem)
Alerting ID Display - Who are we calling to ( this I cannot do).
On Tue, Nov 22, 2011
Many congratulation Man ,
Enjoy the X Box Time :))
Ash
CCIE Voice # 31524
On Tue, Nov 22, 2011 at 12:17 PM, Mark Reed marklr...@gmail.com wrote:
I forgot the most important part. Mark L Reed CCIE #31990
On Tue, Nov 22, 2011 at 1:16 PM, Mark Reed marklr...@gmail.com wrote:
I took my second
Congratulations
I only wished we compared notes earlier, hooking up with others in the sane
boat seems to make the journey easier. Lots of luck and hope to be writing
something similar real soon.
Best regards
Larry
Sent from my iPhone
This email and any files transmitted with it are
Trolls. Don't feed them and maybe they will go away.
- Reply message -
From: datucha123 datucha123 datucha...@gmail.com
Date: Tue, Nov 22, 2011 1:38 pm
Subject: [OSL | CCIE_Voice] lab - 6
To: Ashraf Ayyash ash.ayy...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Did u try setting the brq to true in service parameters
I am 100% sure I sent u email yesterday.
Regards
Amit
Sent from my iPad
On 22/11/2011, at 1:14 AM, datucha123 datucha123 datucha...@gmail.com wrote:
I have the follwoing issue on GK:
So here is the configuration of my GK
Congratulations!!!
On Nov 22, 2011 10:43 PM, Mark Reed marklr...@gmail.com wrote:
I took my second attempt at RTP yesterday and passed. Thank you to
IPExpert for the great study materials. Going through their materials 60
hours a week made this possible. Vik, thank you for the great
I have not tested it yet, because I have not got to my LAB yet. I will go
to my LAB tomorrow and inform you if the issue will be solved based on you
e-mail.
On Wed, Nov 23, 2011 at 12:04 AM, Amit Singh batraji...@yahoo.com wrote:
Did u try setting the brq to true in service parameters
I am
Yes, I agree you need to specify the zone prefix priority command if you
want to control which CUCM receives the signalling and setup messages from
GK. With the default to priority 5, it will be random which CUCM receives
the incoming call.
I think this is one of those area's someone could lose
If it was me I would do this:
Change your after action greeting to transfer the call to your Call
Handler. (basically transferring to itself)
Change your transfer rules on the call handler to transfer to an extension
then type in your hunt pilot.
--
The call flow should then be:
You have a
Hi All,
I'm a newbie to this onlinestudylist and has been watching the emails
flowing into my inbox. I would like to explain the problem that I have at
present.
I have setup BR1-RTR as the MGCP gateway and the CUCM is setup
correctly.The next step of this lab is to make a call to the CUCM but
Congrats Mark!!!
Matt Just - IPexpert, Inc.
CTO - Chief Technical Officer
Email: mj...@ipexpert.com
Office: (810) 326-1444 Ext: 331
Mobile +1 (810) 406-7218
www.ipexpert.com/catalog
http://www.facebook.com/mattmjust Description: Description: facebook
http://twitter.com/#!/Matt_Just
So make sure I understand, you want a single call handler be able to
forward to multiple users/hunt pilots, ie: 1xxx? I know we can create a DN
1XXX and call forward all to voicemail, then have a rule in voicemail that
matches 1XXX and sends to a Call Handler. From there I cannot think of a
That's the thing... I tried by using next call routing rule but i can't get
it work with it...
2011/11/22 Chris Martin clm.c...@gmail.com
So make sure I understand, you want a single call handler be able to
forward to multiple users/hunt pilots, ie: 1xxx? I know we can create a DN
1XXX and
Type card type e1/t1 mb-slot slot
For example card type t1 0 0
*Emanuel Damasceno*
On Tue, Nov 22, 2011 at 9:21 PM, Errol Abrahams eabraham2...@gmail.comwrote:
HI all,
is there a special command to activate the VWIC2-2MFT T1/E1 card in a
cisco 2811 router. When I start the router it
I believe that you have to assign the card type to use it, it is a flex
card and as such you would type something like
card type t1 0/0/0
On Tue, Nov 22, 2011 at 5:21 PM, Errol Abrahams eabraham2...@gmail.comwrote:
HI all,
is there a special command to activate the VWIC2-2MFT T1/E1 card in
Why not to create a multiple zone prefixs to match '.' wildcard and assign
priorities.
In this case you aren't really using zone prefixes instead only the priority
option.
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Nov 22, 2011, at 10:04 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote:
Bill,
the syntax for that command goes as card type e1/t1 motherboard slot, card
slot
The controller command is controller e1/t1 motherboard slot, card slot,
card port that's why it is controller t1 0/0/0
So the card type command is issued in global config mode. Let's say your
card is plugged
Hello Experts,
As I practice more and more for my CCIE exam, I came across DDI
NANP:Predot. I have no experience whatsoever with the North American
Numbering Plan. All my projects were non-NANP Dial plans, so here is my
question: I know the : represents a prepend, but when the DDI is
NANP:Predot,
Hi All,
Thank you for your reply, appreciated.
Cheers
Errol
On Wed, Nov 23, 2011 at 2:22 PM, Emanuel Damasceno aedamasc...@gmail.comwrote:
Bill,
the syntax for that command goes as card type e1/t1 motherboard slot,
card slot
The controller command is controller e1/t1 motherboard slot,
Right, i did not have a router in front of me when I did it and my fingers
just typed muscle memory of 0/0/0
On Tue, Nov 22, 2011 at 9:38 PM, Errol Abrahams eabraham2...@gmail.comwrote:
Hi All,
Thank you for your reply, appreciated.
Cheers
Errol
On Wed, Nov 23, 2011 at 2:22 PM,
This is an automated reply to your message CCIE_Voice Digest, Vol 69, Issue
155 sent to stewart.mcfarl...@provista-uk.com.
Dear ccie_voice-requ...@onlinestudylist.com
Thank you for your email.
Please note that due to unforseen circumstances I will be out of the office for
the rest of this
48 matches
Mail list logo