I wanted to let you guys know that ondemand.ipexpert.com is fixed and you
should be able to stream from your iPad or other iDevice at this time.
Regards,
Matt Just
Chief Technology Officer
Description: logo2
Email: mj...@ipexpert.com
Office: (810) 326-1444 Ext: 331
Mobile +1 (810)
Try to reset the cti rp. Make sure that cti manager service is active and if
yes restart it. Make sure that cti rp name in ipma service parameter is
matching the one added in your devices.
After this post the output of the command utilis services list
Regards,
Mohammed Al Baqari
Sent from my
Hello Ken,
When you add 7965 phones (also 7945s) there are options where we can set
this in the options on the picture I am sending. The phones only turn off
the display when they register for the first time. All you need to do is
press the two square button (like a maximize button in windows),
Thanks for the support, Matt!
Thanks,
Michael Miller
On Tue, Dec 27, 2011 at 2:20 PM, Matt Just mj...@ipexpert.com wrote:
I wanted to let you guys know that ondemand.ipexpert.com is fixed and
you should be able to stream from your iPad or other iDevice at this time.
** **
Great, thanks a lot.
Based on the answer I got the next question:
That is for CUCM - I mean Enblock for SIP and SCCP Phones, so that CUCM
detects end of dialing for SCCP Phone.
But as for IOS Router, when it receives enblock digits, it does not matter
whether those digits were sent by SIP or
Hello,
I have a Cisco 2520 series Router, and the Octal Cable.
I want to make a Terminal Server out of them, but have a problem.
The Octal Cable has a big Connector for serial connection, while the 2520
has small Serial ports. (Sorry, I do not know the namings for Serial
Connectors and
Hi Dato,
The IOS router acts that way not because it's enbloc or digit by digit, but
because IOS dial-peer selection is first match.
Which means as soon as it's matched it will route the call, and not wait
for any more digits.
snippet (
Hi
I am having issues getting the CUPC soft client working. I have a hw solution
to PL. I am working on wb2 lab 4 and cannot get the cupc to operate in soft
phone mode.
Looking at the health it says td to failed. I triple. Heckled this and it is
configured correctly
Any thoughts?
Thanks
Sorry TFTP is failing
From: Rrcrumm rrcr...@yahoo.com
To: Ccie ccie_voice@onlinestudylist.com
Sent: Tuesday, December 27, 2011 11:32 AM
Subject: [OSL | CCIE_Voice] Presence soft phone
Hi
I am having issues getting the CUPC soft client working. I have a hw
Hello,
I'm in Workbook 2, Lab 8, question 4.5. I have CUE setup properly and
calls between CME phones roll successfully to voicemail. However, they
fail to roll to voice mail when an HQ phone calls a BR2 phone.
The answer guide says to configure an xcoder on the BR2 router. Here's
my
Did you enable cube?
Sent from my Verizon Wireless Phone
- Reply message -
From: John McGaughey (jomcgaug) jomcg...@cisco.com
Date: Tue, Dec 27, 2011 7:27 pm
Subject: [OSL | CCIE_Voice] Calls to CUE fail over WAN
To: ccie_voice@onlinestudylist.com
Hello,
I'm in Workbook 2, Lab 8,
Nevermind. I figured it out. I created a separate inbound dial-peer with g729
and that caused the xcoder to get invoked.
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
dial-peer voice 36002 voip
voice-class codec 1
incoming called-number 3600
dtmf-relay
Hi,
What is the definitive requirement for having mls qos trust and
service-policy on an interface to work.
In the 12.44 command reference
Classification using a port trust state (for example, *mls qos trust* [*cos
* | *dscp* | *ip-precedence*] and a policy map (for example, *service-policy
Hi,
Can someone explain the command, mls qos srr-queue input bandwidth 4 4: a
little and an example of having one queue with twice as much bandwidth as the
oterh queue (or something like that).
Thanks,
Randall___
For more information regarding
14 matches
Mail list logo