Hi all
Just want to get some advise regarding LAN QoS.
Let say if the question ask to apply priority queue and specify certain drop %
based on a COS value to the interface that connect to the router. What would
you do with the interface that connecting to the phone?
The reason I asked is
Hi All
I have an issue to get the cBarge to work when my H323 GW goes into SRST ,the
shared line shows up on both phones ,but when I have an active call on one
phone ,I don`t see the number on the other phone ,and the other phone does not
go into remote in use state when I press the shared line
Have you tried to turn off privacy and enable remote-in-use sofktkey through an
ephone-template attached to the ephone? Privacy setting on ephone has a bug in
SRST mode.
Peter
- Original Message -
From: Rynard Coetzee rynard.coet...@bytes.co.za
Date: Wednesday, February 22, 2012 1:51 pm
Hi Guys,
I am doing a lab thinking out of the box... what if we want to set a b-acd
tcl-like but for a gateway running MGCP, so a message is played before
sending to receptionist or . I know TCL doesn't work with MGCP, but VXML
does... do you have any idea how to set it up?
best regards
//r.a.
I am not familiar with VXML but you may do it as configuring the gateway being
also as a H323 gw and send the call back to it from CUCM. You set up a
dial-peer for incoming h323 call and enable bacd on it.
Also if you have CU or CUC than it can do it for you.
Peter
- Original Message -
Hi All,
I experienced some problems while doing full lab yesterday and I'd like to know
if you have any thoughts or ideas.
I used XP vm machine for each site with two network cards for each site (NAT),
IP Blue softphone (multiple instances), Cisco VPN client but had some problems:
- I
I also experience same problems regarding RTP audio.
Sometimes IPBlue services softkey doesn't work. But CIPC / softphone
registration problems are strange.
On Wed, Feb 22, 2012 at 8:48 PM, khaled Saholy khaled_sah...@hotmail.comwrote:
Hi All,
I experienced some problems while doing full lab
I configured srst ( using telephony-service) .
When phones are in fallback mode Redial softkey is dimmed on 7965 phones.
As per cisco docs , only unsupported softkeys are dimmed in srst mode.
Is this normal or can be any mistake?
Ken
___
For more
About these issues, are they happened because of VPN security filters? And will
it differ if we connect to the rack via router and hardware phones?
Date: Wed, 22 Feb 2012 21:34:25 +0530
Subject: Re: [OSL | CCIE_Voice] Proctorlabs Voice sessions and RTP Audio problem
From: kew...@gmail.com
Yes Peter, I have done all those options and they all work.
I just want to know how to configure VXML on MGCP, I have seen several
comments that it can be done, but nobody seems to know how to do it, and
there is no clear documentation about it in Cisco web page
I think this could come in handy,
will be generated, such as policy map etc. Do you normally
leave those in there on the phone ports?
Cheers
Vega
-- next part --
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20120222/4edd7d04/attachment-0001.html
Pls make sure you have configured
Yes I have tried it under the template and under the ephone.
-Original Message-
From: Farkas Péter [mailto:wormh...@sch.bme.hu]
Sent: 22 February 2012 02:58 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
Have you tried to turn
I would like to build-up a step-by-step IPMA Proxy mode checklist and
verification.
If you configure the IPMA route point (with DN a superset of Managers' DNs
like 5XXX), configure the IPMA Service Parameters
on both Pub/Sub and restart he IPMA service, ought the IPMA route point
appear as
13 matches
Mail list logo
