Hi all,
when running MVA, I can call a PSTN number. But the Calling number is not
sent in the ISDN setup message..
Anybody an idea where to look ?
When I dial directly from the deskphone associated with the remote
destination profile (whose remote destination is matched for MVA), the call
is
Post your gateway config...
-Chase
--
If winners never quit and quitters never win, then who coined the phrase, Quit
while you’re still ahead.?
Date: Sat, 19 May 2012 14:36:58 +0200
From:
Hey guys,
Has anyone discovered what goes wrong with the interfaces after applying
MLP LFI?
I am running the same problem on my lab3.
When I configure MLP LFI on both sides, the virtual interface stays up/down:
Virtual-Access110.10.111.2 YES TFTP up
down
I have already
Hello everyone, I searched the forums and found a question that I have but
there is no answer to it. Was wondering if anyone had any solution to this. I
am going to post the original question since it is the same as I have. Thanks
I have been working on Vol2 Lab 2 Question 9.3 SRST section
I've run into it...
Blow auto qos away and reboot, sometimes it takes 2 or 3 times, assuming the
router doesn't crash when you try to remote it...
-Chase
--
If winners never quit and quitters
Bruno,
save the generated config of auto-qos into a text file (class-map , policy-map,
interface, ..etc) , the remove the auto-qos command under the interface.
paste the config and if not worked, reboot the two routers.
Khaled
From: cm3_...@hotmail.com
To: brun...@gmail.com;
Once I removed the auto-qos command, the router crashed... no lucky today
with that!
Well, I was searching for older topics related to that on the list, and I
saw one from Cristobal Priego.
Basically he suggests to do the following workaround after configuring auto
qos fr-atm:
remove the
Sometimes this happens, many have complained about it, some only do manual
configuration, some figure out how to delete the template and reapply. It
is really up to you to find what way works best for you and learn how to
fix that method when you take the lab if you get MLP LFI
On Sat, May 19,
Hey Gang,
I have finally been able to assemble enough equipment (thank u Cisco) to build
a rack that mimics Proctorlabs racks but I'm running into one hell of a problem
with Frame-Relay. I notice that in the base configs for the PSTN/WAN router
that OSPF is configured and FastEthernet0/0 is
If NDA is strict. Why we have lab work books. Most of them are claiming
it's 'exactly ' as in lab. Even everyone is using the name CCIE - I do
believe its 'Cisco ' certified internetwork expert
On May 15, 2012 4:07 PM, Ken Wyan kew...@gmail.com wrote:
Hi,
Didn't you forget cisco NDA discuss
10 matches
Mail list logo
