It because you have Inbound faststart configured on your gk trunk. You do this
so your sip phones will be able to call from cme to hq. The thing is the call
is G729 but call manager will negotiate G711 with faststart enabled going that
direction. Take off the checkmark for inbound faststart and
Thanks to Justin , Randell for your awesome help. I will try this setting in my
next lab, and let you know with the updates. Thanks a lot once again for all of
you..
Krishna.
From: Justin McIntyre
To: "ccie_voice@onlinestudylist.com"
Sent: Thursday, June 14
Somebody from the group sent me a private message, but somehow I managed to
lose this message. This message was sent on my Facebook page, and I
received it on my iPad. So when I checked it on my computer, the message
was gone.
If you wanna know anything about the exam, I won't break NDA but I will
Hey guys,
Does anyone here has the BAT file for CUCM 8.6.2a? I am just asking this
because I am in need of this file and I don't want to install it in my
system just to be able to download the file from the installed CUCM...
Anyone?
Thanks in advance.
*Emanuel Damasceno*
CCNP Voice
__
Randall is correct here. UCM will always divert to the intra-region Service
Parameter settings. Change this to 729 and then hard code your codec between
regions within the region parameters section.
Thanks,
Justin McIntyre
Engineer
Mutual Telecom Services Inc.
a wholly-owned subsidiary of Bla
Michael,
I can replicate your observed behaviour by the following:
From the RDP, select the associated line on the top left.
When the "Directory Number Configuration" page appears, scroll down to
"Line 1 on Device X" where X is your RDP name.
If I leave the "Display ID" field(s) blan
I think I remember some tone a k this situation.
You chance the setting is service parameters for intra region to g729
HTH
Randall
Sent from my iPhone
On Jun 13, 2012, at 9:10 PM, Krishna wrote:
> Hi folks,
>
> I configured the gatekeeper on the Hq router, and when i call from hq to
> br2(c
Please clarify your scenario.
Is you cuc integrated witn cucm or directly with cme? Is it sip or sccp
integration? How the codecs all over the path are configured.
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Jun 13, 2012, at 10:13 PM, Pavan K wrote:
> CME SIP Phone is in remote site
Post the output of "sh call leg active summary" in cme.
Also, share br2 config plz.
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Jun 14, 2012, at 8:10 AM, Krishna wrote:
> Hi folks,
>
> I configured the gatekeeper on the Hq router, and when i call from hq to
> br2(cme) the call set
