Hi,
I am using proctorslab and unable to do prompt recording when selecting Phone
as a recording device. I don't receive any call on the specified Extension for
Recording.However it works fine when selected for Computer , Record and Play.
Can anyone guide me whats the problem is ?
Regard
Nehal
;Record and
Play.
Can anyone guide me whats the problem is ?
Regard
Nehal
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
-- next part --
An HTML attachment was scrubbed...
URL: lt;/archives/ccie_voice/attachments/20120916
Hi,
I can't remember where I looked before, but where can I find calculations or
info for WAN QoS for 10ms, 20ms and 30 ms
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are
Not sure of a good single reference for all this, but the calculation is...
(payload + IP/UDP/RTP overheaded + L2 overhead) x 8 x packets-per-second =
bits per second
payloads at 10/20/30 ms
g729 = 10/20/30 bytes
g711 = 80/160/240 bytes
(see page 139 of the voice SRND for other codecs)
hi guys,
Site A is an h323 gateway along with mva support... when calling from remote
destination number to internal phones, the calling name is not showing up on
the ip phones...only extension is showing up on the phone..in this case 3001 ip
phone displays 2001 number only when 3001 is called
Go into the DN instance on the remote destination and add the name. It doesn't
copy over from DN instance on the hard phone.
DQ
d...@cisco.commailto:d...@cisco.com
Sent from my iPhone
On Sep 16, 2012, at 2:32 PM, Krishna
vinayak_...@yahoo.commailto:vinayak_...@yahoo.com wrote:
hi guys,
Site
dan,
on the rdp profile, the extension indeed having the calling name and as well as
external number mask... when i call from pstn line(which is remote destinatin
number) to any cisco internal ip phone it recognizes the pstn line and shows
the internal extension and as well as calling name...
never mind guys.. after skimming the online blog, i see this is expected
behavior... the calling name does't show when the phone is ringing, it only
shows when the phone is connected..
thank you
Krishna.
From: Dan Quinlan (daquinla) daqui...@cisco.com
To:
Dears,
Its worked fine with the following configuration by using the magic command
incoming uri so the dial peer will be match based on the source ip
but the problem its work for sip trunk but in case if I have h323 trunk how I
can map the customer to incoming dial-peer based on ip as the