Hi people,
The softphone connect and disconnect like every 10 seconds please what do
I do?
Ola
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet
service with Etisalat easy net, available at all our experience centres
__
when configuring RSVP you configure your requirements for mandatory or desired
under call manager
then you also need to add your bandwidth requirements via the
interfacecommand ip rsvp bandwidth XXX
On Mon, Oct 22, 2012 at 1:53 AM, virajith wrote:
> Hi Guys,
>
> If we need to configure RSVP be
My responses in line.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of virajith
Sent: Monday, October 22, 2012 2:53 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Fews questions on RSVP config in lab
Hi Guys,
If
Are you using virtual servers? If you virtual server does not have enough
resources to run, that is a symptom I have seen before. But you definitely
have to check your PC Performance, Server performance, and I am assuming
your network connections are good. It is most likely a connectivity issue.
Just also notices you are using a VTGO softphone and I am not familiar with
that. I would download cisco ip communicator if possible.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cory Gray
Sent: Monday, Octobe
You are a little light on HD space, to run everything. I would go with ESXi 5
and use thin provisioning. I think you will get better performance if you use
ESXi vs Workstation. Until I got my hands on a UCS server, I built a home based
PC with 2 TB of drive space and 16 gig of RAM, and an adapte
Most Cisco UCM servers only require a 72 or 80 GB HDD so 400 should cover you 2
UCM (pub & sub) CUCx, CUPS, and UCCX.
Bill
On Oct 22, 2012, at 1:22 PM, "Craig Hill (crahill)" wrote:
> You are a little light on HD space, to run everything. I would go with ESXi 5
> and use thin provisioning.
The versions on the lab are not officially supported by Cisco in VMWare, but
this link will give a good guideline on the requirements if you follow the 8.0
trains. Can you run CUP and UCXN on 80 Gig drives in VMWare? Probably, but I
have had very few issues following the guidelines here. Also, i
Hi Everyone,
Thank you very much for all your suggestions and inputs.
Finally I have decided to build this server with ESXI 5.1. I initially
ran into couple of issues.
1. Got Pink screen error message : execute disable/no execute cpu
feature to be enable
2. vSphere client was unable to connect
Hi Cory,
Thanks for your inputs
Whenever I use Mandatory in the location settings the call fails and I see a
message on the phone saying "Not enough Bandwidth"
I have read that the callmanger does not directly participate in RSVP as it is
the agents ( in this case gateways) that decide BW al
You must set the location bandwidth to unlimited so that CUCM uses RSVP
determines if there is enough bandwidth. It sounds like you are using
locations CAC as well. You must do one or the other.
Sent from my iPhone
On Oct 22, 2012, at 11:34 PM, "virajith " wrote:
>
> Hi Cory,
>
> Thanks f
11 matches
Mail list logo
