Hey Brandon,
The only time I have seen weird issues when using ProctorLabs vRacks
is if I don't do a 'Revert Entire Pod' BEFORE loading the lab config
that I want to work with.
Amp
Quoting Brandon :
I've completed a few labs and did a search on this topic but didn't
find much.
I'
I've done some more research since I'm not going to have enough time to
complete the whole lab at this point.
What I've discovered is that I reverted to Lab 2B Final and I am still missing
the region and enterprise parameter as I noted before. However, the route
patterns that I had seen with t
The starting lab configs can be mixed up a bit. But you should expect yo do
prep work to work on the technology lab you are working on.
Hth
Randall
On Oct 26, 2012, at 6:33 AM, Amp wrote:
> Hey Brandon,
> The only time I have seen weird issues when using ProctorLabs vRacks is if I
> don't do
Hi Guys,
Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL).
I have configured the voice-card 0 to share the DSP like this
voice-card 0
no dspfarm
dsp services dspfarm
But when it comes to CFB configuration, the max number of session is 0-0 :D
It happened to me before on H
Try it with voice-card 0 with dspfarm also. Then the sessions under the
media resource.
On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL wrote:
> Hi Guys,
>
> Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL).
>
> I have configured the voice-card 0 to share the DSP like this
Same result :(
Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit :
Try it with voice-card 0 with dspfarm also. Then the sessions under
the media resource.
On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL
mailto:mcl.nico...@gmail.com>> wrote:
Hi Guys,
Looks like I cannot add a C
Complete shot in the dark. I am pretty sure moh uses dsp resources. Remove
the moh commands and try again. If that does not, keep the commands removed
and reload the router.
Sent from my iPhone
On Oct 26, 2012, at 1:02 PM, "Nicolas MICHEL" wrote:
> Same result :(
>
> Le Friday, October 26
I'm not using PL, but in my lab I had to reload the router before
reallocating DSPs to different services. I'd suggest doing "no dspfarm",
remove profiles, reload the router and then configure like you want from
scratch.
There is also a *show dspfarm all command, which should show you what DSP
is
Do show inv and maybe show diag | inc PVDM
also try show voice dscp group all
Or at least I think that might help see if the dscp resources are available
Bill
On Oct 26, 2012, at 12:02 PM, Nicolas MICHEL wrote:
> Same result :(
>
> Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit :
Well, "show inventory" should tell you what DSPs you have on the box.
Since Conference DSPs can't be shared, you need at least a DSP for this,
and a DSP to use for your PRI group.
So you're going to need either a PVDM2-32 or more than one PVDM2-16, I
suggest.
If you have multiple DSPs insta
After talking with support via the chat option, I've learned a few things. One
is that for the servers it is indeed loading another VM image as suspected.
So here's a few things I've learned over the past few hours:
There is a base VM image for each server loaded at the start of a fresh session
11 matches
Mail list logo