For AF classes, there's an easy trick:
AFxy => 8x+2y
It works for CS code points as well, since you can think of say CS2
the same as (non-existent) AF20.
--
Marko Milivojevic - CCIE #18427 (SP R&S)
Senior CCIE Instructor - IPexpert
On Thu, Nov 1, 2012 at 5:49 PM, Pixar Perfect wrote:
> Guys
>
Guys
any suggestions as to which is the best way to remember the class selectors to
DSCP mappings? I mean CS3 to 24 and CS1 to 8 ... any easy trick?
Thanks !! ___
For more information regarding industry leading C
Hello,
I have a stupid question which I need your thoughts.?
How do we consider these self paid amount towards CCIE training and
Lab exam fee while filling US tax returns.
Please let me if anyone have done this while filling tax returns in past years.
Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
Hi To all
First thanks so much all of you for your answers
Finally the issue was that the PUB had a different security key from the SUB ☹.
Then when I reset the security key in the SUB and the new was the same with the
PUB I followed the below steps and fixed the issue
1. Sub: utils dbreplicat
If you rebuild the pub from scratch, it will be unaware that there is a sub in existence (even if you have added the IP address through the GUI which only grants permission). I think the only time a sub gets added to the database for replication is when you actually build it and it initializes for
Steffen,
You're correct there is no "spanning-tree portfast trunk" for the ESW
but what you can do with regards to the ESW is enter the command "no
spanning-tree vlan 301" or whatever your voice-vlan number is and
still meet the requirement.
Amp
Quoting Cory Gray :
I have not seen bypass
Messing with NTP and disconnecting and reconnecting my PUB to my network has
caused similar issues in the past. Now I do not configure NTP on the PUB
until I am in the real lab. I tried all recovery methods and reboots. I
ended up just starting from scratch because I could not get my PUB and SUB
I have not seen bypass all of the spanning tree states in IPexpert's labs
and I cannot comment on what I have seen in the real lab. If portfast is a
requirement I guess you have to do what you have to do but I will say this
again.. I believe I lost all points on my CUCME section because my phones
Hi
I have followed the proposed solution but
On PUB
admin:utils dbreplication reset all
**
Replication Reset cannot be performed on a cluster with a single active node
Aborting replication reset operation
***
I still need the sw access mode, because there is no "spanning-tree
portfast trunk" command for the ESW and so I would lose the marks for the
vlan section because in most cases it is required to bypass all the
spanning-tree states or just that the phones should boot up as fast as
possible.
Regards
Hi craiq
Thank you very much
I will try it and will let you know
Do you know why in the admin page of PUB everything is unknown>?Is because of
the replication issue?
Regards
From: Craig Hill (crahill) [mailto:crah...@cisco.com]
Sent: Πέμπτη, 1 Νοεμβρίου 2012 3:06 μμ
To: Chrysostomos Christ
Try the following:
1. Sub: utils dbreplication stop (wait for it to complete before going to step
2.)
2. Pub: utils dbreplication stop (wait for it to complete before going to step
3.)
3. Pub: utils dbreplication reset all (monitor the dbstatus in RTMT for all
2's.)
4. Reboot the cluster and r
Hi
If you can help with that it will be appreciated
I have re-installed pub and then the replication is not working any more
Do you have something to propose?
admin:utils dbreplication status
utils dbreplication status
Status cannot be performed when
Oh okay. I apologize for the confusion I made.
2012/11/1 Cory Gray
> IPexpert and myself have run into problems doing it the traditional way.
> But for the authoritative source you should be looking at the LAN Switching
> Guide for IOS 12.4T which confirms that recommendation. The guide you
>
I had the same issue when I started the lab. I had never even configured a
UCCX integration in my life let alone a customer script. I did not find any
step by step guides out there that really explained the in outs. This is my
recommendation
1. Build your own from scratch. I don't hav
Mark,
You can download some scripting examples from Cisco's website and learn from
them. That's what I did to nail down UCCX Scripting (By no means I am an
expert in Scripting). Here is the link below.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cr
s/express_
hi Stefen,
Thanks for the programming guide.
Is this the only information that is available? or are there other
resources learn some basic scripting?
Thanks once again.
-Mark
On Thu, Nov 1, 2012 at 3:55 PM, Steffen Bruening wrote:
> Here you can find some scripting guides:
>
>
> http://www.
IPexpert and myself have run into problems doing it the traditional way. But
for the authoritative source you should be looking at the LAN Switching Guide
for IOS 12.4T which confirms that recommendation. The guide you point to is
for Metro 3750 switches. The ISR routers in the lab run 12.4T
Here you can find some scripting guides:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_programming_reference_guides_list.html
2012/11/1 sanity insanity
> hi Guys,
>
> I really need your help to understand UCCX scripts ...How they are made?
> and how they work?
>
> Please hel
Recommed by whom? Ipexpert, I know, but the problem is that the
Proctors/Scripts which marks your lab are not from IPExpert they are from
Cisco. Therefore it should be better to follow the cisco guidelines:
"You should configure voice VLAN on switch access ports; voice VLAN is not
supported on tru
20 matches
Mail list logo
