hi Guys,
My CUE module is rebooting erratically...
SiteC#service-module integrated-Service-Engine 1/0 session
Trying 142.161.120.98, 2066 ... Open
Waiting for IOS to register IP address.
nbsp;- waited 30 seconds...
Waiting for IOS to register IP address.
nbsp;- waited 40 seconds...
Waiting for
Hi
First check in PUB
utils network connectivity To verify that PUB and SUB have connectivity
1. Sub: utils dbreplication stop (wait for it to complete before going to step
2.)
2. Pub: utils dbreplication stop (wait for it to complete before going to step
3.)
3. Pub: utils dbreplication
Please unscribe me from this list.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hello,
I have configured BACD on Brach2 site CME When I dial pilot number 3500
from PSTN Line 4 : 3214-1891 It generate reorder tone and call is coming on
router and matching outbound dial-peer but script is not working.
Below is my configuration and debug output.
service queue
Must Look at this:
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/ip-telephony/blog/authors/harmsing
On Mon, Dec 17, 2012 at 9:05 AM, sanity insanity
networksanitytoinsan...@gmail.com wrote:
Hi Guys,
I am stuck with a problem . Hope you can throw some light.
Hi,
I would always go with a pots dial-peer.
Your external BACD dial in number is truncated to +343500 and therefore
it could not find a matching dial-peer, check your voice translation.
Am Montag, 17. Dezember 2012 schrieb Ramcharan Arya :
Hello,
I have configured BACD on Brach2 site
Hi
What is the 10.10.110.3 .Is the ip of the GW?
Also I suggest
!
dial-peer voice 223 pots
service aa
incoming called-number 3500
Chrysostomos
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Steffen Bruening
Sent: Δευτέρα, 17
Hi,
I always seem to have issues with getting my Site B and Site C RTR's to
register NTP to the Site A RTR. My configs are below...
scheduler allocate 2 1000
ntp source Loopback0
ntp server 10.10.100.2
!
I have also done:
scheduler allocate 2 1000
ntp source Loopback0
ntp server
What do the following say:
- sh ntp assoc
- sh ntp assoc detail
- sh ntp status
- debug ntp events
- debug ntp all
--
Marko Milivojevic - CCIE #18427 (SP RS)
Senior CCIE Instructor - IPexpert
On Mon, Dec 17, 2012 at 3:27 PM, Barrera, Hugo hugo.barr...@nexusis.com wrote:
Hi,
I always seem
Hello Bill,
I have bacd tcl file into flash memory.
Brach2#show flash | inc tcl
118 25804 Dec 15 2012 18:45:58 bacdprompts/app-b-acd-2.1.2.2.tcl
119 36667 Dec 15 2012 18:46:14 bacdprompts/app-b-acd-aa-2.1.2.2.tcl
Brach2#
when I call from ext 3001 to aa pilot ext 3500 it is playing
Hi Everyone,
I am sending my Branch2 router configuration can someone please try this
config in your router. I am trying to eliminate if my .tcl script file
might have some problem.
my IOS ver : System image file is
flash:c2800nm-adventerprisek9_ivs_li-mz.124-22.T5.bin
Many Thanks,
Regards
Use the workaround in CSCsy13363
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Barrera, Hugo
Sent: Monday, December 17, 2012 6:28 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] NTP Server
Hi,
I always
Run utils network capture port 8500 to see if the servers are in Phase 2.
If you see Phase 1, then you have a problem.
Peter
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Gurpreet Singh
Kukreja
Sent: Monday, December 17, 2012 9:00
13 matches
Mail list logo