Ok thanks i will try that soon
Randall
On Dec 22, 2012, at 11:15 PM, Steffen Bruening wrote:
> Only in the connect state, not in the ringing state
>
> Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
>> Sorry
>> I call from the local site B PSTN phone that is configured for a RDP and RD
>>
>>
Only in the connect state, not in the ringing state
Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
> Sorry
> I call from the local site B PSTN phone that is configured for a RDP and RD
>
> I call the MVA number put in my pin, press 1 to dial a number and dial
> 2001.
>
> When I look at the scree
Sorry
I call from the local site B PSTN phone that is configured for a RDP and RD
I call the MVA number put in my pin, press 1 to dial a number and dial 2001.
When I look at the screen of hqph1 I just see the extension 3001 is calling, no
name.
Should I see a name and number?
Thanks
Randall
O
What so you want to see? You are calling from a PSTN number into the XML
Script. When you call a internal number through the mva, you will the
number am when the destination hooks up and the call is connected you will
also see the name.
Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
> Hello
> I
You get points for questions in a particular section. If there is an OB
Unity Question in the Unity Section and SRST in the SRST section then no.
You could theoretically get a 100% on call routing and get a 0% on those
other two sections.
-Original Message-
From: ccie_voice-boun...@online
HI Guys,
I have configured cme-srst on my router to support phones &
gateway function when the wan is down and when my mgcp gateway unreg from
callmanger. Now the requirement is that voicemail forwarding using CUE should
work between ip phones as well as PSTN calls and that the forwarded cal
Does someone have a complete solution on how to configure LAN QoS in regard to
the CUpC client?
Thanks
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for
Hello
Does someone know a solution how to do the unassigned DN question?
Thanks
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.P
Hello,
Do you lose points in the call routing section if your SRST call routing is not
sending the correct ANI and/or DNIS or if OB calls from Unity Connections are
not sent with the correct ANI and/or DNIS?
Or do you just lose points for that particular question.
Hello
I have set up MVA and it seems to be working properly
One question,
Are we suppose to see name and number when we make a call to the MVA number and
then press one to dial another number and we cal an internal extension?
Thanks
Randall
___
For mor
*CUCM*
1. Configure Conf Bridge in HQ router - assign to HQ MRGL
2. Create meetme partition, assign to css HQPH1, so only hqph1 can call
(Bypass the CTI RP, and go to Meetme initiate)
Also assign meetme partition to Meetme-CSS and then
to *VM-port
Why is predot trailing needed for mgcp? I use always only predot and it
works perfect.
2012/12/22 Chrysostomos Christofi
> Ramcharan , hi
>
> ** **
>
> Both route patterns for the below are correct
>
> It depends what the question ask , or what is your requirement
>
> ** **
>
> **
Ramcharan , hi
Both route patterns for the below are correct
It depends what the question ask , or what is your requirement
1) With # in the h323 you don't have to use Predot trailing # you can
use only Predot but for MGCP GW its need it. But its not any harm if you use
Predot trailing
The second option will work with both route patterns. I tested it several times
and it always worked for me.
Regards,
Mohamed Gazzaz
Date: Sat, 22 Dec 2012 11:52:28 -0600
From: ramcharan.a...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP gateway : DDI for Interna
Hi Bill,
This is an ESXi 5.1 think deployment.
Regards,
Ramcharan Arya
On Sat, Dec 22, 2012 at 11:33 AM, Bill Lake wrote:
> Are you running this in VM inside an OS or ESXi
>
>
>
> On Sat, Dec 22, 2012 at 7:56 AM, Ramcharan Arya
> wrote:
>
>> Hello,
>>
>> My CUCM response is very slow when I
Tanner
Its working fine now
Thank you very much
Regards
Chrysostomos
From: Tanner Ezell [mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 9:03 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] uccx scripting side
Oops, you know
Are you running this in VM inside an OS or ESXi
On Sat, Dec 22, 2012 at 7:56 AM, Ramcharan Arya wrote:
> Hello,
>
> My CUCM response is very slow when I update Cisco Callmanager service
> paramter. It is running on vm.
>
> Can you please suggest is there any setting on vm to improve the
> perfo
Dors stopping multicast moh resolve the issue?
Sent from my Verizon Wireless 4G LTE Smartphone
Original message
From: Ramcharan Arya
Date:
To: scubajasona
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter
Ye
Yes MOH is configured as per task.
Is there any workaroun/solution to fix this problem.
Regards,
Ramcharan Arya
On Sat, Dec 22, 2012 at 9:04 AM, scubajasona wrote:
> Is multicast moh enabled? Seems enabling multicast slows my vmware
> workstation down. Floods 239.x.x.x nonstop.
___
Is multicast moh enabled? Seems enabling multicast slows my vmware workstation
down. Floods 239.x.x.x nonstop.
Sent from my Verizon Wireless 4G LTE Smartphone
Original message
From: Ramcharan Arya
Date:
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUCM s
Hello,
My CUCM response is very slow when I update Cisco Callmanager service
paramter. It is running on vm.
Can you please suggest is there any setting on vm to improve the
performance.
Rest everything works normal.
Please suggest if you have any technical detail to share about this.
Regards,
21 matches
Mail list logo