yes i did, and just recemtly after kind of having to prove it to them, they
did confirm it is an issue with the VM host server and are going to issue
me a credit, but that is not worth the loss of time, i am going for my lab
in 15 days and have a very tight lab schedule between now and then so the
did you contact support?
can you telnet to your routers and ping servers from there?
On Tue, Feb 5, 2013 at 7:18 PM, Steve Keller wrote:
> is anybody else currently in a v-rack session that started having
> connectivity issues about 1 hour ago? I am working on a lab nad All of a
> sudden i have
is anybody else currently in a v-rack session that started having
connectivity issues about 1 hour ago? I am working on a lab nad All of a
sudden i have no registration to my servers, no web traffic to servers and
i have been pretty much hard down for about 1 hour now...
___
Guys
I configured MGCP on a E1 controller using cc-manager config server it
generated the output below. Is there anything wrong with the config ? I want to
know if it is safe to do it during the real lab. It works in my own lab. Please
advise.
ccm-manager redundant-host 192.168.1.41
ccm-mana
Play with the WAN provider passing redirecting ie and not passing
redirecting ie.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Pixar Perfect
Sent: Tuesday, February 05, 2013 12:52 PM
To: whl...@gmail.com
Cc: ccie_voice@onlinestudylist
Check your CCM replication, and verify no un-asigned DNs.
Reset your jtapi user/password, and restart UCCX Node Engine.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIEing
Sent: Tuesday, February 05, 2013 2:31 PM
To: ccie_voice@
Do you have CUBE on gatekeeper as well? Try resetting "Wait for incoming
H.245 TCS" checkbox on the Trunk configuration in CUCM.
Sergey
On Tue, Feb 5, 2013 at 1:34 PM, vignesh sethuraman wrote:
> Hello,
>
> In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls
> to BR2 from
I ran into this same problem. if you check "Enable Inbound FastStart" on
you H323 gateway that should correct the problem. Its caused because you
are communicating between a SIP trunk and an H323 trunk.
On Tuesday, February 5, 2013, vignesh sethuraman wrote:
> Hello,
>
> In the task 4.7 of IPX
Hello,
In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2
from HQ and BR1.
But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone
but I could not answer the calls. Even after picking the handset, I could hear
the ringback on the BR2 phones.
thx bill will try it out before the end of this week and let u know.
Date: Tue, 5 Feb 2013 06:15:35 -0600
Subject: Re: [OSL | CCIE_Voice] Messages button in SRST
From: whl...@gmail.com
To: pixarperf...@live.com
CC: ccie_voice@onlinestudylist.com
Why not just set up calling party transformations
Can you configure SRST or CME-as-SRST to use a dash as the separator in the
date ? I don't see an option in 12.4T
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
Hi
It looks fine the configuration that you described regarding of the requirements
As the question about the Proctor ,i believe that no ones can answer that
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Pixar Perfect
Sent: Τρίτη, 5
Why not just set up calling party transformations that strip the extra
digits and apply it to the vm hunt. Make the patterns only match the
incoming numbers from site B?
In IPExpert advanced labs (OWLE/5 Lab pack) that would be 408387300X so
just make the pattern 408387.300X and strip it to the d
When Site B Phone 2 (DN 3002) hits the messages button in
SRST, the SRST call control dials 912025552220 to the PSTN to ring the
Voicemail ports at Site A. Unity plays generic Welcome greeting instead of the
user greeting of user 3002. The
requirement is NOT to use Alternate Exte
14 matches
Mail list logo
