You can still use "telephony-system" command, not the "setup" command.
You will need to use, very basic, the following command:
telephony-service
max-dn 2
max-ephone 2
ip source-address w.x.y.z <- IP address of your CME Interface
ephone-dn 1
number
ephone 1
type 79xx <-- type
Amit,
Thank you for your congratulations.
In order to pass the CCIE Voice LAB I followed a self-established protocol to
follow when performing the LAB. It took me 4 attempts which is nothing I'm
ashamed of and all attempts were a learning experience in developing my
Strategy to actually pass
Try modifying your config to this:
class-map match-any signal
match ip dscp cs3
match protocol sip
match protocol h323
match protocol mgcp
match protocol skinny
class-map match-any voice
match ip dscp ef
match protocol rtp
match protocol rtcp
On Sun, Mar 3, 2013 at 7:29 PM, Jason Lee w
Hello All,
The following question cross my mind while doing the NTP configuration
stuff..
What is the difference between the Phone NTP reference configuration in the
CCM Web administration page
and
The NTP reference on the OS Administration page??
does the 1st one for the endpoints where the 2nd
The Phone NTP Reference is used for SIP endpoints. SIP endpoints store a
NTP server address internally and they use the Phone NTP Reference
parameter to obtain that information. This parameter is not required for
SCCP endpoints.
The second is for the CUCM server.
You were pretty much spot on wi
Phone ntp reference is for SIP phones only
Sent from my iPhone
On Mar 4, 2013, at 4:42 PM, "CCIEing" wrote:
> Hello All,
>
> The following question cross my mind while doing the NTP configuration stuff..
>
> What is the difference between the Phone NTP reference configuration in the
> CCM We
Oh thanks a lot for your input.
Appreciated ..
On Tue, Mar 5, 2013 at 12:48 AM, Cory Gray wrote:
> Phone ntp reference is for SIP phones only
>
> Sent from my iPhone
>
> On Mar 4, 2013, at 4:42 PM, "CCIEing" wrote:
>
> > Hello All,
> >
> > The following question cross my mind while doing the N