Did you have an ephone-dn for conference ?
ephone-dn 10 oct
number 4200 no-reg both
conference
You need a conference DN for the cbarge to work
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Barrera, Hugo
Sent: Tuesday, March 19, 2013 8
Hi Guy's,
I was doing a lab yesterday and my Cbarge on CME phones was not working any
thoughts on why? I had everything thing configured as far as I can tell...
1. Cbarge in softkey template assigned to ephones
2. privacy set to off under ephones and tel-service
3. sccp conf
I started thinking about you issue and have another question for you. What
does your show ip route look like in CUE?
Michael Sears
Compucom Systems Western Region
Senior Infrastructure Solution Consulting
Office: +1.720.344.6833
Mobile: +1.303.328.5590
Fax: +1.978.863.0740
-Origi
Hello Jason,
It is strange that you can http to GUI when using another interface, like the
Interface Voice VLAN, for example, but I would through this out there anyway.
Do you have all the CME/CUE files downloaded to right directories in flash?
Do you have the following setup:
ip http server
ip
And what about the web admin command within CME config?
telephony-s
web admin system name pass
and
ip http authentication local
On Wed, Mar 20, 2013 at 6:49 AM, Ramcharan Arya wrote:
> Did he enable ip http server also ip http path flash/gui
>
> I suggest he need to xtract tar file and ma
Did he enable ip http server also ip http path flash/gui
I suggest he need to xtract tar file and make sure all files are there in
flash/gui directory
On Tue, Mar 19, 2013 at 7:33 PM, Bill wrote:
> Ip ospf network point-to-point
>
> And he said he can ping and session to it, web interface
Ip ospf network point-to-point
And he said he can ping and session to it, web interface is not working though?
Sent from my iPad
On Mar 19, 2013, at 6:31 PM, Andy Thanh wrote:
> Did you advertise this network through ospf? This is for simple command:
>
> router ospf 1
> network 0.0.0.0 2
I can ping the ISE from other sites. Just can't pull up the web page. Loking
for cue command to view http traffic
Sent from my Verizon Wireless 4G LTE Smartphone
Original message
From: Andy Thanh
Date: 03/19/2013 7:31 PM (GMT-05:00)
To: Sergey Heyphets
Cc: "Online Study
Jason,
Can you share your full Branch2 configuration here.?
Thanks,
Ramcharan Arya
CCIE # 28926 (R&S)
On Tue, Mar 19, 2013 at 6:31 PM, Andy Thanh wrote:
> Did you advertise this network through ospf? This is for simple command:
>
> router ospf 1
> network 0.0.0.0 255.255.255.255 area 0
>
>
>
Did you advertise this network through ospf? This is for simple command:
router ospf 1
network 0.0.0.0 255.255.255.255 area 0
On Wed, Mar 20, 2013 at 5:11 AM, Sergey Heyphets wrote:
> Jason,
>
>
> is your route to *1*10.32.60.253 ?
>
>
> On Tue, Mar 19, 2013 at 4:56 PM, Jason Aarons wrote:
>
>>
Jason,
is your route to *1*10.32.60.253 ?
On Tue, Mar 19, 2013 at 4:56 PM, Jason Aarons wrote:
> ** **
>
> What are some troubleshooting shooting steps for a
> CUE/IntegratedServicesEngine that is using ip unnumbered loopback0?
>
> ** **
>
> I can ping the ISE locally and from remote site
Hi,
Your IP route statement is wrong
It should be
Ip route 10.32.60.253 255.255.255.255 integrated-service-engine 1/0
Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
On Tue, Mar 19, 2013 at 3:56 PM, Jason Aarons wrote:
> ** **
>
> What are some troubleshooting shooting steps for a
> CUE/Integrat
What are some troubleshooting shooting steps for a
CUE/IntegratedServicesEngine that is using ip unnumbered loopback0?
I can ping the ISE locally and from remote sites, but I can't get the http
web page for the ISE to show (CME web page is good). I can ping
10.32.60.253 from another site bu
It depends. If the call path to the PSTN phone is going through a voice gateway
(SA, SB, or SC) then you will want to look at:
1. IP routing in your environment
2. Binding signaling protocol on your gateway
!SIP
voice service voip
sip
bind all source-interface
!h323
int
h323-g v bind src
One-wau audio issues are 99% of the time caused by routing issues.
Check your routing between CUCM and GW, perhaps a wrong mask, default
gateway etc.
On the rare occasions they are not caused by writing, ensure there is
a bind command ( for both MGCP and H323) and the send-rec command in
H323.
O
Hi Experts,
Can any one share there knowledge and experience on how to troubleshoot
one-way audio when the call is answer from PSTN phone which messages do i
need to look at on RTMT and which traces do i need to enable on CUCM to
check the One way audio problem ..
Thanks
_
Hello,
I knew that caller ID is not supported on mgcp gateway for fxo port. You should
use h323 gateway or you newd to change your analog line to channelized line
like bri or pri.
Regards
On 18 Mar 2013, at 18:32, "CCIEing" wrote:
> Hello Experts,,
>
> Does any one of you encountered the fo
17 matches
Mail list logo
