Hi Friends,
There is now new lab in HK my friend got it on 27th March be careful
andifanyone want to be study partner please email me back so that we can
talk more.
we have got few questions now.
thanks
___
For more information regarding industry leadi
Dear All,
Happy april 01st for all of you.. :-). Is there bug in voice LAB which we
need to use intra region codec as forced g729. If so what we need to
consider.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, plea
In versions 12.4(15) or newer it will have the embedded version so you should
have the embedded version on the lab.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html
Sent from my iPad
On Mar 30, 2013, at 10:29 PM, "virajith " wrote:
> hi Guys,
>
> What
I changed the hunt group and still didn't work.
Does anyone have a working B-ACD config with drop through using a VoIP
dial-peer that I can test with? I run script debug and the tcl script isn't
even being invoked.
Thanks.
Mike
From: Suresh Bhandari [mailto:bring...@gmail.com]
Sent: T
Yes there is a bug related to intra-region codecs. I've seen an issue when
using CUCM with gatekeeper. Not sure if the issue manifests in other ways or
not.
I follow the approach of setting G729 as the default intra-region codec as part
of my base config. I then ensure I "hard code" inter/intr
Mike,
I provided a known working config below. This is for a CME-SRST config. So, my
telephony-service config stanza will not line up with your CME requirements.
The moh line is the key bit here.
Out of curiosity, what interface on the local router is the IP address 10.2.2.1
bound to? You will
Even I had the same issue as Bill, and forced to hard-code the codecs.
On Mon, Apr 1, 2013 at 7:16 AM, William Bell wrote:
> Yes there is a bug related to intra-region codecs. I've seen an issue when
> using CUCM with gatekeeper. Not sure if the issue manifests in other ways
> or not.
>
> I fol
Experts!
I am still trying to figure out the issue, and wanted to throw a question.
Do we have to configure telephony-s, ephone-dns for MWI, and sip-ua etc on
CME prior to configuring CUE?
I am trying to test MWI, both unsolicited and outcalling, and none is
working. Everytime, I even restarted
Please avoid the message earlier.
It was just a typo of sip gateway address, due to which MWI was not coming
up.
Thanks
On Mon, Apr 1, 2013 at 9:57 AM, Suresh Bhandari wrote:
> Experts!
>
> I am still trying to figure out the issue, and wanted to throw a question.
>
> Do we have to configure
Experts!
While going through a number of tests, I found that if I configure CUE from
CLI, it won't find the MWI ON/OFF numbers configured in CME.
But for the same CME configuration, when I configure CUE from GUI, it finds
the MWI DNs.
It this expected, or I am missing something?
TIA
--
Suresh
Hello,
I just want to confirm whether my calculations are right or wrong.
Scenario: calculate the bandwidth for 4 calls and we are using g.729a with 10
ms and Frame Relay with FRF.12 (8 bytes as per QoS SRND).
We have 100 pps and the voice payload size is 10bytes
(40+10+8) * 8 * 100 = 46,400
464
hi all,
i am looking for ways to improve speed on configuring phone and line ext
in exam. for 3 hq phones ,2 sb phones , others sc phones
is there any way/trick to quick copy?
d
On Tue, Mar 19, 2013 at 8:43 PM, wrote:
> Hello Jason,
>
> It is strange that you can http to GUI when using anot
Your calculation is right.
On Mon, Apr 1, 2013 at 11:59 AM, Mohamed Gazzaz wrote:
> Hello,
>
> I just want to confirm whether my calculations are right or wrong.
>
> Scenario: calculate the bandwidth for 4 calls and we are using g.729a with
> 10 ms and Frame Relay with FRF.12 (8 bytes as per Qo
hi all,
i am looking for ways to improve speed on configuring phone and line ext
in exam. for 3 hq phones ,2 sb phones , others sc phones
is there any way/trick to quick copy?
d
___
For more information regarding industry leading CCIE Lab training, pl
14 matches
Mail list logo