It would be helpful to see your complete config. There are a few items that
need to be checked such as your voice class custom-cptone configuration,
complete sccp configuration, and your complete telephony service configuration.
I found meetme to be very sensitive and often times it boiled down
Without seeing your config, have you made sure you licenses are still good and
have you ruled out any network possibilities?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Saturday, November 17, 2012 7:42
MDCX 868 S0/SU1/DS1-0/23@HQ MGCP 0.1 <--- Modify Connection
C: D266c1d200F50001 <-- Call ID Parameter
I: 3 <-- Connection ID (Hex Value 0x3)
X: 17 <--Request Identifier
L: p:20, a:PCMU, s:off, t:b8 <--Local Connection Options (packetization period
is 20ms, codec G.711, vad disable
I think the best thing you can do is not give up. I failed back in Oct. after I
spent a considerable amount of time prepping via the Cisco 360 program. I
definitely feel like I put too much time into one training program that didn't
seem close to what I actually experienced. Since I haven't pass
Yes, or just modify the spoken name script in UCCX to record your prompts
there. I have had issues using UCxN to record prompts in the past. Now I just
do it in UCCX take less than 10 minutes to modify, refresh, and record.
Craig
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-
information should
be pushed up to CUCM.
-Original Message-
From: Dane Warner [mailto:dwar...@epochuniversal.com]
Sent: Monday, November 12, 2012 12:46 PM
To: Craig Hill (crahill)
Cc: ccie_voice@onlinestudylist.com
Subject: Re: CCX issue
When you say refresh, do you mean changing the password
You can refresh the rm and jtapi settings from within UCCX. You shouldn't add
them manually to the PUB. To get the IPCC extension, you need to associate the
phones with the rmjtapi application user.
Craig
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voi
If it doesn’t work immediately, restart the synch agent.
Craig
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos
Christofi
Sent: Sunday, November 11, 2012 10:01 AM
To: Cory Gray
Cc: Online Study (ccie_voice@onlinestudylist.com
Easy way to verify is to "show isdn service" and you can see all the channels.
Craig
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Lake
Sent: Saturday, November 03, 2012 12:51 PM
To: Chrysostomos Christofi
Cc: Online Study (ccie_vo
Try the following:
1. Sub: utils dbreplication stop (wait for it to complete before going to step
2.)
2. Pub: utils dbreplication stop (wait for it to complete before going to step
3.)
3. Pub: utils dbreplication reset all (monitor the dbstatus in RTMT for all
2's.)
4. Reboot the cluster and r
Hey,
I was hoping to get some input on my QoS calculations for header compression. I
have been using the Cisco 360 program, and in their exercise workbooks it takes
into account the 4 byte checksum for UDP, but I ran Wireshark in my lab to
confirm the values. From what I see, the UDP Checksum i
Don't give up. I failed on my Oct attempt, and I am going back again in Nov.
Give yourself some time to cool off, and then try to think back about the
sections you failed. Sometimes you can have everything working correctly, but
miss some of the fine details of what the exam was asking to see. T
recommendations, you will be tight on space, and I would again
recommend using thin provisioning to help offset some of this.
Craig
-Original Message-
From: Bill [mailto:whl...@gmail.com]
Sent: Monday, October 22, 2012 5:40 PM
To: Craig Hill (crahill)
Cc: Ramcharan Arya; ccie_voice
You are a little light on HD space, to run everything. I would go with ESXi 5
and use thin provisioning. I think you will get better performance if you use
ESXi vs Workstation. Until I got my hands on a UCS server, I built a home based
PC with 2 TB of drive space and 16 gig of RAM, and an adapte
It would help to see your BR1 router config. I can see you are matching
a default dial-peer inbound 0 and an outgoing dial-peer 911. The called
party number is 911, but your email says you want to call local and
international. Going to need a few more details.
Craig
___
That is a known bug. Just disable CDP on the port.
Craig
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vineet sanghi
Sent: Monday, May 11, 2009 10:39 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE
I have taken it 2 times and I was very close to making it the last
round. I would advise you to do the following:
1. Have a plan on how your going to attack the exam and stick to it. My
first attempt I went in with no plan and it cost me time.
2. Practice speed drills after you formulate your pl
Depending on how you setup your PSTN router and what platform you are
using, you may need to make sure the network-clock-participate command
is setup correctly. On certain platforms this is essential to do TDM
calls.
Craig Hill
Customer Support Engineer III
Customer Advocacy
[EMAIL PROTECT
18 matches
Mail list logo
