Good Morning.
I had an issue with my 2801 yesterday during my lab session and had to
rebuild. So I went to PL to get the lasted config. Having been on the
group for a while I know there have been changes and was hoping the
config on PL was updated. I wr mem'ed my router and started fresh.
I am up on pod 14 and things are ok. Try just reloading the turning on
and off the equipment that won't load for you. Also on of the Volume 2
labs was mislabaled. Try loading the Final config and see what
results you get.
Jefferson
___
For more
Mark,
Are you compressing on both sides?
Maybe I didn't read that right in your post.
Jefferson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Good evening.
I am working on Lab 2 from the 4 day instructor led calls this evening
(EST) and when I call from the BR2-LON line I get the following from
the PSTN router. I am dailling 77353002. I get a fast busy after 7735.
I can not call 011442077353003 either. I get a fast busy at the
Phil,
Good morning. I would look at the settings in UCM on the line on the
device. All the way at the bottom there are some check boxes for
called, Calling and redirected number. Then once the call gets to
Unity use the Port Viewer (??) in RTMT to see what Unity is seeing.
From there you
Randall,
I took the summer and when through the BLS v2. I then got the v3 DVD
upgrade and listen to the audio in my car all the time. Mileage may
vary : )
I did some mock labs in the fall and never got through them in 8 hours.
I failed on my first attempt in October. I just got back
I concur. I have not needed that command. Yet? I have not even tried
to type it in. Maybe it is a misprint.
Jefferson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Good Afternoon. (EST)
I thought someone asked this question but I can't find the responses in
my stored e-mail.
From the CLI on UCM you can start and stop services. I don't believe
you can activate services though correct?
Mine are not starting on my VM home lab and I can't web to the
It creates a config file I believe.
Good test question though.
Jefferson
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Thursday, December 31, 2009 8:59 AM
To:
I will see some of you in January in San Jose.
I needed a day to recover from the eggnog It is Sunday now and I am
working on a lab. I am committed.
Happy New Year.
Jefferson
___
For more information regarding industry leading CCIE Lab training,
This topic was been discusses before but this is what I saw today
during pl lab time. I am just sharing I don't think anything is wrong.
This was interesting.
The aa-drop didn't need the flash:bacdprompts/app
But the aa did needed the flash:/bacdprompts/app..
Notice the
It is my understanding Caller ID on the FXO with MGCP with the latest
code on the router and the UCM is supported now as long as you have a
FX0/DID card.
Don't take my word for it though. Check the latest compatibly sheet on
Cisco's website. Which maybe you did and now Cisco is saying UCM 8.0
We all learned from it.
Thank you.
Jefferson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
.
Thank you,
Jefferson
From: Otto Sanchez [mailto:o...@ipexpert.com]
Sent: Saturday, December 05, 2009 3:17 PM
To: Jefferson Wilson
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] V2 Lab 5 Transformation Patterns
Hello,
Task 2.8 requires only sending ani in e.164 format
So I am not going crazy can someone try to access the PL web site.
I am in the middle of a lab and I lost connectivity to it yet I am still
VPNed in and talking to UCM.
Thank you,
Jefferson
___
For more information regarding industry leading
Thanks. It just came up again on my lab pc and my back up pc.
Hmmm. I almost went to get Howard. : )
Thanks.
-Original Message-
From: Wayne Lawson [mailto:groupst...@ipexpert.com]
Sent: Saturday, December 05, 2009 5:25 PM
To: Jefferson Wilson
Cc: ccie_voice@onlinestudylist.com
Ok. I am have seen this a couple of times now. I am going to look it
up but am in the middle of a lab and thought maybe someone else has seen
it.
I am working on v2 lab 5.
Jefferson
Dec 5 23:09:13.439: ISDN Se0/0/0:15 Q921: User RX - SABMEp sapi=0
tei=0
Dec 5 23:09:13.439: ISDN
I got a response and it worked.
remove your L3 binding and put it back on..
then no mgcp/mgcp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I would hit save and then run the no mgcp/mgcp from the VGW.
I am not using the ccm-manger config server since this is a F-PRI.
Jefferson
-Original Message-
From: Talmadge Almand [mailto:t...@ipexpert.com]
Sent: Saturday, December 05, 2009 7:01 PM
To: Jefferson Wilson; ccie_voice
Yes shut and no shut on the voice-port also seems to work.
Jefferson
-Original Message-
From: Talmadge Almand [mailto:t...@ipexpert.com]
Sent: Saturday, December 05, 2009 7:16 PM
To: Jefferson Wilson; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] ISDN Bad Frame
Shut
Good afternoon.
I am working on V2 Lab 5 this afternoon and tomorrow evening. (EST)
I am getting secondary dial tone from the FR line when calling FR. The
call never makes the FR VGW.
The inbound UK calls don't go through but I will troubleshoot that
since they make the UK VGW.
Wilson; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] V2 Lab 5 PSTN-WAN Router
Varify your inbound DPs ensure that direct inward dial is configure on
dest router
On 12/4/09, Jefferson Wilson jwil...@annese.com wrote:
Good afternoon.
I am working on V2 Lab 5 this afternoon
I worked on V2 Lab 5 today and then went to look at the PG to review how
I did things.I am trying to figure out form PG57-58 how to have
911/999/112 calls send an calling number type of National while 1
question later a local call sends a calling type of Subscriber.
Both questions use
Happy Thanksgiving everyone. (US Holiday)
I was looking over some posts and some labs and read the theory behind how CUE
handles redirected calls. This comes into play for BACD on some of the labs
from IPExpert.
My additional thought though is this.
Now that we can get the CUE to answer
I concur with Michael on this.
I thought my demo secure CRT for the home lab was different then the lab
though. Are there 2 versions?
The BLS video's mention to be practice with it though. Putty and CRT
have different key stokes to cut and paste. I have not broken down and
paid $100 for the
Based on the fact the UCM doesn't have a show ip dhcp binding command
of some sorts I wonder if there is a run slq * command of some kind.
I found once that I had to reset the DHCP monitor service for DHCP to
work. I had a good config but stressed over what am I missing.
What is a good
I have heard from anyone as of yet. Does anyone have working ASA config
they are using for PL for HW phone access?
Thank you,
Jefferson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Good Evening.
I am working on a PL session that has normally worked but tonight it
doesn't. The afterhours support team is looking into it.
So in the mean time I am killing time and looking at other ways to
connect. Has anyone had any success with the ASA's for the PL session
with HW
For the Volume 2 Lab one load the second Initial button on the first
one. I still have a 2801 connectivity issue this evening for some
reason (worked the last time) but at least I can config things. Now
since I we should be able to do these in 6 hours I have 6 hours left.
Gotta type like the
Disble cdp on the port that goes to the vm servers. That might fix the duplex
match error.
Please excuse my shortness and bad grammar when responding from my PDA.
-Original Message-
From: ccie_voice-requ...@onlinestudylist.com ccie_voice-
Good Evening.
I have been working with the PL support folks a little bit on this but
want to review with the rest of the group.
On the days I offset my home lab with PL time I can't seam to come up
with a good way to connect. I have tried Intenet Connection Sharring (
ICS) a couple of
I don't believe there r. I even had issues getting Volume 2 lab 1 to work
today. I heard PL is a couple weeks out. If I am wrong please chime in if
someone else knows.
Jefferson
Please excuse my shortness and bad grammar when responding from my PDA.
-Original Message-
From:
Does your 2801 have the power supply that supports power to the ESW?
I ordered a Cisco2801-V/K9PWR-2801-AC and it had the wrong power supply
in it. I had to order the PWR-2801-AC-IP power supply and install it
myself.
The correct power supply should run the length of the back of the
chassis.
Very Funny. I am glad to see we all have a sense of humor in the middle
of a very challenging pursuit. And thankful the ICS is not on the lab.
: )
I found out after talking to Procotor Labs over e-mail that if I set up
my equipment on 192.168.1.0 then that should work. I was using a
different
Has anyone had any luck with HW phones behind the Cisco VPN client
connected to PL? I have ICS set up on the wireless and my Ethernet port
shears that. The phones are DHCP'ed and are not connecting.
My questions is with the ICS config though. I have my laptop FW
disabled but I am
Got it.
Jefferson Wilson
Network Consultant
Annese Associates, Inc.
(585) 292-5590 Office ( (585) 292-5595 Fax (585) 286-2961 Direct
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ
Good Morning.
I followed the blog on using the s/w vpn with ICS with HW phones behind
my laptop nic. I static assigned my HW phone's as per blog but they
won't reg with UCM or CME. My wireless is my connection to the
internet. I am on my company wireless though and not my home wireless.
One
Jeff,
I have been down a similar path. When you get to the proxy setting I
found on a project I did that is was case sensitive. Also reboot your
CUPS server if you think you have the config correct. I have seen that
fix things also.
Jefferson
-Original Message-
From:
Yes it is down for me also. I am on EST and it hasn't been up since my
schedule lab time at 8 AM. If you browse their site there is a message.
Their e-mail is posted there also. supp...@proctorlabs.com. They are
fairly responsive except today they are busy fixing the issue I bet.
I am
39 matches
Mail list logo