Hi MJ,
Martin is right, I had issues with SNR after configuring the RD to 7 digits
and setting the service parameter to complete match, MVA and SNR wouldn't
go together. Martin however has proposed a new fix, you could try it. The
workaround I used for this was to create an "Application Dial Rule"
Hi,
OR
You could assign a different partition to the line that you associate with
remote destination profile. While configuring "RDP", the line extension
(Towards left, the partition option is only available after saving the RDP
config) that you see is different from the line that's associated wi
Hi,
I would go with option 2.
Cheers,
Laksh
On Mon, Sep 16, 2013 at 4:50 PM, Alex Mendoza wrote:
> Hi all
>
> Please share your thoughts.
> What option will you do on this one.
>
> Create speed dial *3001 on device and then...
>
> Note: is unity connection
>
> Option 1
> Create a dn *3001 wi
Hi,
The digit manipulation you've done till the gateway configuration in the
CUCM will stay intact and will be displayed as Called Number from the
calling phone. However, you could choose not to display the digit
manipulation done in H.323 gateway. Here are the options;
voice service voip
no supp
Hi,
That's correct, as AAR would use PSTN to call the Deskphone, It'd rather
call the RDN instead of Deskpone, you see anyway its a PSTN Call.
Cheers,
Laksh
On Sun, Sep 8, 2013 at 8:56 PM, Ovidiu Popa wrote:
> Hello everyone
>
> Can anyone confirm the following results ?
> A - If Mobile Conn