Did you try the no shutdown command?
Tue, 29 Mar 2011 13:17:25 -0400 письмо от "bkvalent...@gmail.com" <bkvalent...@gmail.com>: Possibly a replication issue?... is ccm3 the Pub? Sent from my Verizon Wireless Phone ----- Reply message ----- From: "Shrini" <linuxbos...@gmail.com> Date: Tue, Mar 29, 2011 12:44 pm Subject: [OSL | CCIE_Voice] Hardware conference is stuck in state "TCP_CONN_ERROR" To: "Rahul Kapor" <rahul.kapo...@gmail.com> Cc: <ccie_voice@onlinestudylist.com> Try this. voice card x no dspfarm dsp services dspfarm copy the sccp config delete all and paste again. It will fix your issue Thanks Shrini On 3/29/2011 8:32 AM, Rahul Kapor wrote: > Hi All, > > I did reset , reload , no sccp , sccp but did not help. DIf f conf > bridge from diff router can be registered with CUCM so looks like , > PVDM has gone into hung state. > Is there any way to reset the PVDM ? > > th, > Rahul > > On Tue, Mar 29, 2011 at 8:30 PM, Rogers Ochieng > <rogersochi...@gmail.com <mailto:rogersochi...@gmail.com>> wrote: > > Since i think this is CUCM with SRST scenario. Try this > sccp local GigabitEthernet0/0 > sccp ccm 14.160.115.200 identifier 1 version 7.0 > sccp ccm 14.160.116.40 identifier 2 version 7.0 > sccp ccm 14.160.110.22 identifier 3 version 7.0 > sccp > sccp ccm group 1 > associate ccm 1 priority 1 > associate ccm 2 priority 2 > associate ccm 3 priority 3 > associate profile 1 register BR1-CONF > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > > maximum sessions 1 > conference-join custom-cptone join > conference-leave custom-cptone leave > associate application SCCP > ! > telephony-service > sdspfarm units 1 > sdspfarm tag 1 BR1-CONF > conference hardware > ephone-dn 10 octo-line > number B3333 > conference meet-me > no huntstop > > On 29 March 2011 14:31, Rahul Kapor <rahul.kapo...@gmail.com > <mailto:rahul.kapo...@gmail.com>> wrote: > > Hi All , > > thanks for replying. > here is my sccp config > > sccp local GigabitEthernet0/0 > sccp ccm 14.160.115.200 identifier 1 version 7.0 > sccp ccm 14.160.116.40 identifier 2 version 7.0 > sccp ccm 14.160.110.22 identifier 3 version 7.0 > sccp > sccp ccm group 1 > associate ccm 3 priority 1 > associate profile 1 register BR1-CONF > > dspfarm profile 1 conference > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 1 > conference-join custom-cptone join > conference-leave custom-cptone leave > associate application SCCP > ! > > I am adding Hardware conf in CUCM as BR1-CONF but status is > unknown-unknown. > sh sccp > SCCP Admin State: UP > Gateway Local Interface: GigabitEthernet0/0 > IPv4 Address: 14.160.110.35 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 14.160.115.200, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > Call Manager: 14.160.116.40, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 2 > Trustpoint: N/A > Call Manager: 14.160.110.22, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 3 > Trustpoint: N/A > > > Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: > TCP_CONN_ERROR > Active Call Manager: NONE > TCP Link Status: CONNECT_PENDING, Profile Identifier: 1 > Reported Max Streams: 8, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization > Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum > Packetization Period: 30 > > reloaded the router again but no help. > > thx, > Rahul > > > > > > On Tue, Mar 29, 2011 at 12:28 PM, Rogers Ochieng > <rogersochi...@gmail.com <mailto:rogersochi...@gmail.com>> wrote: > > Your sccp and telephony service config will help > > On 28 March 2011 18:57, Rahul Kapor > <rahul.kapo...@gmail.com <mailto:rahul.kapo...@gmail.com>> > wrote: > > > Hi all , > > I am trying to register my hardware conference to > cucm/cme but it is stuck in "TCP_CONN_ERROR" error > state. > > sh sccp > Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause > Code: TCP_CONN_ERROR > Active Call Manager: NONE > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com (http://www.ipexpert.com)
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com