fine even
when on SRST mode . but I will test today with "MGCPAPP" and "call
application alternate" to see what happens.
Regards.
//Mo
On Sat, Oct 25, 2008 at 8:28 AM, Balamurugan Singaram
<[EMAIL PROTECTED]>wrote:
> Hi,
>
> For Cisco IOS Software Release 12
Thank you Mike .
You not only answered my question but also answered the other questions
that i,m sure i was going to face later on . specially about the Frame
relay shaping command on physical interface
cheers .:)
//Mo
On Fri, Oct 24, 2008 at 8:39 PM, Mark Snow <[EMAIL PROTECTED]>
lass class-default
fair-queue
raise one question on my mind and that,s the Cisco recommendation to always
reserver 5% for over head.
Again thank you guys and appreciate your comments on this one .
Regards.
Mo.
On Fri, Oct 24, 2008 at 7:28 PM, Mark
.."and assign it to class-map and remark it with policy-map
Please advice .
Best of regards.
Mo.
On Sun, Oct 19, 2008 at 10:31 PM, Gruela, Ramil <[EMAIL PROTECTED]>wrote:
> 256 divided by total bandwidth maybe? I don't know. Can't assign
> "priority" to mu
Hi everybody . hope you all having a good day .
got a question about QOS LLQ .
as far as i understand to reserve amount of bandwidth for media and control
where media=256kbps and SIG=8 kbps
Class RTP
priority 256---> 256 Kbps of which bandwidth, Interface or CIR or
MINCIR
Class SIG
Bandwidth
could be a lot of different reasons , but a good place to
start troubleshooting is checking ip phone call status.
when you have your call connected to IP Phone, double press the "?" on
7940 and 7960 series to see if the call is connected and you have TX/RX
bytes , also check the TX/RX codec .
Thanks JD.
pretty useful information about lab and how to approach the questions ,
do you have any information about LAB Exam topic points?
for example
QOS 10points
IPIPGW 10 points
On Thu, Sep 25, 2008 at 5:46 AM, David Blair <[EMAIL PROTECTED]>wrote:
> There is no book from Cisco Press or othe