Hi Guys
I am doing a lab and little confused with the proposed solution.
The requirement is that on interface queue 2 queue 3 queue 4 should share
bandwidth as 20 40 40 percentage.
Now what's the best answer.
Interface f1/0/1
Srr-queue bandwidth share 1 2 4 4
Or
Interface f1/0/1
Hi Guys
Regarding the mls qos trust command.
If the question demands to trust dscp values.
On the interface connected to the phone. If I configure mls qos trust dscp and
mls qos trust device cisco-phone.
Does this means that the interface will trust the incoming dscp only if it's
Hello guys.
I am doing a lab where my gatekeeper is cube as well. When I ring pstn
number 0091! The cucm phones shows connected and pstn phone still ringing.
To fix it I uncheck wait for TCS far end capabilities. That seems to fix the
issue because cube is involved in this scenario.
have a total
value they are looking for and anything within a certain percent is
valid. I don't remember if it was 10 or 20 percent but it is
generous. As for 95% or not would depend on how the question is
worded, if unsure ask the proctor.
HTH,
Chris
On 9/27/11, Nowork_onlyfun
Hi Guys.
I Am little confused with qos calculations. Qos srnd uses a different
value for header. Cucm srnd has different values. When I watch vik's solutions.
He is using a different values all together.
Now which one is right ?
For example.
MLP. Qos srnd says 13 bytes. Cucm