Hey guys,
I am on the proctorlabs rack and kinda stuck and brainfreezed. I use
hardware VPN and downloaded & installed CUPC 7.0.1 on my laptop. I am able
to login to CUPC however I can't switch presence status (shows OFFLINE) or
go to Deskphone mode.
Softphone and Voicemail appear to be working f
What drives as to how the CUE will integrate with CME or UCM - the type of
license installed on the CUE?
I was working on the ProctorLabs rack over the weekend and the task was to
integrate CUE with BR2 CME. However when I ran the initialization wizard on
the CUE GUI, it started asking me about Ca
> On Thu, Dec 1, 2011 at 4:33 AM, Priyank Kiran wrote:
>
>> Thanks, now do you guys know if this is going to be addressed in later
>> revisions of CUCM (8.x) OR changing from H323 to SIP would help?
>>
>> OR may be its just the way MTP behaves and you just can'
Behalf Of *Robert Thomas
> *Sent:* Saturday, November 26, 2011 10:43 AM
> *To:* Divin Mathew John
> *Cc:* ccie_voice@onlinestudylist.com; Priyank Kiran
> *Subject:* Re: [OSL | CCIE_Voice] Need help understanding this behavior***
> *
>
> ** **
>
> Divin is right. MTP doesnt su
It does
On Thursday, November 24, 2011, Mohd Baqari
wrote:
> The MRGL of MTP should have MoH multicast.
>
> Regards,
> Mohammed Al Baqari
> Sent from my iPhone
> On Nov 25, 2011, at 1:57 AM, Priyank Kiran
wrote:
>
> No it's not, have 2 MRGLs
>
> 1) MRGL at
bound to mrg-moh.
On Thu, Nov 24, 2011 at 4:44 PM, Mohd Baqari wrote:
> What is the MRGL assigned to the device pool of your MTP. Is it the same
> MoH multicast MRGL.
>
> Regards,
> Mohammed Al Baqari
>
> Sent from my iPhone
>
> On Nov 24, 2011, at 9:50 PM, Priyank
:
> And what's the Regiong settings between the GW to MoH and and GW to IP
> Phones?
>
> If everything is G711, then maybe the Multicast cannot traverse the MTP?
>
> On Fri, Nov 25, 2011 at 12:36 AM, Priyank Kiran
> wrote:
>
>> Using G711. The region setting b/w the
gt; transcoded. Based on that, it comes out that the Multicast cannot traverse
> to some proxies, it must be always from the reported source to destination.
> And in your case the MTP comes out as some kind of proxy, and that's why
> the Multicast MoH does not work. I do not know, wh
Experts,
Need help understanding the following behavior conceptually -
Have the subscriber as dedicated MOH multicast server incrementing on port
with default address 239.1.1.1 port 16384
Remote H323 gateway, with local music-on-hold wav file spoofing the above
source address.
This works as expec
Thanks Shrini, that did it !!!
On Sun, Nov 6, 2011 at 2:45 PM, Shrini wrote:
> Hi Priyank,
>
> is the 3550 inline power or PoE , try adding this command under the port
> fa0/4 "power inline delay shut 20 initial 300"
> *
>
>
> *
> On 11/6/2011 9:41 AM, Pr
Experts,
I connect to proctorlabs using the hardware ezvpn option with a 3550
switch. I am getting these errors on the swicth ports for my 7962 phones
and it shuts; powers up with this error again and shuts -
*%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/4 :
Power given, b
7961 are associated to the user.
>>
>> The user is assigned to the DN on both devices.
>>
>> The user is listed as a UserID on both devices.
>>
>> CUPS is 7.0(2); CUCM is 7.0(1)
>>
>>
>>
>> Jonathan
>>
>> On Tue, Jun 9, 2009 at 8:39 P
Make sure the setting for Primary Extension on the user page looks OK. If
both the softphone and deskphone share the same extension, you should be OK
after switching the application from softphone to deskphone.
-Priyank
On Tue, Jun 9, 2009 at 4:29 PM, Jonathan Charles wrote:
> OK, so we basi
What is your dial-peer look like on the outbound gateway when you make
this change?
On 2/21/09, Mike O wrote:
>
> I have a weird problem with route patterns in CM7. I can create a 911
> pattern and it dials out to the PSTN no problems, I can see the Q931 debug
> scroll across.
>
>
>
> Now if I
Hello all,
I am thinking of setting up a home voice lab so I can study whenevere I get
time off from work and not tied for the entire 8 hours. Please let me know
if any one is trying to sell their lab or any ideas where to go about and
setup and procure my own lab @ a reasonable price.
I live her
Guys,
What script editor should I be installing on my PC for writing and
practicing IPCC scripts. Can I download them from Cisco'c website and
install on my PC. Please send me the link to the download page OR let me
know where I can get one.
Thank you !
Priyank.
Hey guys,
I have been getting this error on CUE when I try to integrate with the Call
Manager [ver 4.3(3)]
The error reads:
*Saved successfully.*
*Web Login Failed. Error while determining CCM version -1*
*JTAPI Login Failed. Error while determining CCM version -1*
Nothing has been changed & I
hings for me atleast a little bit. I have
> decide to scrap the configs and downgrade the SME version.
>
> Thanks for all the help. Will keep you posted if I am able to resolve
> this.
>
> Regards,
>
>
>
> On Jan 31, 2008 11:59 AM, ovais Iqbal <[EMAIL PROTECTED]>
> will be in a down state, run the command "sh dial-peer voice summ"
>
> I guess you should start your telephony-service setup from scratch as I
> indicated to you yesterday.
>
> Thanks
>
> Ovais
>
>
> On 1/31/08, Priyank Kiran <[EMAIL PROTECTED]> wrote:
&
This is my last throw at the config (scaled-down version). After this, I am
thinking it to downgrade to CME version 4.0 (though it doesn't make any
sense to me) .
I would love if you guys can look at this cut-down verion of the config and
the "debugs" and let me know for any ideas that you may
nd and test it.
>
> some times you have to re do the CME configs for abnormal behaviours.
>
> Thanks
>
> Ovais.
>
>
>
> On 1/30/08, Priyank Kiran <[EMAIL PROTECTED]> wrote:
> >
> > Ovais:
> >
> > Thanks for the repsonse. Did all whatever
r wise
> the best thing with CME would be to do two things as follows:
>
> - reset the phones or
> - reload the router.
>
> Thanks
>
> Ovais.
>
>
> On 1/30/08, Priyank Kiran <[EMAIL PROTECTED]> wrote:
> >
> > Hi,
> >
> > What could be th
Hi,
What could be the reason for the secondary-dialtone not working on a CME
router ? I have the command "secondary-dialtone 9" under the
telephony-service.
Thank you !
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.240.1 192.168.240.50
ip dhcp excluded-address 192.168.240.
Hello !
I want to use a device that will act as a PSTN. Is there a way I can
configure a router to serve as PSTN simulator for study purposes. If yes,
please let me know and what I should be doing to accomlish this.
Thanks!
Hello guys !
This is first post & here are my queries below:
1] Is there a BIG difference between "voice translation-rules" &
"translation rules". If yes, then what scenarious would you be likely using
them.
2] I was working on my voice translation rules and looks like I get a bit
confused with
25 matches
Mail list logo